Network Working Group K. White
Request for Comments: 2758 IBM Corp.
Category: Experimental February 2000
Definitions of Managed Objects for Service Level
Agreements Performance Monitoring
Status of this Memo
このメモの位置付け
This memo defines an Experimental Protocol for the Internet community. It does not specify an Internet standard of any kind. Discussion and suggestions for improvement are requested. Distribution of this memo is unlimited.
このメモはインターネットコミュニティのためにExperimentalプロトコルを定義します。それはどんな種類のインターネット標準を指定しません。改善のための議論や提案が要求されています。このメモの配布は無制限です。
Copyright Notice
著作権表示
Copyright (C) The Internet Society (2000). All Rights Reserved.
著作権（C）インターネット協会（2000）。全著作権所有。
Abstract
抽象
This memo defines a Management Information Base (MIB) for performance monitoring of Service Level Agreements (SLAs) defined via policy definitions. The MIB defined herein focuses on defining a set of objects for monitoring SLAs and not on replication of the content of the policy definitions being monitored. The goal of the MIB defined within this document is to defined statistics related to a policy rule definition for reporting on the effect that a policy rule has on a system and to defined a method of monitoring this data.
このメモは、ポリシー定義で定義サービスレベル契約（SLA）のパフォーマンス監視のための管理情報ベース（MIB）を定義します。本明細書に定義されるMIBは、監視されているポリシー定義の内容の複製にSLAを監視していないためにオブジェクトのセットを定義することに焦点を当てています。このドキュメント内で定義されたMIBの目標は、政策ルールがシステムに及ぼす影響に、このデータを監視する定義されたメソッドに報告するためのポリシールールの定義に関連する定義された統計にあります。
Table of Contents
目次
1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . 2
2.0 The SNMP Network Management Framework . . . . . . . . . . 2
3.0 Structure of the MIB . . . . . . . . . . . . . . . . . . . 3
3.1 Scalar objects . . . . . . . . . . . . . . . . . . . . . . 4
3.2 slapmPolicyNameTable . . . . . . . . . . . . . . . . . . . 5
3.3 slapmPolicyRuleStatsTable . . . . . . . . . . . . . . . . 6
3.4 slapmPRMonTable . . . . . . . . . . . . . . . . . . . . . 6
3.5 slapmSubcomponentTable . . . . . . . . . . . . . . . . . . 8
4.0 Definitions . . . . . . . . . . . . . . . . . . . . . . . 8
5.0 Security Considerations . . . . . . . . . . . . . . . . . 67
6.0 Intellectual Property . . . . . . . . . . . . . . . . . . 67
7.0 Acknowledgments . . . . . . . . . . . . . . . . . . . . . 68
8.0 References . . . . . . . . . . . . . . . . . . . . . . . . 68
9.0 Author's Address . . . . . . . . . . . . . . . . . . . . . 70
10.0 Full Copyright Statement . . . . . . . . . . . . . . . . 71
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119, reference [13].
この文書のキーワード "MUST"、 "MUST NOT"、 "REQUIRED"、、、、 "べきではない" "べきである" "ないもの" "ものとし"、 "推奨"、 "MAY"、および "OPTIONAL" はありますRFC 2119に記載されるように解釈される、[13]を参照。
This document's purpose is to define a MIB module for performance management of Service Level Agreements (SLAs). It is assumed that an SLA is defined via policy schema definitions. The policy definitions being modeled with respect to performance management is primarily related to network Quality of Service (QOS). There are a number of methods that exist for defining and administering policy. Definition of these methods is considered out side of the scope of this document.
このドキュメントの目的は、サービスレベル契約（SLA）のパフォーマンス管理のためのMIBモジュールを定義することです。 SLAは、ポリシースキーマ定義で定義されているものとします。パフォーマンス管理に対してモデル化されているポリシー定義は、主にサービス品質（QoS）をネットワークに関連しています。ポリシーを定義し、管理するために存在する多くの方法があります。これらのメソッドの定義は、この文書の範囲の側面外と考えられています。
The MIB module defined within this memo has been modeled using the various versions of the schema definitions being developed within the Policy Framework Working Group in the IETF. The content of the MIB defined within this memo has evolved along with the Policy Framework Working Group schema definitions.
このメモ内で定義されたMIBモジュールは、IETFでのポリシーフレームワーク作業部会の中で開発されているスキーマ定義のさまざまなバージョンを使用してモデル化されています。このメモの中に定義されたMIBの内容は、ポリシーフレームワークワーキンググループのスキーマ定義と一緒に進化してきました。
The SNMP Management Framework presently consists of five major components:
SNMP Management Frameworkは現在、5つの主要コンポーネントから構成されています。
o An overall architecture, described in RFC 2571 [7].
RFC 2571に記載され、全体的なアーキテクチャ、O [7]。
o Mechanisms for describing and naming objects and events for the purpose of management. The first version of this Structure of Management Information (SMI) is called SMIv1 and described in STD 16, RFC 1155 [14], STD 16, RFC 1212 [15] and RFC 1215 [16]. The second version, called SMIv2, is described in STD 58, RFC 2578 [3], STD 58, RFC 2579 [4] and STD 58, RFC 2580 [5].
管理の目的のためにオブジェクトとイベントを記述し、命名するためのメカニズムO。管理情報（SMI）のこの構造体の最初のバージョンでSMIv1と呼ばれ、STD 16に記載され、RFC 1155 [14]、STD 16、RFC 1212 [15]およびRFC 1215 [16]。 SMIv2のと呼ばれる第二のバージョン、STD 58、RFC 2578に記載されている[3]、STD 58、RFC 2579 [4]とSTD 58、RFC 2580 [5]。
o Message protocols for transferring management information. The first version of the SNMP message protocol is called SNMPv1 and described in STD 15, RFC 1157 [1]. A second version of the SNMP message protocol, which is not an Internet standards track protocol, is called SNMPv2c and described in RFC 1901 [17] and RFC 1906 [18]. The third version of the message protocol is called SNMPv3 and described in RFC 1906 [18], RFC 2572 [8] and RFC 2574 [10].
管理情報を転送するためのOメッセージプロトコル。 SNMPメッセージプロトコルの最初のバージョンは、[1]のSNMPv1と呼ばれ、STD 15、RFC 1157に記載されています。インターネット標準トラックプロトコルでないSNMPメッセージプロトコルの第2のバージョンは、SNMPv2cのと呼ばれ、RFC 1901 [17]およびRFC 1906 [18]に記載されています。第3のメッセージプロトコルのバージョンのSNMPv3と呼ばれ、RFC 1906年に記載されている[18]、RFC 2572 [8]およびRFC 2574 [10]。
o Protocol operations for accessing management information. The first set of protocol operations and associated PDU formats is described in STD 15, RFC 1157 [1]. A second set of protocol
管理情報にアクセスするためのOプロトコル操作。プロトコル操作と関連PDU形式の第一セットは、STD 15、RFC 1157に記載されている[1]。プロトコルの第2セット
operations and associated PDU formats is described in RFC 1905 [6].
操作と関連PDU形式はRFC 1905に記載されている[6]。
o A set of fundamental applications described in RFC 2573 [9] and the view-based access control mechanism described in RFC 2575 [11].
O RFC 2573に記載の基本アプリケーションのセット[9]およびRFC 2575 [11]に記載のビューベースアクセス制御機構。
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the mechanisms defined in the SMI.
管理対象オブジェクトが仮想情報店を介してアクセスされ、管理情報ベースまたはMIBと呼ばれます。 MIBのオブジェクトは、SMIで定義されたメカニズムを使用して定義されています。
This memo specifies a MIB module that is compliant to the SMIv2. A MIB conforming to the SMIv1 can be produced through the appropriate translations. The resulting translated MIB must be semantically equivalent, except where objects or events are omitted because no translation is possible (use of Counter64). Some machine readable information in SMIv2 will be converted into textual descriptions in SMIv1 during the translation process. However, this loss of machine readable information is not considered to change the semantics of the MIB.
このメモはSMIv2に対応であるMIBモジュールを指定します。 SMIv1に従うMIBは、適切な翻訳を介して製造することができます。得られた翻訳されたMIBには翻訳（Counter64のの使用）が可能ではないので、オブジェクトまたはイベントが省略されている場合を除いて、意味的に等価でなければなりません。 SMIv2のいくつかの機械読み取り可能な情報には、翻訳プロセスの間、SMIv1の原文の記述に変換されます。しかし、機械読み取り可能な情報のこの損失がMIBの意味論を変えると考えられません。
The SLAPM-MIB consists of the following components:
SLAPM-MIBは、次のコンポーネントで構成されています。
o scalar objects
スカラーオブジェクトO
o slapmPolicyNameTable
O slapmPolicyNameTable
o slapmPolicyRuleStatsTable (equivalent to the deprecated slapmPolicyStatsTable)
slapmPolicyRuleStatsTable O（旧式slapmPolicyStatsTableに相当）
o slapmPRMonTable (equivalent to the deprecated slapmPolicyMonitorTable)
slapmPRMonTable O（旧式slapmPolicyMonitorTableに相当）
o slapmSubcomponentTable
O slapmSubcomponentTable
Refer to the compliance statement defined within SLAPM-MIB for a definition of what objects and notifications MUST be implemented by all systems as opposed to those that MUST be implemented by end systems only.
唯一のエンドシステムによって実装されなければならないものとは対照的に、すべてのシステムによって実装されなければならないものをオブジェクトと通知の定義についてSLAPM-MIB内で定義されたコンプライアンス声明を参照してください。
Initially most of the tables defined by the MIB module within this document where directly indexed using a policy's name and a subordinate traffic profile name. Over time the structure and resulting naming has grown more complex and as such has exceeded the capacity of being used as a direct MIB table index. As a result of this the original tables (slapmPolicyStatsTable and slapmPolicyMonitorTable) have been deprecated and replaced with new tables that use an Unsigned32 index element instead of "names". A new table has been defined, slapmPolicyNameTable, that maps the Unsigned32 index to a unique name associated with a given policy rule definition.
直接ポリシーの名前と従属トラフィックプロファイル名を使用して索引付け、このドキュメント内のMIBモジュールで定義されたテーブルの最初ほとんど。経時的構造、そして得られた命名は、より複雑な成長している、そのようなものとして直接MIBテーブルインデックスとして使用されているの容量を超えています。この結果、元の表（slapmPolicyStatsTableとslapmPolicyMonitorTable）は、代わりに「名前」のUnsigned32のインデックス要素を使用して新しいテーブルで非推奨と置き換えられました。新しいテーブルは、与えられたポリシールールの定義に関連付けられた一意の名前にUnsigned32のインデックスをマップslapmPolicyNameTableを、定義されています。
Global objects defined within SLAPM-MIB:
SLAPM-MIB内に定義されたグローバルオブジェクト：
o slapmSpinLock
O slapmSpinLock
Enables multiple management application access to SLAPM-MIB. An agent MUST implement the slapmSpinLock object to enable management applications to coordinate their use of the SLAPM-MIB. Management application use of slapmSpinLock is OPTIONAL.
SLAPM-MIBに複数の管理アプリケーションへのアクセスを可能にします。エージェントはSLAPM-MIBのそれらの使用を調整するために管理アプリケーションを有効にするslapmSpinLockオブジェクトを実装しなければなりません。 slapmSpinLockの管理アプリケーションの使用は任意です。
o slapmPolicyCountQueries, slapmPolicyCountAccesses, slapmPolicyCountSuccessAccesses, and slapmPolicyCountNotFounds
O slapmPolicyCountQueries、slapmPolicyCountAccesses、slapmPolicyCountSuccessAccesses、およびslapmPolicyCountNotFounds
Basic statistics on the amount of policy directory access that has occurred at a system.
システムで発生した政策のディレクトリへのアクセスの量に関する基本統計。
o slapmPolicyPurgeTime
slapmPolicyPurgeTime上
Used to prevent the entries in various SLAPM-MIB tables that relate to a policy definition from immediately being deleted when the corresponding policy definition no longer exists. This gives management applications time to discover this condition and close out any polled based interval data that may be being collected. All dependent slapmPRMonTable entries are also deleted when its parent slapmPolicyRuleStatsEntry is removed. Refer to the OBJECT description for slapmPolicyPurgeTime for a more precise description of this function.
すぐに対応するポリシーの定義がもう存在しない時に削除されませんされているから、ポリシー定義に関連する様々なSLAPM-MIBテーブルのエントリを防止するために使用されます。これは、管理アプリケーションにこの状態を発見し、収集されている可能性のポーリングベースの間隔データをクローズする時間を与えます。その親slapmPolicyRuleStatsEntryが除去されたときにすべての依存slapmPRMonTableのエントリも削除されます。この機能のより正確な説明についてはslapmPolicyPurgeTimeのためのOBJECTの説明を参照してください。
o slapmPolicyTrapEnable
O slapmPolicyTrapEnable
This object enables or suppresses generation of slapmPolicyRuleDeleted or slapmPolicyRuleMonDeleted notifications.
このオブジェクトは、有効またはslapmPolicyRuleDeletedまたはslapmPolicyRuleMonDeleted通知の生成を抑制することができます。
o slapmPolicyTrapFilter
O slapmPolicyTrapFilter
This object enables suppression of slapmSubcMonitorNotOkay notifications.
このオブジェクトはslapmSubcMonitorNotOkay通知を抑制することができます。
The slapmPolicyNameTable maps a Unsigned32 index to a unique name associated with a given policy rule definition.
slapmPolicyNameTableは、指定されたポリシールールの定義に関連付けられた一意の名前にUnsigned32のインデックスをマッピングします。
Currently, the core schema definition being worked on within the Policy Framework working group defines five general classes: policyGroup, policyRule, policyCondition, policyTimePeriodCondition, and policyAction. "Policies can either be used in a stand-alone fashion or aggregated into policy groups to perform more elaborate functions. Stand-alone policies are called policy rules. Policy groups are aggregations of policy rules, or aggregations of policy groups, but not both." Each policy rule consists of a set of conditions and a set of actions. Policy rules may be aggregated into policy groups.
PolicyGroup、PolicyRuleの、policyCondition、policyTimePeriodCondition、およびpolicyAction：現在、ポリシーフレームワークワーキンググループ内で作業中のコアスキーマ定義は、5つの一般的なクラスを定義します。 「ポリシーは、いずれか、スタンドアロン方式で使用またはより精巧な機能を実行するためのポリシー・グループに集約することができます。ポリシーグループはポリシールールの集合体、またはポリシーグループの集合体です。ポリシーがポリシールールと呼ばれ、スタンドアロン、両方ではありません。 "各ポリシールールは、条件のセットとアクションのセットで構成されています。ポリシールールはポリシー・グループに集約することができます。
"Instances in a directory are identified by distinguished names (DNs), which provide the same type of hierarchical organization that a file system provides in a computer system. A distinguished name is a sequence of relative distinguished names (RDNs), where an RDN provides a unique identifier for an instance within the context of its immediate superior, in the same way that a filename provides a unique identifier for a file within the context of the folder in which it resides."
「ディレクトリ内のインスタンスは、ファイルシステムは、コンピュータシステムに提供することが階層構造の同じタイプを提供する識別名（DN）によって識別される。識別名RDNが提供する相対識別名（のRDN）の配列でありますその直接の優れたのコンテキスト内のインスタンスの一意の識別子、ファイル名は、それが存在するフォルダのコンテキスト内でのファイルの一意の識別子を提供することを同じように「。
Each of these instances can also be named to fit in with the existing DEN practice with a commonName (cn) attribute as oppose to the classes name attribute.
これらの各インスタンスは、クラス名属性に反対するとしてのcommonName（CN）属性を持つ既存のDENの練習で合うように名前を付けることができます。
"The cn, or commonName, attribute is an X.500 attribute. It stands for commonName. It specifies a user-friendly name by which the object is commonly known. This name may be ambiguous by itself. This name is used in a limited scope (such as an organization). It conforms to the naming conventions of the country or culture with which it is associated. CN is used universally in DEN as the naming attribute for a class."
「CN、またはcommonNameの、属性がX.500属性です。それは、commonNameを意味します。これは、オブジェクトが一般的に知られているユーザーフレンドリーな名前を指定します。この名前は、それ自体が曖昧かもしれません。この名前は、限られた中で使用されています（例えば組織のような）範囲は、それが関連付けられている国または文化の命名規則に準拠する。CNクラスのネーミング属性としてDENに普遍的に使用されます。」
An slapmPolicyNameEntry contains a single object, slapmPolicyNameOfRule, that contains the unique name associated with a policy rule instance. An slapmPolicyNameEntry is indexed by a Unsigned32 index, slapmPolicyNameIndex, that is assigned by the implementation of this MIB.
slapmPolicyNameEntryは、ポリシールールのインスタンスに関連付けられた一意の名前が含まれている単一のオブジェクト、slapmPolicyNameOfRuleが含まれています。 slapmPolicyNameEntryは、それは、このMIBの実装によって割り当てられる、Unsigned32のインデックス、slapmPolicyNameIndexによって索引付けされます。
This table is functionally equivalent to the deprecated slapmPolicyStatsTable. The slapmPolicyStatsTable uses the name of both a policy definition and a traffic profile name to index an entry. The slapmPolicyRuleStatsTable uses an slapmPolicyNameEntry index (Unsigned32) instead.
この表は、非推奨slapmPolicyStatsTableと機能的に同等です。 slapmPolicyStatsTableは、インデックスエントリにポリシーの定義およびトラフィックプロファイル名の両方の名前を使用しています。 slapmPolicyRuleStatsTable代わりslapmPolicyNameEntryインデックス（Unsigned32の）を使用します。
The slapmPolicyRuleStatsTable is the main table defined by SLAPM-MIB. The primary index for this table is slapmPolicyNameSystemAddress that enables support of multiple systems from a single policy agent. The index element, slapmPolicyNameSystemAddress, value must be either the zero-length octet string when at a policy agent only a single system is being support, 4 octets for a ipv4 address, or 16 octets for a ipv6 address.
slapmPolicyRuleStatsTableはSLAPM-MIBによって定義されたメインテーブルです。このテーブルのプライマリインデックスは、単一のポリシー・エージェントから複数のシステムのサポートを可能slapmPolicyNameSystemAddressあります。ポリシーエージェントで単一のシステムがサポートされているとき、インデックス要素、slapmPolicyNameSystemAddress、値は、IPv4のアドレスのための4つのオクテット、またはIPv6アドレスの16オクテット長さゼロのオクテット文字列のいずれかでなければなりません。
It is possible that on a single system multiple policy agent instances exists. The Entity MIB, refer to [19], should be used to handle the resulting MIBs.
単一システム上で複数のポリシーエージェントのインスタンスが存在することも可能です。エンティティMIBは、[19]を参照し、得られたMIBを処理するために使用されるべきです。
With respect to slapmPolicyNameSystemAddress one slapmPolicyRuleStatsEntry exists for each policy rule instance. Entries in this table are not administered via SNMP. An agent implementation for this table MUST reflect its current set of policy rule instances via table entries. The mechanisms for policy administration are outside of the scope of this memo.
slapmPolicyNameSystemAddress 1 slapmPolicyRuleStatsEntryに対する各ポリシールールインスタンスのために存在します。この表のエントリは、SNMPを介して投与されていません。このテーブルのエージェントの実装は、テーブルのエントリを経由してポリシールールのインスタンスの現在のセットを反映しなければなりません。ポリシー管理のためのメカニズムは、このメモの範囲の外です。
This table is functionally equivalent to the deprecated slapmPolicyMonitorTable. The slapmPolicyMonitorTable uses the name of both a policy definition and a traffic profile name to index an entry. The slapmPRMonTable uses an slapmPolicyNameEntry index (Unsigned32) instead.
この表は、非推奨slapmPolicyMonitorTableと機能的に同等です。 slapmPolicyMonitorTableは、インデックスエントリにポリシーの定義およびトラフィックプロファイル名の両方の名前を使用しています。 slapmPRMonTable代わりslapmPolicyNameEntryインデックス（Unsigned32の）を使用します。
The slapmPRMonTable provides a method of monitoring the effect of SLA policy being used at a system. A management application creates an slapmPRMonEntry for each collection that it requires. The value of the BITS slapmPRMonControl object determines what type of monitoring occurs, at what level to monitor and whether trap support is enabled:
slapmPRMonTableは、システムで使用されているSLAポリシーの効果をモニタリングする方法を提供します。管理アプリケーションは、それが必要とする各コレクションのslapmPRMonEntryを作成します。 BITS slapmPRMonControlオブジェクトの値は、モニタリングのタイプを監視し、トラップサポートが有効になっているか否かをどのレベルで、何が起こるかを判断します。
o monitorMinRate(0)
monitorMinRate（0）
Use the value of slapmPRMonInterval as the interval to determine current traffic in and out rates, using slapmPRMonCurrentInRate and slapmPRMonCurrentOutRate, that can be compared to slapmPRMonMinRateLow for determining when to generate a slapmPolicyRuleMonNotOkay notification. The notification slapmPolicyRuleMonOkay is generated when the problem is resolved. This can be determined by comparing the current rates to slapmPRMonMinRateHigh.
slapmPolicyRuleMonNotOkay通知を生成するときを決定するためslapmPRMonMinRateLowと比較することができるslapmPRMonCurrentInRateとslapmPRMonCurrentOutRateを用いて、速度および外現在のトラフィックを決定するための区間としてslapmPRMonIntervalの値を使用します。問題が解決されたときに通知slapmPolicyRuleMonOkayが生成されます。これはslapmPRMonMinRateHighに現在のレートを比較することによって決定することができます。
o monitorMaxRate(1)
monitorMaxRate（1）
Use the value of slapmPRMonInterval as the interval to determine current traffic in and out rate, using slapmPRMonCurrentInRate and slapmPRMonCurrentOutRate, that can be compared to slapmPRMonMaxRateHigh for determining when to generate a slapmPolicyRuleMonNotOkay notification. The notification slapmPolicyRuleMonOkay is generated when the problem is resolved. This can be determined by comparing the current rates to slapmPRMonMaxRateLow.
slapmPolicyRuleMonNotOkay通知を生成するときを決定するためslapmPRMonMaxRateHighと比較することができるslapmPRMonCurrentInRateとslapmPRMonCurrentOutRateを用いて、速度および外現在のトラフィックを決定するための区間としてslapmPRMonIntervalの値を使用します。問題が解決されたときに通知slapmPolicyRuleMonOkayが生成されます。これはslapmPRMonMaxRateLowに現在のレートを比較することによって決定することができます。
o monitorMaxDelay(2)
monitorMaxDelay（2）
Use the value of slapmPRMonInterval as the interval to determine the current delay. This can be calculated on an aggregate level by averaging the round trip times for all TCP connections associated with the policy definition. For an individual subcomponent its round trip time can be used directly. Compare this value to slapmPRMonMaxDelayHigh for determining when to generate a slapmPolicyRuleMonNotOkay notification. The notification slapmPolicyRuleMonOkay is generated when the problem is resolved. This can be determined by comparing the current rates to slapmPRMonMaxDelayLow.
現在の遅延を決定するための区間としてslapmPRMonIntervalの値を使用します。これは、ポリシー定義に関連付けられているすべてのTCP接続のための往復時間を平均化することによって、集約レベルで計算することができます。個々のサブコンポーネントのためにその往復時間を直接使用することができます。 slapmPolicyRuleMonNotOkay通知を生成するかを決定するためにslapmPRMonMaxDelayHighにこの値を比較してください。問題が解決されたときに通知slapmPolicyRuleMonOkayが生成されます。これはslapmPRMonMaxDelayLowに現在のレートを比較することによって決定することができます。
UDP subcomponents don't support max delay monitoring.
UDPサブコンポーネントは、最大遅延監視をサポートしていません。
o enableAggregateTraps(3)
O enableAggregateTraps（3）
The slapmPRMonitorControl BITS setting, enableAggregateTraps(3), MUST be set in order for any notifications relating to slapmPolicyRuleStatsTable monitoring to be generated.
slapmPRMonitorControl BITS設定は、enableAggregateTraps（3）、生成するslapmPolicyRuleStatsTable監視に関連する通知のために設定しなければなりません。
o enableSubcomponentTraps(4)
サブコンポーネントトラップを有効にする（4）
This slapmPRMonControl BITS setting MUST be set in order for any notifications relating to slapmSubcomponetTable monitoring to be generated. The slapmPRMonControl BITS setting monitorSubcomponents(5) MUST be selected in order for this setting to be allowed.
このslapmPRMonControl BITS設定は、生成されるslapmSubcomponetTable監視に関連する通知のために設定しなければなりません。 monitorSubcomponents（5）を設定slapmPRMonControlビットを許可するこの設定のために選択されなければなりません。
o monitorSubcomponents(5)
monitorSubcomponents（5）
If selected monitor slapmSubcomponentTable entries individually. Note: aggregate policy rule monitoring is always enabled.
個別に選択したモニタslapmSubcomponentTableエントリの場合。注意：集計ポリシールールの監視が常に有効になっています。
The index element slapmPRMonOwnerIndex is used as the first index in slapmPRMonTable in order to enable SNMP VACM security control. The slapmPRMonTable is the only table that supports SNMP RowStatus operations.
インデックス要素slapmPRMonOwnerIndexはSNMP VACMセキュリティ制御を可能にするためにslapmPRMonTableの最初のインデックスとして使用されます。 slapmPRMonTableは、SNMP RowStatusの操作をサポートする唯一のテーブルです。
Entries are made into this table for the protocol entities (policy traffic profile subcomponents) to indicate actual policy rule usage, provide general statistics at either a TCP connection or UDP listener level, and enable subcomponent monitoring.
プロトコルエンティティ（ポリシートラフィックプロファイルサブコンポーネント）は、実際のポリシールールの使用を示すTCP接続またはUDPリスナーレベルのいずれかでの一般的な統計情報を提供し、サブコンポーネントの監視を有効にするためのエントリがこの表の中に形成されています。
SLAPM-MIB DEFINITIONS ::= BEGIN
IMPORTS MODULE-IDENTITY, OBJECT-TYPE, experimental, Integer32, NOTIFICATION-TYPE, Gauge32, Counter32, Unsigned32 FROM SNMPv2-SMI -- RFC2578 TEXTUAL-CONVENTION, RowStatus, TestAndIncr, DateAndTime FROM SNMPv2-TC -- RFC2579 MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- RFC2580 SnmpAdminString FROM SNMP-FRAMEWORK-MIB; -- RFC2571
SNMPv2の-TC FROM RFC2578のTEXTUAL-CONVENTION、RowStatusの、TestAndIncr、のDateAndTime - - のSNMPv2-SMIからの輸入品実験MODULE-IDENTITY、OBJECT-TYPE、構文Integer32、NOTIFICATION-TYPE、Gauge32、Counter32の、Unsigned32のRFC2579のMODULE-COMPLIANCE、OBJECT -GROUP、NOTIFICATION-GROUPのSNMPv2-CONF FROM - SNMP-FRAMEWORK-MIBからのRFC2580のれるSnmpAdminString。 - RFC2571
slapmMIB MODULE-IDENTITY LAST-UPDATED "200001240000Z" -- 24 January 2000 ORGANIZATION "International Business Machines Corp." CONTACT-INFO "Kenneth White
slapmMIBのMODULE-IDENTITY LAST-UPDATED "200001240000Z" - 2000年1月24日ORGANIZATION "されたInternational Business Machines Corp." CONTACT-INFO「ケネス・ホワイト
International Business Machines Corporation
Network Computing Software Division
Research Triangle Park, NC, USA
E-mail: wkenneth@us.ibm.com" DESCRIPTION "The Service Level Agreement Performance Monitoring MIB (SLAPM-MIB) provides data collection and monitoring capabilities for Service Level Agreements (SLAs) policy definitions."
Eメール：wkenneth@us.ibm.com」DESCRIPTION 『サービスレベルアグリーメントのパフォーマンス監視MIB（SLAPM-MIB）は、データの収集とサービスレベル契約（SLA）ポリシー定義のための監視機能を提供します』。
-- Revision history
- 更新履歴
REVISION "200001240000Z" -- 24 January 2000 DESCRIPTION "This version published as RFC 2758."
REVISION "200001240000Z" - 2000年1月24日の説明は "このバージョンはRFC 2758.として公開します"
::= { experimental 88 }
-- Textual Conventions
- テキストの表記法
SlapmNameType ::= TEXTUAL-CONVENTION
STATUS deprecated
DESCRIPTION
"The textual convention for naming entities
within this MIB. The actual contents of an object
defined using this textual convention should consist
of the distinguished name portion of an name.
This is usually the right-most
portion of the name. This convention is necessary,
since names within this MIB can be used as index
items and an instance identifier is limited to 128
subidentifiers.
This textual convention has been deprecated. All of the tables defined within this MIB that use this textual convention have been deprecated as well since the method of using a portion of the name (either of a policy definition or of a traffic profile) has been replaced by using an Unsigned32 index. The new slapmPolicyNameTable would then map the Unsigned32 index to a real name." SYNTAX SnmpAdminString (SIZE(0..32))
このテキストの表記法は廃止されました。このテキストの表記法を使用して、このMIB内で定義されたテーブルのすべてが、以降も同様に廃止されている名前（ポリシー定義のか、トラフィックプロファイルのいずれか）の部分を使用する方法は、Unsigned32のインデックスを使用することによって置き換えられました。新しいslapmPolicyNameTableは、実際の名前にUnsigned32のインデックスをマップする。」SYNTAXれるSnmpAdminString（SIZE（0 32））
SlapmStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention for defining the various
slapmPRMonTable (or old slapmPolicyMonitorTable)
and the slapmSubcomponentTable states for actual policy
rule traffic monitoring."
SYNTAX BITS {
slaMinInRateNotAchieved(0),
slaMaxInRateExceeded(1),
slaMaxDelayExceeded(2),
slaMinOutRateNotAchieved(3),
slaMaxOutRateExceeded(4),
monitorMinInRateNotAchieved(5),
monitorMaxInRateExceeded(6),
monitorMaxDelayExceeded(7),
monitorMinOutRateNotAchieved(8),
monitorMaxOutRateExceeded(9)
}
｝
SlapmPolicyRuleName ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1024t"
STATUS current
DESCRIPTION
"To facilitate internationalization, this TC
represents information taken from the ISO/IEC IS
10646-1 character set, encoded as an octet string
using the UTF-8 character encoding scheme described
in RFC 2044. For strings in 7-bit US-ASCII,
there is no impact since the UTF-8 representation
is identical to the US-ASCII encoding."
SYNTAX OCTET STRING (SIZE (0..1024))
-- Top-level structure of the MIB
- MIBのトップレベルの構造
slapmNotifications OBJECT IDENTIFIER ::= { slapmMIB 0 }
slapmObjects OBJECT IDENTIFIER ::= { slapmMIB 1 }
slapmConformance OBJECT IDENTIFIER ::= { slapmMIB 2 }
-- All scalar objects
- すべてのスカラーオブジェクト
slapmBaseObjects OBJECT IDENTIFIER ::= { slapmObjects 1 }
-- Scalar Object Definitions
- スカラオブジェクト定義
slapmSpinLock OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An advisory lock used to allow cooperating applications
to coordinate their use of the contents of this MIB. This
typically occurs when an application seeks to create an
new entry or alter an existing entry in
slapmPRMonTable (or old slapmPolicyMonitorTable). A
management implementation MAY utilize the slapmSpinLock to
serialize its changes or additions. This usage is not
required. However, slapmSpinLock MUST be supported by
agent implementations."
::= { slapmBaseObjects 1 }
slapmPolicyCountQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION
slapmPolicyCountQueriesのOBJECT-TYPE SYNTAXカウンタACCESS read-onlyステータス現在の説明
"The total number of times that a policy lookup occurred
with respect to a policy agent.
This is the number of times that a reference was made to
a policy definition at a system and includes the number
of times that a policy repository was accessed,
slapmPolicyCountAccesses. The object
slapmPolicyCountAccesses should be less than
slapmPolicyCountQueries when policy definitions are
cached at a system."
::= { slapmBaseObjects 2 }
slapmPolicyCountAccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of times that a policy repository was
accessed with respect to a policy agent.
The value of this object should be less than
slapmPolicyCountQueries, since typically policy entries
are cached to minimize repository accesses."
::= { slapmBaseObjects 3 }
slapmPolicyCountSuccessAccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful policy repository accesses
with respect to a policy agent."
::= { slapmBaseObjects 4 }
slapmPolicyCountNotFounds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of policy repository accesses,
with respect to a policy agent, that
resulted in an entry not being located."
::= { slapmBaseObjects 5 }
slapmPolicyPurgeTime OBJECT-TYPE SYNTAX Integer32 (0..3600) -- maximum of 1 hour UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION
slapmPolicyPurgeTimeのOBJECT-TYPE構文Integer32（0..3600） - 最大1時間単位 "秒" のMAX-ACCESS読み取りと書き込みステータス現在の説明
"The purpose of this object is to define the amount
of time (in seconds) to wait before removing an
slapmPolicyRuleStatsEntry (or old slapmPolicyStatsEntry)
when a system detects that the associated policy
definition has been deleted. This gives any polling
management applications time to complete their last poll
before an entry is removed. An slapmPolicyRuleStatsEntry
(or old slapmPolicyStatsEntry) enters the
deleteNeeded(3) state via slapmPolicyRuleStatsOperStatus
(or old slapmPolicyStatsOperStatus) when a system first
detects that the entry needs to be removed.
Once slapmPolicyPurgeTime has expired for an entry in deleteNeeded(3) state it is removed a long with any dependent slapmPRMonTable (or slapmPolicyMonitorTable) entries.
slapmPolicyPurgeTimeはdeleteNeeded内のエントリの有効期限が切れていると（3）は、任意の依存slapmPRMonTable（又はslapmPolicyMonitorTable）エントリを有する長い外した状態。
A value of 0 for this option disables this function and results in the automatic purging of slapmPRMonTable (or slapmPolicyTable) entries upon transition into deleteNeeded(3) state.
このオプションの値が0の場合、この関数とslapmPRMonTable（又はslapmPolicyTable）deleteNeeded（3）状態に遷移する際のエントリの自動消去における結果を無効にします。
A slapmPolicyRuleDeleted (or slapmPolicyProfileDeleted)
notification is sent when an slapmPolicyRuleStatsEntry (or
slapmPolicyStatsEntry) is removed. Dependent
slapmPRMonTable (or slapmPolicyMonitorTable)
deletion results in a slapmPolicyRuleMonDeleted (or
slapmPolicyMonitorDeleted) notification being sent.
These notifications are suppressed if the value of
slapmPolicyTrapEnable is disabled(2)."
DEFVAL { 900 } -- 15 minute default purge time
::= { slapmBaseObjects 6 }
slapmPolicyTrapEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether slapmPolicyRuleDeleted and
slapmPolicyRuleMonDeleted (or slapmPolicyProfileDeleted
and slapmPolicyMonitorDeleted) notifications should be
generated by this system."
DEFVAL { disabled }
::= { slapmBaseObjects 7 }
slapmPolicyTrapFilter OBJECT-TYPE SYNTAX Integer32 (0..64) UNITS "intervals"
slapmPolicyTrapFilterのOBJECT-TYPE構文Integer32（0 64）UNITS "間隔"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The purpose of this object is to suppress unnecessary
slapmSubcMonitorNotOkay (or
slapmSubcomponentMonitoredEventNotAchieved), for example,
notifications. Basically, a monitored event has to
not meet its SLA requirement for the number of
consecutive intervals indicated by the value of this
object."
DEFVAL { 3 }
::= { slapmBaseObjects 8 }
slapmTableObjects OBJECT IDENTIFIER ::= { slapmObjects 2 }
-- Sla Performance Monitoring Policy Statistics Table
- SLAパフォーマンス監視ポリシーの統計情報の表
slapmPolicyStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SlapmPolicyStatsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Provides statistics on all policies known at a system.
SlapmPolicyStatsEntry MAX-ACCESSステータス非難された説明OF slapmPolicyStatsTable OBJECT-TYPE構文配列「システムで知られているすべてのポリシーの統計情報を提供します。
This table has been deprecated and replaced with
the slapmPolicyRuleStatsTable. Older implementations of
this MIB are expected to continue their support of this
table."
::= { slapmTableObjects 1 }
slapmPolicyStatsEntry OBJECT-TYPE SYNTAX SlapmPolicyStatsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Defines an entry in the slapmPolicyStatsTable. This table defines a set of statistics that is kept on a per system, policy and traffic profile basis. A policy can be defined to contain multiple traffic profiles that map to a single action.
slapmPolicyStatsEntryのOBJECT-TYPE SYNTAX SlapmPolicyStatsEntry MAX-ACCESSステータスは非難された説明は「slapmPolicyStatsTableにエントリを定義します。この表には、システムごとに、ポリシーおよびトラフィックプロファイルに基づい保たれている統計情報のセットを定義します。ポリシーが定義することができます単一のアクションにマップする複数のトラフィックプロファイルが含まれています。
Entries in this table are not created or deleted via SNMP but reflect the set of policy definitions known at a system." INDEX { slapmPolicyStatsSystemAddress, slapmPolicyStatsPolicyName, slapmPolicyStatsTrafficProfileName
この表のエントリを作成またはSNMP経由で削除されたが、システムで知られているポリシー定義のセットを反映していない。」INDEX {slapmPolicyStatsSystemAddress、slapmPolicyStatsPolicyName、slapmPolicyStatsTrafficProfileName
}
::= { slapmPolicyStatsTable 1 }
SlapmPolicyStatsEntry ::=
SEQUENCE {
slapmPolicyStatsSystemAddress OCTET STRING,
slapmPolicyStatsPolicyName SlapmNameType,
slapmPolicyStatsTrafficProfileName SlapmNameType,
slapmPolicyStatsOperStatus INTEGER,
slapmPolicyStatsActiveConns Gauge32,
slapmPolicyStatsTotalConns Counter32,
slapmPolicyStatsFirstActivated DateAndTime,
slapmPolicyStatsLastMapping DateAndTime,
slapmPolicyStatsInOctets Counter32,
slapmPolicyStatsOutOctets Counter32,
slapmPolicyStatsConnectionLimit Integer32,
slapmPolicyStatsCountAccepts Counter32,
slapmPolicyStatsCountDenies Counter32,
slapmPolicyStatsInDiscards Counter32,
slapmPolicyStatsOutDiscards Counter32,
slapmPolicyStatsInPackets Counter32,
slapmPolicyStatsOutPackets Counter32,
slapmPolicyStatsInProfileOctets Counter32,
slapmPolicyStatsOutProfileOctets Counter32,
slapmPolicyStatsMinRate Integer32,
slapmPolicyStatsMaxRate Integer32,
slapmPolicyStatsMaxDelay Integer32
}
slapmPolicyStatsSystemAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0 | 4 | 16))
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Address of a system that an Policy definition relates to.
A zero length octet string must be used to indicate that
only a single system is being represented.
Otherwise, the length of the octet string must be
4 for an ipv4 address or 16 for an ipv6 address."
::= { slapmPolicyStatsEntry 1 }
slapmPolicyStatsPolicyName OBJECT-TYPE
SYNTAX SlapmNameType
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Policy name that this entry relates to."
::= { slapmPolicyStatsEntry 2 }
slapmPolicyStatsTrafficProfileName OBJECT-TYPE
SYNTAX SlapmNameType
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The name of a traffic profile that is associated with
a policy."
::= { slapmPolicyStatsEntry 3 }
slapmPolicyStatsOperStatus OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2), deleteNeeded(3) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The state of a policy entry:
slapmPolicyStatsOperStatusのOBJECT-TYPE SYNTAX INTEGER {非アクティブ（1）、アクティブ（2）、deleteNeeded（3）} MAX-ACCESS read-onlyステータス非難された説明「ポリシーエントリの状態：
inactive(1) - An policy entry was either defined
by local system definition or
discovered via a directory search
but has not been activated (not
currently being used).
active(2) - Policy entry is being used to affect
traffic flows.
deleteNeeded(3) - Either though local implementation
dependent methods or by discovering
that the directory entry corresponding
to this table entry no longer
exists and slapmPolicyPurgeTime needs
to expire before attempting to remove
the corresponding slapmPolicyStatsEntry
and any dependent slapmPolicyMonitor
table entries.
Note: a policy traffic profile in a state other than
active(1) is not being used to affect traffic flows."
::= { slapmPolicyStatsEntry 4 }
slapmPolicyStatsActiveConns OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of active TCP connections that are
affected by the corresponding policy entry."
::= { slapmPolicyStatsEntry 5 }
slapmPolicyStatsTotalConns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of total TCP connections that are
affected by the corresponding policy entry."
::= { slapmPolicyStatsEntry 6 }
slapmPolicyStatsFirstActivated OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The timestamp for when the corresponding policy entry
is activated. The value of this object serves as
the discontinuity event indicator when polling entries
in this table. The value of this object is updated on
transition of slapmPolicyStatsOperStatus into the active(2)
state."
DEFVAL { '0000000000000000'H }
::= { slapmPolicyStatsEntry 7 }
slapmPolicyStatsLastMapping OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The timestamp for when the last time
that the associated policy entry was used."
DEFVAL { '0000000000000000'H }
::= { slapmPolicyStatsEntry 8 }
slapmPolicyStatsInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of octets that was received by IP for an
entity that map to this entry."
::= { slapmPolicyStatsEntry 9 }
slapmPolicyStatsOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of octets that was transmitted by IP for an entity that map to this entry."
::= { slapmPolicyStatsEntry 10 }
slapmPolicyStatsConnectionLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The limit for the number of active TCP connections that
are allowed for this policy definition. A value of zero
for this object implies that a connection limit has not
been specified."
::= { slapmPolicyStatsEntry 11 }
slapmPolicyStatsCountAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This counter is incremented when a policy action's
Permission value is set to Accept and a session
(TCP connection) is accepted."
::= { slapmPolicyStatsEntry 12 }
slapmPolicyStatsCountDenies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This counter is incremented when a policy action's
Permission value is set to Deny and a session is denied,
or when a session (TCP connection) is rejected due to a
policy's connection limit (slapmPolicyStatsConnectLimit)
being reached."
::= { slapmPolicyStatsEntry 13 }
slapmPolicyStatsInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This counter counts the number of in octets discarded.
This occurs when an error is detected. Examples of this
are buffer overflow, checksum error, or bad packet
format."
::= { slapmPolicyStatsEntry 14 }
slapmPolicyStatsOutDiscards OBJECT-TYPE
slapmPolicyStatsOutDiscardsのOBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This counter counts the number of out octets discarded.
Examples of this are buffer overflow, checksum error, or
bad packet format."
::= { slapmPolicyStatsEntry 15 }
slapmPolicyStatsInPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This counter counts the number of in packets received
that relate to this policy entry from IP."
::= { slapmPolicyStatsEntry 16 }
slapmPolicyStatsOutPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This counter counts the number of out packets sent
by IP that relate to this policy entry."
::= { slapmPolicyStatsEntry 17 }
slapmPolicyStatsInProfileOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This counter counts the number of in octets that are
determined to be within profile."
::= { slapmPolicyStatsEntry 18 }
slapmPolicyStatsOutProfileOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This counter counts the number of out octets that are
determined to be within profile."
::= { slapmPolicyStatsEntry 19 }
slapmPolicyStatsMinRate OBJECT-TYPE SYNTAX Integer32 UNITS "Kilobits per second"
slapmPolicyStatsMinRateのOBJECT-TYPE構文Integer32ユニットは「キロビット毎秒」
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The minimum transfer rate defined for this entry."
::= { slapmPolicyStatsEntry 20 }
slapmPolicyStatsMaxRate OBJECT-TYPE
SYNTAX Integer32
UNITS "Kilobits per second"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum transfer rate defined for this entry."
::= { slapmPolicyStatsEntry 21 }
slapmPolicyStatsMaxDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum delay defined for this entry."
::= { slapmPolicyStatsEntry 22 }
-- SLA Performance Monitoring Policy Monitor Table
- SLAパフォーマンス監視ポリシーモニターの表
slapmPolicyMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF SlapmPolicyMonitorEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Provides a method of monitoring policies and their effect at a system.
SlapmPolicyMonitorEntry MAX-ACCESSステータス非難された説明OF slapmPolicyMonitorTable OBJECT-TYPE構文配列「システムでの政策とその効果をモニタリングする方法を提供します。
This table has been deprecated and replaced with
the slapmPRMonTable. Older implementations of
this MIB are expected to continue their support
of this table."
::= { slapmTableObjects 2 }
slapmPolicyMonitorEntry OBJECT-TYPE SYNTAX SlapmPolicyMonitorEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Defines an entry in the slapmPolicyMonitorTable. This table defines which policies should be monitored on a per policy traffic profile basis."
slapmPolicyMonitorEntryのOBJECT-TYPE SYNTAX SlapmPolicyMonitorEntry MAX-ACCESSステータス非難された説明は「slapmPolicyMonitorTableにエントリを定義します。このテーブルには、ポリシーは、ポリシーごとにトラフィックプロファイルごとに監視されるべきであるかを定義します。」
INDEX {
slapmPolicyMonitorOwnerIndex,
slapmPolicyMonitorSystemAddress,
slapmPolicyMonitorPolicyName,
slapmPolicyMonitorTrafficProfileName
}
::= { slapmPolicyMonitorTable 1 }
SlapmPolicyMonitorEntry ::=
SEQUENCE {
slapmPolicyMonitorOwnerIndex SnmpAdminString,
slapmPolicyMonitorSystemAddress OCTET STRING,
slapmPolicyMonitorPolicyName SlapmNameType,
slapmPolicyMonitorTrafficProfileName SlapmNameType,
slapmPolicyMonitorControl BITS,
slapmPolicyMonitorStatus SlapmStatus,
slapmPolicyMonitorInterval Integer32,
slapmPolicyMonitorIntTime DateAndTime,
slapmPolicyMonitorCurrentInRate Gauge32,
slapmPolicyMonitorCurrentOutRate Gauge32,
slapmPolicyMonitorMinRateLow Integer32,
slapmPolicyMonitorMinRateHigh Integer32,
slapmPolicyMonitorMaxRateHigh Integer32,
slapmPolicyMonitorMaxRateLow Integer32,
slapmPolicyMonitorMaxDelayHigh Integer32,
slapmPolicyMonitorMaxDelayLow Integer32,
slapmPolicyMonitorMinInRateNotAchieves Counter32,
slapmPolicyMonitorMaxInRateExceeds Counter32,
slapmPolicyMonitorMaxDelayExceeds Counter32,
slapmPolicyMonitorMinOutRateNotAchieves Counter32,
slapmPolicyMonitorMaxOutRateExceeds Counter32,
slapmPolicyMonitorCurrentDelayRate Gauge32,
slapmPolicyMonitorRowStatus RowStatus
}
slapmPolicyMonitorOwnerIndex OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..16)) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need to independently create or modify entries, the initial index is used as an 'owner index'. Such an initial index has a syntax of SnmpAdminString, and can thus be trivially mapped to a securityName or groupName as defined in VACM, in accordance with a security policy.
slapmPolicyMonitorOwnerIndex OBJECT-TYPE SYNTAXれるSnmpAdminString（SIZE（0..16））MAX-ACCESSステータスは非推奨のビューベースアクセス制御モデル（RFC 2575、VACM）を使用して、セキュリティ管理者がアクセス制御のプロビジョニングを容易にするために、DESCRIPTION」複数のユーザが独立にエントリを作成または変更する必要がある可能性のあるテーブルに対して、最初のインデックスは「所有者インデックス」として使用される。このような初期のインデックスはれるSnmpAdminStringの構文を有しており、定義されたよう従って自明のsecurityNameまたはグループ名にマッピングすることができますVACMで、セキュリティポリシーに従ってインチ
All entries in that table belonging to a particular user
will have the same value for this initial index. For a
given user's entries in a particular table, the object
identifiers for the information in these entries will
have the same subidentifiers (except for the 'column'
subidentifier) up to the end of the encoded owner index.
To configure VACM to permit access to this portion of the
table, one would create vacmViewTreeFamilyTable entries
with the value of vacmViewTreeFamilySubtree including the
owner index portion, and vacmViewTreeFamilyMask
'wildcarding' the column subidentifier. More elaborate
configurations are possible."
::= { slapmPolicyMonitorEntry 1 }
slapmPolicyMonitorSystemAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0 | 4 | 16))
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Address of a system that an Policy definition relates to.
A zero length octet string can be used to indicate that
only a single system is being represented.
Otherwise, the length of the octet string should be
4 for an ipv4 address and 16 for an ipv6 address."
::= { slapmPolicyMonitorEntry 2 }
slapmPolicyMonitorPolicyName OBJECT-TYPE
SYNTAX SlapmNameType
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Policy name that this entry relates to."
::= { slapmPolicyMonitorEntry 3 }
slapmPolicyMonitorTrafficProfileName OBJECT-TYPE
SYNTAX SlapmNameType
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The corresponding Traffic Profile name."
::= { slapmPolicyMonitorEntry 4 }
slapmPolicyMonitorControl OBJECT-TYPE SYNTAX BITS { monitorMinRate(0), monitorMaxRate(1), monitorMaxDelay(2), enableAggregateTraps(3), enableSubcomponentTraps(4), monitorSubcomponents(5) } MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The value of this object determines the type and level of monitoring that is applied to a policy/profile. The value of this object can't be changed once the table entry that it is a part of is activated via a slapmPolicyMonitorRowStatus transition to active state.
slapmPolicyMonitorControl OBJECT-TYPE構文BITS {monitorMinRate（0）、monitorMaxRate（1）、monitorMaxDelay（2）、enableAggregateTraps（3）、enableSubcomponentTraps（4）、monitorSubcomponents（5）} MAX-ACCESSリード作成ステータス非難された説明「の値をこのオブジェクトは、ポリシー/プロファイルに適用される監視のタイプおよびレベルを決定する。それの一部であることをテーブルエントリがアクティブ状態にslapmPolicyMonitorRowStatus転移を介して活性化されると、このオブジェクトの値を変更することはできません。
monitorMinRate(0) - Monitor minimum transfer rate.
monitorMaxRate(1) - Monitor maximum transfer rate.
monitorMaxDelay(2) - Monitor maximum delay.
enableAggregateTraps(3) - The enableAggregateTraps(3)
BITS setting enables notification generation
when monitoring a policy traffic profile as an
aggregate using the values in the corresponding
slapmPolicyStatsEntry. By default this function
is not enabled.
enableSubcomponentTraps(4) - This BITS setting enables
notification generation when monitoring all
subcomponents that are mapped to an corresponding
slapmPolicyStatsEntry. By default this
function is not enabled.
monitorSubcomponents(5) - This BITS setting enables
monitoring of each subcomponent (typically a
TCP connection or UDP listener) individually."
DEFVAL { { monitorMinRate, monitorMaxRate,
monitorMaxDelay } }
::= { slapmPolicyMonitorEntry 5 }
slapmPolicyMonitorStatus OBJECT-TYPE SYNTAX SlapmStatus MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The value of this object indicates when a monitored value has not meet a threshold or isn't meeting the defined service level. The SlapmStatus TEXTUAL-CONVENTION defines two levels of not meeting a threshold. The first set: slaMinInRateNotAchieved(0), slaMaxInRateExceeded(1), slaMaxDelayExceeded(2), slaMinOutRateNotAchieved(3), slaMaxOutRateExceeded(4)
slapmPolicyMonitorStatus OBJECT-TYPE構文SlapmStatus MAX-ACCESS read-onlyステータス非難された説明「このオブジェクトの値は、モニタ値が閾値を満たしていないか、定義されたサービスレベルを満たしていない場合を示している。SlapmStatusテキストの表記法は、2つのレベルを定義します閾値を満たさない最初のセット：slaMinInRateNotAchieved（0）、slaMaxInRateExceeded（1）、slaMaxDelayExceeded（2）、slaMinOutRateNotAchieved（3）、slaMaxOutRateExceeded（4）
are used to indicate when the SLA as an aggregate is
not meeting a threshold while the second set:
monitorMinInRateNotAchieved(5),
monitorMaxInRateExceeded(6),
monitorMaxDelayExceeded(7),
monitorMinOutRateNotAchieved(8),
monitorMaxOutRateExceeded(9)
indicate that at least one subcomponent is not meeting
a threshold."
::= { slapmPolicyMonitorEntry 6 }
slapmPolicyMonitorInterval OBJECT-TYPE
SYNTAX Integer32 (15..86400) -- 15 second min, 24 hour max
UNITS "seconds"
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The number of seconds that defines the sample period."
DEFVAL {20} -- 20 seconds
::= { slapmPolicyMonitorEntry 7 }
slapmPolicyMonitorIntTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The timestamp for when the last interval ended."
DEFVAL { '0000000000000000'H }
::= { slapmPolicyMonitorEntry 8 }
slapmPolicyMonitorCurrentInRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilobits per second"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Using the value of the corresponding
slapmPolicyMonitorInterval, slapmPolicyStatsInOctets
is sampled and then divided by slapmPolicyMonitorInterval
to determine the current in transfer rate."
::= { slapmPolicyMonitorEntry 9 }
slapmPolicyMonitorCurrentOutRate OBJECT-TYPE
slapmPolicyMonitorCurrentOutRateのOBJECT-TYPE
SYNTAX Gauge32
UNITS "kilobits per second"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Using the value of the corresponding
slapmPolicyMonitorInterval, slapmPolicyStatsOutOctets
is sampled and then divided by slapmPolicyMonitorInterval
to determine the current out transfer rate."
::= { slapmPolicyMonitorEntry 10 }
slapmPolicyMonitorMinRateLow OBJECT-TYPE SYNTAX Integer32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The threshold for generating a slapmMonitoredEventNotAchieved notification, signalling that a monitored minimum transfer rate has not been meet.
slapmPolicyMonitorMinRateLowのOBJECT-TYPE構文Integer32ユニットは、監視最小転送レートが満たすされていないことをシグナリング、MAX-ACCESSリード作成ステータス非難された説明「slapmMonitoredEventNotAchieved通知を生成するための閾値を「キロビット毎秒」。
A slapmMonitoredEventNotAchieved notification is not
generated again for an slapmPolicyMonitorEntry until
the minimum transfer rate
exceeds slapmPolicyMonitorMinRateHigh (a
slapmMonitoredEventOkay notification is then transmitted)
and then fails below slapmPolicyMonitorMinRateLow. This
behavior reduces the slapmMonitoredEventNotAchieved
notifications that are transmitted.
A value of zero for this object is returned when the slapmPolicyMonitorControl monitorMinRate(0) is not enabled. When enabled the default value for this object is the min rate value specified in the associated action definition minus 10%. If the action definition doesn't have a min rate defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMinRate(0) is selected.
slapmPolicyMonitorControl monitorMinRate（0）が有効になっていない場合、このオブジェクトのためのゼロの値が返されます。有効にすると、このオブジェクトのデフォルト値は、関連するアクション定義マイナス10％に指定された分のレート値です。アクション定義は、分率が定義されていない場合、このオブジェクトと値のデフォルトはありません前monitorMinRateが選択（0）されたときにこのエントリを起動するために指定する必要があります。
Note: The corresponding slapmPolicyMonitorControl
BITS setting, enableAggregateTraps(3), MUST be selected in
order for any notification relating to this entry to
potentially be generated."
::= { slapmPolicyMonitorEntry 11 }
slapmPolicyMonitorMinRateHigh OBJECT-TYPE SYNTAX Integer32
slapmPolicyMonitorMinRateHigh OBJECT-TYPE構文Integer32
UNITS "kilobits per second" MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The threshold for generating a slapmMonitoredEventOkay notification, signalling that a monitored minimum transfer rate has increased to an acceptable level.
ユニットはMAX-ACCESSリード作成ステータス非難された説明「監視最小転送レートが許容可能なレベルにまで増加していることを知らせる、slapmMonitoredEventOkay通知を生成するための閾値を「キロビット毎秒」。
A value of zero for this object is returned when the slapmPolicyMonitorControl monitorMinRate(0) is not enabled. When enabled the default value for this object is the min rate value specified in the associated action definition plus 10%. If the action definition doesn't have a min rate defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMinRate(0) is selected.
slapmPolicyMonitorControl monitorMinRate（0）が有効になっていない場合、このオブジェクトのためのゼロの値が返されます。有効にすると、このオブジェクトのデフォルト値は、関連するアクション定義+ 10％に指定された分のレート値です。アクション定義は、分率が定義されていない場合、このオブジェクトと値のデフォルトはありません前monitorMinRateが選択（0）されたときにこのエントリを起動するために指定する必要があります。
Note: The corresponding slapmPolicyMonitorControl
BITS setting, enableAggregateTraps(3), MUST be selected
in order for any notification relating to this entry to
potentially be generated."
::= { slapmPolicyMonitorEntry 12 }
slapmPolicyMonitorMaxRateHigh OBJECT-TYPE SYNTAX Integer32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The threshold for generating a slapmMonitoredEventNotAchieved notification, signalling that a monitored maximum transfer rate has been exceeded.
slapmPolicyMonitorMaxRateHigh OBJECT-TYPE構文Integer32のUNITS MAX-ACCESSはリード作成ステータス非難された説明「毎秒キロビット」「slapmMonitoredEventNotAchieved通知を生成するためのしきい値、監視最大転送レートを超えたことを知らせます。
A slapmMonitoredEventNotAchieved notification is not
generated again for an slapmPolicyMonitorEntry until the
maximum transfer rate fails below
slapmPolicyMonitorMaxRateLow (a slapmMonitoredEventOkay
notification is then transmitted) and then raises above
slapmPolicyMonitorMaxRateHigh. This behavior reduces the
slapmMonitoredEventNotAchieved notifications that are
transmitted.
A value of zero for this object is returned when the slapmPolicyMonitorControl monitorMaxRate(1) is not enabled. When enabled the default value for this object is the max rate value specified in the associated action definition plus 10%. If the action definition doesn't have a max rate defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMaxRate(1) is selected.
slapmPolicyMonitorControl monitorMaxRate（1）が有効でない場合、このオブジェクトのためのゼロの値が返されます。有効にすると、このオブジェクトのデフォルト値は、関連するアクション定義+ 10％に指定された最大レート値です。アクション定義は、最大レートが定義されていない場合、このオブジェクトと値のデフォルトはありません前monitorMaxRateは、（1）選択されたときにこのエントリを起動するために指定する必要があります。
Note: The corresponding slapmPolicyMonitorControl
BITS setting, enableAggregateTraps(3), MUST be selected in
order for any notification relating to this entry to
potentially be generated."
::= { slapmPolicyMonitorEntry 13 }
slapmPolicyMonitorMaxRateLow OBJECT-TYPE SYNTAX Integer32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The threshold for generating a slapmMonitoredEventOkay notification, signalling that a monitored maximum transfer rate has fallen to an acceptable level.
slapmPolicyMonitorMaxRateLowのOBJECT-TYPE構文Integer32のUNITS監視最大転送レートが許容可能なレベルまで低下したことを知らせる、MAX-ACCESSリード作成ステータス非難された説明「slapmMonitoredEventOkay通知を生成するための閾値「キロビット毎秒」。
A value of zero for this object is returned when the
slapmPolicyMonitorControl monitorMaxRate(1) is not
enabled. When enabled the default value for this object
is the max rate value specified in the associated
action definition minus 10%. If the action definition
doesn't have a max rate defined then there is no
default for this object and a value MUST be specified
prior to activating this entry when monitorMaxRate(1)
is selected.
Note: The corresponding slapmPolicyMonitorControl
BITS setting, enableAggregateTraps(3), MUST be selected in
order for any notification relating to this entry to
potentially be generated."
::= { slapmPolicyMonitorEntry 14 }
slapmPolicyMonitorMaxDelayHigh OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The threshold for generating a slapmMonitoredEventNotAchieved notification, signalling that a monitored maximum delay rate has been exceeded.
slapmPolicyMonitorMaxDelayHigh OBJECT-TYPE構文Integer32ユニット「ミリ秒」MAX-ACCESS読作成ステータス非難された説明「slapmMonitoredEventNotAchieved通知を生成するための閾値を、監視対象の最大遅延量を超えたことを知らせます。
A slapmMonitoredEventNotAchieved notification is not generated again for an slapmPolicyMonitorEntry until
the maximum delay rate falls below
slapmPolicyMonitorMaxDelayLow (a slapmMonitoredEventOkay
notification is then transmitted) and raises above
slapmPolicyMonitorMaxDelayHigh. This behavior reduces
the slapmMonitoredEventNotAchieved notifications that are
transmitted.
A value of zero for this object is returned when the slapmPolicyMonitorControl monitorMaxDelay(4) is not enabled. When enabled the default value for this object is the max delay value specified in the associated action definition plus 10%. If the action definition doesn't have a max delay defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMaxDelay(4) is selected.
slapmPolicyMonitorControl monitorMaxDelay（4）が有効でない場合、このオブジェクトのためのゼロの値が返されます。有効にすると、このオブジェクトのデフォルト値は、関連するアクション定義+ 10％に指定された最大遅延値です。アクション定義は、定義された最大遅延を持っていない場合、このオブジェクトと値のデフォルトはありません前monitorMaxDelayは（4）選択されたときにこのエントリを起動するために指定する必要があります。
Note: The corresponding slapmPolicyMonitorControl
BITS setting, enableAggregateTraps(3), MUST be selected
in order for any notification relating to this entry to
potentially be generated."
::= { slapmPolicyMonitorEntry 15 }
slapmPolicyMonitorMaxDelayLow OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The threshold for generating a slapmMonitoredEventOkay notification, signalling that a monitored maximum delay rate has fallen to an acceptable level.
slapmPolicyMonitorMaxDelayLow OBJECT-TYPE構文Integer32ユニット「ミリ秒」MAX-ACCESS読作成ステータス非難された説明を「slapmMonitoredEventOkay通知を生成するための閾値を、監視対象の最大遅延量が許容レベルまで低下したことを知らせます。
A value of zero for this object is returned when the
slapmPolicyMonitorControl monitorMaxDelay(4) is not
enabled. When enabled the default value for this object
is the max delay value specified in the associated
action definition minus 10%. If the action definition
doesn't have a max delay defined then there is no
default for this object and a value MUST be specified
prior to activating this entry when monitorMaxDelay(4)
is selected.
Note: The corresponding slapmPolicyMonitorControl BITS setting, enableAggregateTraps(3), MUST be selected in order for any notification relating to this entry to potentially be generated."
注：対応slapmPolicyMonitorControl BITS設定、enableAggregateTraps（3）は、潜在的に生成されるが、このエントリに関連する通知のために選択されなければなりません「。
::= { slapmPolicyMonitorEntry 16 }
slapmPolicyMonitorMinInRateNotAchieves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times that a minimum transfer in rate
was not achieved."
::= { slapmPolicyMonitorEntry 17 }
slapmPolicyMonitorMaxInRateExceeds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times that a maximum transfer in rate
was exceeded."
::= { slapmPolicyMonitorEntry 18 }
slapmPolicyMonitorMaxDelayExceeds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times that a maximum delay in rate
was exceeded."
::= { slapmPolicyMonitorEntry 19 }
slapmPolicyMonitorMinOutRateNotAchieves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times that a minimum transfer out rate
was not achieved."
::= { slapmPolicyMonitorEntry 20 }
slapmPolicyMonitorMaxOutRateExceeds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times that a maximum transfer out rate
was exceeded."
::= { slapmPolicyMonitorEntry 21 }
slapmPolicyMonitorCurrentDelayRate OBJECT-TYPE
slapmPolicyMonitorCurrentDelayRateのOBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The current delay rate for this entry. This is
calculated by taking the average of the TCP
round trip times for all associating
slapmSubcomponentTable entries within a interval."
::= { slapmPolicyMonitorEntry 22 }
slapmPolicyMonitorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object allows entries to be created and deleted in the slapmPolicyMonitorTable. An entry in this table is deleted by setting this object to destroy(6).
slapmPolicyMonitorRowStatus OBJECT-TYPE構文RowStatus MAX-ACCESSはリード作成ステータス非難された説明は「このオブジェクトエントリがslapmPolicyMonitorTableで作成され、削除されることを可能にする。この表のエントリは、（6）を破壊するためにこのオブジェクトを設定することによって削除されます。
Removal of a corresponding (same policy and traffic profile
names) slapmPolicyStatsEntry has the side effect of the
automatic deletion an entry in this table."
::= { slapmPolicyMonitorEntry 23 }
-- Subcomponent Table
- サブコンポーネント表
slapmSubcomponentTable OBJECT-TYPE SYNTAX SEQUENCE OF SlapmSubcomponentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table to provide information on the individually components that are mapped to a policy rule (or old traffic profile).
SlapmSubcomponentEntry MAX-ACCESSステータス現在の説明のslapmSubcomponentTable OBJECT-TYPE構文配列は、「ポリシールール（または古いトラフィックプロファイル）にマップされている個別のコンポーネントに関する情報を提供するために、テーブルを定義します。
The indexing for this table is designed to support
the use of an SNMP GET-NEXT operation using only
the remote address and remote port as a way for
a management station to retrieve the table entries
relating to a particular client."
::= { slapmTableObjects 3 }
slapmSubcomponentEntry OBJECT-TYPE SYNTAX SlapmSubcomponentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION
slapmSubcomponentEntryのOBJECT-TYPE SYNTAX SlapmSubcomponentEntry MAX-ACCESSステータス現在の説明
"Describes a particular subcomponent entry. This
table does not have an OwnerIndex as
part of its indexing since this table's contents
is intended to span multiple users."
INDEX {
slapmSubcomponentRemAddress,
slapmSubcomponentRemPort,
slapmSubcomponentLocalAddress,
slapmSubcomponentLocalPort
}
::= { slapmSubcomponentTable 1 }
SlapmSubcomponentEntry ::=
SEQUENCE {
slapmSubcomponentRemAddress OCTET STRING,
slapmSubcomponentRemPort Integer32,
slapmSubcomponentLocalAddress OCTET STRING,
slapmSubcomponentLocalPort Integer32,
slapmSubcomponentProtocol INTEGER,
slapmSubcomponentSystemAddress OCTET STRING,
slapmSubcomponentPolicyName SlapmNameType,
slapmSubcomponentTrafficProfileName SlapmNameType,
slapmSubcomponentLastActivity DateAndTime,
slapmSubcomponentInOctets Counter32,
slapmSubcomponentOutOctets Counter32,
slapmSubcomponentTcpOutBufferedOctets Counter32,
slapmSubcomponentTcpInBufferedOctets Counter32,
slapmSubcomponentTcpReXmts Counter32,
slapmSubcomponentTcpRoundTripTime Integer32,
slapmSubcomponentTcpRoundTripVariance Integer32,
slapmSubcomponentInPdus Counter32,
slapmSubcomponentOutPdus Counter32,
slapmSubcomponentApplName SnmpAdminString,
slapmSubcomponentMonitorStatus SlapmStatus,
slapmSubcomponentMonitorIntTime DateAndTime,
slapmSubcomponentMonitorCurrentInRate Gauge32,
slapmSubcomponentMonitorCurrentOutRate Gauge32,
slapmSubcomponentPolicyRuleIndex Unsigned32
}
slapmSubcomponentRemAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0 | 4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicate the remote address of a subcomponent.
A remote address can be either an ipv4 address in which
case 4 octets are required or as an ipv6 address that requires 16 octets. The value of this subidentifier
is a zero length octet string when this entry relates
to a UDP listener."
::= { slapmSubcomponentEntry 1 }
slapmSubcomponentRemPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicate the remote port of a subcomponent.
The value of this subidentifier
is 0 when this entry relates to a UDP listener."
::= { slapmSubcomponentEntry 2 }
slapmSubcomponentLocalAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicate the local address of a subcomponent.
A local address can be either an ipv4 address in which
case 4 octets are required or as an ipv6 address that
requires 16 octets."
::= { slapmSubcomponentEntry 3 }
slapmSubcomponentLocalPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible
slapmSubcomponentLocalPortのOBJECT-TYPE構文Integer32（0 65535）MAX-ACCESSアクセス不可能
STATUS current
DESCRIPTION
"Indicate the local port of a subcomponent."
::= { slapmSubcomponentEntry 4 }
slapmSubcomponentProtocol OBJECT-TYPE
SYNTAX INTEGER {
udpListener(1),
tcpConnection(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the protocol in use that identifies the
type of subcomponent."
::= { slapmSubcomponentEntry 5 }
slapmSubcomponentSystemAddress OBJECT-TYPE
slapmSubcomponentSystemAddressのOBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0 | 4 | 16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Address of a system that an Policy definition relates to.
A zero length octet string can be used to indicate that
only a single system is being represented.
Otherwise, the length of the octet string should be
4 for an ipv4 address and 16 for an ipv6 address."
::= { slapmSubcomponentEntry 6 }
slapmSubcomponentPolicyName OBJECT-TYPE SYNTAX SlapmNameType MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Policy name that this entry relates to.
このエントリはに関連していることをslapmSubcomponentPolicyNameのOBJECT-TYPE SYNTAX SlapmNameType MAX-ACCESS read-onlyステータス非難された説明「ポリシー名。
This object, along with slapmSubcomponentTrafficProfileName,
have been replaced with the use of an unsigned integer
index that is mapped to an slapmPolicyNameEntry to actually
identify policy naming."
::= { slapmSubcomponentEntry 7 }
slapmSubcomponentTrafficProfileName OBJECT-TYPE SYNTAX SlapmNameType MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The corresponding traffic profile name.
slapmSubcomponentTrafficProfileNameのOBJECT-TYPE SYNTAX SlapmNameType MAX-ACCESS read-onlyステータス非難された説明「対応するトラフィックプロファイル名。
This object, along with slapmSubcomponentProfileName,
have been replaced with the use of an unsigned integer
index that is mapped to an slapmPolicyNameEntry to
actually identify policy naming."
::= { slapmSubcomponentEntry 8 }
slapmSubcomponentLastActivity OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and timestamp of when this entry was last used."
DEFVAL { '0000000000000000'H }
::= { slapmSubcomponentEntry 9 }
slapmSubcomponentInOctets OBJECT-TYPE SYNTAX Counter32
slapmSubcomponentInOctetsのOBJECT-TYPE SYNTAXカウンタ
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received from IP for this
connection."
::= { slapmSubcomponentEntry 10 }
slapmSubcomponentOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets sent to IP for this connection."
::= { slapmSubcomponentEntry 11 }
slapmSubcomponentTcpOutBufferedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of outgoing octets buffered. The value
of this object is zero when the entry is not
for a TCP connection."
::= { slapmSubcomponentEntry 12 }
slapmSubcomponentTcpInBufferedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of incoming octets buffered. The value
of this object is zero when the entry is not
for a TCP connection."
::= { slapmSubcomponentEntry 13 }
slapmSubcomponentTcpReXmts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of retransmissions. The value
of this object is zero when the entry is not
for a TCP connection."
::= { slapmSubcomponentEntry 14 }
slapmSubcomponentTcpRoundTripTime OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds"
slapmSubcomponentTcpRoundTripTimeのOBJECT-TYPE構文Integer32のUNITS "ミリ秒"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time that has elapsed, measured in
milliseconds, from when the last TCP segment was
transmitted by the TCP Stack until the ACK was
received.
The value of this object is zero when the entry is not
for a TCP connection."
::= { slapmSubcomponentEntry 15 }
slapmSubcomponentTcpRoundTripVariance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Round trip time variance.
slapmSubcomponentTcpRoundTripVarianceのOBJECT-TYPE構文Integer32 MAX-ACCESS read-onlyステータス現在の説明「ラウンドトリップ時間の変動。
The value of this object is zero when the entry is not
for a TCP connection."
::= { slapmSubcomponentEntry 16 }
slapmSubcomponentInPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of protocol related data units transferred inbound:
slapmSubcomponentInPdusのOBJECT-TYPE SYNTAXカウンタACCESS read-only説明「インバウンド転送プロトコルに関連するデータ単位の数：
slapmSubcomponentProtocol PDU Type
slapmSubcomponentProtocol PDUタイプ
udpListener(1) UDP datagrams
tcpConnection(2) TCP segments"
::= { slapmSubcomponentEntry 17 }
slapmSubcomponentOutPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of protocol related data units transferred outbound:
slapmSubcomponentOutPdusのOBJECT-TYPE SYNTAXカウンタACCESS read-only説明「アウトバウンド転送プロトコルに関連するデータ単位の数：
slapmSubcomponentProtocol PDU Type
slapmSubcomponentProtocol PDUタイプ
udpListener(1) UDP datagrams tcpConnection(2) TCP segments"
::= { slapmSubcomponentEntry 18 }
slapmSubcomponentApplName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The application name associated with this entry if known,
otherwise a zero-length octet string is returned as the
value of this object."
::= { slapmSubcomponentEntry 19 }
slapmSubcomponentMonitorStatus OBJECT-TYPE SYNTAX SlapmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates when a monitored value has exceeded a threshold or isn't meeting the defined service level. Only the following SlapmStatus BITS setting can be reported here:
slapmSubcomponentMonitorStatusのOBJECT-TYPE SYNTAX SlapmStatus MAX-ACCESS read-onlyステータス現在の説明は「このオブジェクトの値は、モニタ値がしきい値を超えているか、定義されたサービスレベルを満たしていないときを示している。ここに報告することができます設定のみ次SlapmStatusのBITSを：
monitorMinInRateNotAchieved(5),
monitorMaxInRateExceeded(6),
monitorMaxDelayExceeded(7),
monitorMinOutRateNotAchieved(8),
monitorMaxOutRateExceeded(9)
This object only has meaning when an corresponding
slapmPolicyMonitorEntry exists with the
slapmPolicyMonitorControl BITS setting
monitorSubcomponents(5) enabled."
::= { slapmSubcomponentEntry 20 }
slapmSubcomponentMonitorIntTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp for when the last interval ended.
slapmSubcomponentMonitorIntTimeのOBJECT-TYPE SYNTAXのDateAndTime MAX-ACCESS read-onlyステータス現在の説明「最後の間隔が終了したときのタイムスタンプ。
This object only has meaning when an corresponding
slapmPRMonEntry (or old slapmPolicyMonitorEntry)
exists with the slapmPRMonControl (or
slapmPolicyMonitorControl) BITS setting
monitorSubcomponents(5) enabled. All of the
octets returned when monitoring is not in effect must be zero."
DEFVAL { '0000000000000000'H }
::= { slapmSubcomponentEntry 21 }
slapmSubcomponentMonitorCurrentInRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Using the value of the corresponding slapmPRMonInterval (or slapmPolicyMonitorInterval), slapmSubcomponentStatsInOctets is divided by slapmSubcomponentMonitorInterval to determine the current in transfer rate.
slapmSubcomponentMonitorCurrentInRate OBJECT-TYPE構文Gauge32のUNITS対応slapmPRMonInterval（又はslapmPolicyMonitorInterval）の値を使用してMAX-ACCESS read-only説明」「毎秒キロビットの」、slapmSubcomponentStatsInOctetsは、転送レートの電流を決定するためにslapmSubcomponentMonitorIntervalによって分割されます。
This object only has meaning when an corresponding
slapmPRMonEntry (or slapmPolicyMonitorEntry)
exists with the slapmPRMonControl (or
slapmPolicyMonitorControl) BITS setting
monitorSubcomponents(5) enabled. The value of this
object is zero when monitoring is not in effect."
::= { slapmSubcomponentEntry 22 }
slapmSubcomponentMonitorCurrentOutRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Using the value of the corresponding slapmPRMonInterval (or slapmPolicyMonitorInterva)l, slapmSubcomponentStatsOutOctets is divided by slapmPRMonInterval (or slapmPolicyMonitorInterval) to determine the current out transfer rate.
slapmSubcomponentMonitorCurrentOutRate OBJECT-TYPE構文Gauge32ユニットが対応slapmPRMonInterval（又はslapmPolicyMonitorInterva）の値を使用してMAX-ACCESS read-only説明」L「キロビット毎秒」、slapmSubcomponentStatsOutOctetsはslapmPRMonInterval（又はslapmPolicyMonitorInterval）によって分割される電流を決定するための転送割合。
This object only has meaning when an corresponding
slapmPRMonEntry (or slapmPolicyMonitorEntry) exists with
the slapmPRMonControl (or slapmPolicyMonitorControl)
BITS setting monitorSubcomponents(5) enabled. The value
of this object is zero when monitoring is not in effect."
::= { slapmSubcomponentEntry 23 }
slapmSubcomponentPolicyRuleIndex OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION
slapmSubcomponentPolicyRuleIndexのOBJECT-TYPE構文Unsigned32（0 4294967295）MAX-ACCESS read-only説明
"Points to an slapmPolicyNameEntry when combined with
slapmSubcomponentSystemAddress to indicate the
policy naming that relates to this entry.
A value of 0 for this object MUST be returned when
the corresponding slapmSubcomponentEntry has no
policy rule associated with it."
::= { slapmSubcomponentEntry 24 }
-- Table that maps an unsigned integer index to whatever -- names a policy rule.
- 名前ポリシールール - 何に符号なし整数インデックスをマッピングするテーブル。
slapmPolicyNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlapmPolicyNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides the mapping between a policy index as a
unsigned 32 bit integer and the unique name associated
with a policy rule."
::= { slapmTableObjects 4 }
slapmPolicyNameEntry OBJECT-TYPE
SYNTAX SlapmPolicyNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the slapmPolicyNameTable."
INDEX {
slapmPolicyNameSystemAddress,
slapmPolicyNameIndex
}
::= { slapmPolicyNameTable 1 }
SlapmPolicyNameEntry ::=
SEQUENCE {
slapmPolicyNameSystemAddress OCTET STRING,
slapmPolicyNameIndex Unsigned32,
slapmPolicyNameOfRule SlapmPolicyRuleName
}
slapmPolicyNameSystemAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0 | 4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Address of a system that an Policy rule definition relates
to. A zero length octet string must be used to indicate that only a single system is being represented.
Otherwise, the length of the octet string must be
4 for an ipv4 address or 16 for an ipv6 address."
::= { slapmPolicyNameEntry 1 }
slapmPolicyNameIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A locally arbitrary, but unique identifier associated
with this table entry. This value is not expected to
remain constant across reIPLs."
::= { slapmPolicyNameEntry 2 }
slapmPolicyNameOfRule OBJECT-TYPE
SYNTAX SlapmPolicyRuleName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique name that identifies a policy rule definition."
::= { slapmPolicyNameEntry 3 }
-- Sla Performance Monitoring Policy Rule Statistics Table
- SLAパフォーマンス監視ポリシールールの統計表
slapmPolicyRuleStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlapmPolicyRuleStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides statistics on a per system and a per policy
rule basis."
::= { slapmTableObjects 5 }
slapmPolicyRuleStatsEntry OBJECT-TYPE SYNTAX SlapmPolicyRuleStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the slapmPolicyRuleStatsTable. This table defines a set of statistics that is kept on a per system and per policy rule basis.
slapmPolicyRuleStatsEntryのOBJECT-TYPE SYNTAX SlapmPolicyRuleStatsEntry MAX-ACCESSステータス現在の説明は「slapmPolicyRuleStatsTableのエントリが。この表は、システムごとに、ポリシールールごとに保たれている統計情報のセットを定義定義します。
Entries in this table are not created or deleted via SNMP
but reflect the set of policy rule definitions known
at a system."
INDEX {
slapmPolicyNameSystemAddress, slapmPolicyNameIndex
}
::= { slapmPolicyRuleStatsTable 1 }
SlapmPolicyRuleStatsEntry ::=
SEQUENCE {
slapmPolicyRuleStatsOperStatus INTEGER,
slapmPolicyRuleStatsActiveConns Gauge32,
slapmPolicyRuleStatsTotalConns Counter32,
slapmPolicyRuleStatsLActivated DateAndTime,
slapmPolicyRuleStatsLastMapping DateAndTime,
slapmPolicyRuleStatsInOctets Counter32,
slapmPolicyRuleStatsOutOctets Counter32,
slapmPolicyRuleStatsConnLimit Unsigned32,
slapmPolicyRuleStatsCountAccepts Counter32,
slapmPolicyRuleStatsCountDenies Counter32,
slapmPolicyRuleStatsInDiscards Counter32,
slapmPolicyRuleStatsOutDiscards Counter32,
slapmPolicyRuleStatsInPackets Counter32,
slapmPolicyRuleStatsOutPackets Counter32,
slapmPolicyRuleStatsInProOctets Counter32,
slapmPolicyRuleStatsOutProOctets Counter32,
slapmPolicyRuleStatsMinRate Unsigned32,
slapmPolicyRuleStatsMaxRate Unsigned32,
slapmPolicyRuleStatsMaxDelay Unsigned32,
slapmPolicyRuleStatsTotalRsvpFlows Counter32,
slapmPolicyRuleStatsActRsvpFlows Gauge32
}
slapmPolicyRuleStatsOperStatus OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2), deleteNeeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of a policy entry:
slapmPolicyRuleStatsOperStatusのOBJECT-TYPE SYNTAX INTEGER {非アクティブ（1）、アクティブ（2）、deleteNeeded（3）} MAX-ACCESS read-only説明「ポリシーエントリの状態：
inactive(1) - An policy entry was either defined
by local system definition or
discovered via
a directory search but has not been
activated (not currently being used).
active(2) - Policy entry is being used to affect
traffic flows.
deleteNeeded(3) - Either though local implementation
dependent methods or by discovering
that the directory entry corresponding
to this table entry no longer
exists and slapmPolicyPurgeTime needs
to expire before attempting to remove
the corresponding slapmPolicyStatsEntry
and any dependent slapmPolicyMonitor
table entries.
Note: a policy rule in a state other than
active(2) is not being used to affect traffic flows."
::= { slapmPolicyRuleStatsEntry 1 }
slapmPolicyRuleStatsActiveConns OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active TCP connections that are
affected by the corresponding policy entry."
::= { slapmPolicyRuleStatsEntry 2 }
slapmPolicyRuleStatsTotalConns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of total TCP connections that are
affected by the corresponding policy entry."
::= { slapmPolicyRuleStatsEntry 3 }
slapmPolicyRuleStatsLActivated OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp for when the corresponding policy entry
was last activated. The value of this object serves as
the discontinuity event indicator when polling entries
in this table. The value of this object is updated on
transition of slapmPolicyRuleStatsOperStatus into the
active(2) state."
DEFVAL { '0000000000000000'H }
::= { slapmPolicyRuleStatsEntry 4 }
slapmPolicyRuleStatsLastMapping OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current
slapmPolicyRuleStatsLastMapping OBJECT-TYPE SYNTAXのDateAndTime MAX-ACCESS read-onlyステータス電流
DESCRIPTION
"The timestamp for when the last time
that the associated policy entry was used."
DEFVAL { '0000000000000000'H }
::= { slapmPolicyRuleStatsEntry 5 }
slapmPolicyRuleStatsInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that was received by IP for an
entity that map to this entry."
::= { slapmPolicyRuleStatsEntry 6 }
slapmPolicyRuleStatsOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that was transmitted by IP for an
entity that map to this entry."
::= { slapmPolicyRuleStatsEntry 7 }
slapmPolicyRuleStatsConnLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The limit for the number of active TCP connections that
are allowed for this policy definition. A value of zero
for this object implies that a connection limit has not
been specified."
::= { slapmPolicyRuleStatsEntry 8 }
slapmPolicyRuleStatsCountAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a policy action's
Permission value is set to Accept and a session
(TCP connection) is accepted."
::= { slapmPolicyRuleStatsEntry 9 }
slapmPolicyRuleStatsCountDenies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only
slapmPolicyRuleStatsCountDeniesのOBJECT-TYPE SYNTAXカウンタACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a policy action's
Permission value is set to Deny and a session is denied,
or when a session (TCP connection) is rejected due to a
policy's connection limit (slapmPolicyRuleStatsConnectLimit)
being reached."
::= { slapmPolicyRuleStatsEntry 10 }
slapmPolicyRuleStatsInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter counts the number of in octets discarded.
This occurs when an error is detected. Examples of this
are buffer overflow, checksum error, or bad packet
format."
::= { slapmPolicyRuleStatsEntry 11 }
slapmPolicyRuleStatsOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter counts the number of out octets discarded.
Examples of this are buffer overflow, checksum error, or
bad packet format."
::= { slapmPolicyRuleStatsEntry 12 }
slapmPolicyRuleStatsInPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter counts the number of in packets received
that relate to this policy entry from IP."
::= { slapmPolicyRuleStatsEntry 13 }
slapmPolicyRuleStatsOutPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter counts the number of out packets sent
by IP that relate to this policy entry."
::= { slapmPolicyRuleStatsEntry 14 }
slapmPolicyRuleStatsInProOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter counts the number of in octets that are
determined to be within profile."
::= { slapmPolicyRuleStatsEntry 15 }
slapmPolicyRuleStatsOutProOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter counts the number of out octets that are
determined to be within profile."
::= { slapmPolicyRuleStatsEntry 16 }
slapmPolicyRuleStatsMinRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Kilobits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum transfer rate defined for this entry."
::= { slapmPolicyRuleStatsEntry 17 }
slapmPolicyRuleStatsMaxRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Kilobits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum transfer rate defined for this entry."
::= { slapmPolicyRuleStatsEntry 18 }
slapmPolicyRuleStatsMaxDelay OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum delay defined for this entry."
::= { slapmPolicyRuleStatsEntry 19 }
slapmPolicyRuleStatsTotalRsvpFlows OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only
slapmPolicyRuleStatsTotalRsvpFlowsのOBJECT-TYPE SYNTAXカウンタACCESS read-only
STATUS current
DESCRIPTION
"Total number of RSVP flows that have be activated."
::= { slapmPolicyRuleStatsEntry 20 }
slapmPolicyRuleStatsActRsvpFlows OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of active RSVP flows."
::= { slapmPolicyRuleStatsEntry 21 }
-- SLA Performance Monitoring Policy Rule Monitor Table
- SLAパフォーマンス監視ポリシールールのモニタ表
slapmPRMonTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlapmPRMonEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides a method of monitoring policies and their
effect at a system."
::= { slapmTableObjects 6 }
slapmPRMonEntry OBJECT-TYPE SYNTAX SlapmPRMonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the slapmPRMonTable. This table defines which policies should be monitored on a per policy rule basis.
slapmPRMonEntryのOBJECT-TYPE SYNTAX SlapmPRMonEntry MAX-ACCESSステータス現在の説明は「slapmPRMonTableにエントリを定義します。このテーブルには、ポリシールールごとに監視する必要がありますどのポリシーを定義します。
An attempt to set any read-create object defined within an
slapmPRMonEntry while the value of slapmPRMonRowStatus is
active(1) will result in an inconsistentValue error."
INDEX {
slapmPRMonOwnerIndex,
slapmPRMonSystemAddress,
slapmPRMonIndex
}
::= { slapmPRMonTable 1 }
SlapmPRMonEntry ::=
SEQUENCE {
slapmPRMonOwnerIndex SnmpAdminString,
slapmPRMonSystemAddress OCTET STRING,
slapmPRMonIndex Unsigned32, slapmPRMonControl BITS,
slapmPRMonStatus SlapmStatus,
slapmPRMonInterval Unsigned32,
slapmPRMonIntTime DateAndTime,
slapmPRMonCurrentInRate Gauge32,
slapmPRMonCurrentOutRate Gauge32,
slapmPRMonMinRateLow Unsigned32,
slapmPRMonMinRateHigh Unsigned32,
slapmPRMonMaxRateHigh Unsigned32,
slapmPRMonMaxRateLow Unsigned32,
slapmPRMonMaxDelayHigh Unsigned32,
slapmPRMonMaxDelayLow Unsigned32,
slapmPRMonMinInRateNotAchieves Counter32,
slapmPRMonMaxInRateExceeds Counter32,
slapmPRMonMaxDelayExceeds Counter32,
slapmPRMonMinOutRateNotAchieves Counter32,
slapmPRMonMaxOutRateExceeds Counter32,
slapmPRMonCurrentDelayRate Gauge32,
slapmPRMonRowStatus RowStatus
}
slapmPRMonOwnerIndex OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need to independently create or modify entries, the initial index is used as an 'owner index'. Such an initial index has a syntax of SnmpAdminString, and can thus be trivially mapped to a securityName or groupName as defined in VACM, in accordance with a security policy.
slapmPRMonOwnerIndexのOBJECT-TYPE SYNTAXれるSnmpAdminString（SIZE（0..16））ビューベースアクセス制御モデル（RFC 2575、VACM）を使用して、セキュリティ管理者がアクセス制御のプロビジョニングを容易にするために、MAX-ACCESSステータス現在の説明は」複数のユーザが独立にエントリを作成または変更する必要がある可能性のあるテーブルに対して、最初のインデックスは「所有者インデックス」として使用される。このような初期のインデックスはれるSnmpAdminStringの構文を有しており、定義されたよう従って自明のsecurityNameまたはグループ名にマッピングすることができますVACMで、セキュリティポリシーに従ってインチ
All entries in that table belonging to a particular user
will have the same value for this initial index. For a
given user's entries in a particular table, the object
identifiers for the information in these entries will
have the same subidentifiers (except for the 'column'
subidentifier) up to the end of the encoded owner index.
To configure VACM to permit access to this portion of the
table, one would create vacmViewTreeFamilyTable entries
with the value of vacmViewTreeFamilySubtree including the
owner index portion, and vacmViewTreeFamilyMask
'wildcarding' the column subidentifier. More elaborate
configurations are possible."
::= { slapmPRMonEntry 1 }
slapmPRMonSystemAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0 | 4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Address of a system that an Policy definition relates to.
A zero length octet string can be used to indicate that
only a single system is being represented.
Otherwise, the length of the octet string should be
4 for an ipv4 address and 16 for an ipv6 address."
::= { slapmPRMonEntry 2 }
slapmPRMonIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An slapmPolicyNameTable index, slapmPolicyNameIndex,
that points to the unique name associated with a
policy rule definition."
::= { slapmPRMonEntry 3 }
slapmPRMonControl OBJECT-TYPE SYNTAX BITS { monitorMinRate(0), monitorMaxRate(1), monitorMaxDelay(2), enableAggregateTraps(3), enableSubcomponentTraps(4), monitorSubcomponents(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object determines the type and level of monitoring that is applied to a policy rule. The value of this object can't be changed once the table entry that it is a part of is activated via a slapmPRMonRowStatus transition to active state.
slapmPRMonControlのOBJECT-TYPE構文BITS {monitorMinRate（0）、monitorMaxRate（1）、monitorMaxDelay（2）、enableAggregateTraps（3）、enableSubcomponentTraps（4）、monitorSubcomponents（5）} MAX-ACCESSはリード作成ステータス現在の説明「の値このオブジェクトは、ポリシールールに適用される監視のタイプおよびレベルを決定する。それの一部であることをテーブルエントリがアクティブ状態にslapmPRMonRowStatus転移を介して活性化されると、このオブジェクトの値を変更することはできません。
monitorMinRate(0) - Monitor minimum transfer rate.
monitorMaxRate(1) - Monitor maximum transfer rate.
monitorMaxDelay(2) - Monitor maximum delay.
enableAggregateTraps(3) - The enableAggregateTraps(3)
BITS setting enables notification generation
when monitoring a policy rule as an aggregate using the values in the corresponding
slapmPRMonStatsEntry. By default this function
is not enabled.
enableSubcomponentTraps(4) - This BITS setting enables
notification generation when monitoring all
subcomponents that are mapped to an corresponding
slapmPRMonStatsEntry. By default this
function is not enabled.
monitorSubcomponents(5) - This BITS setting enables
monitoring of each subcomponent (typically a
TCP connection or UDP listener) individually."
DEFVAL { { monitorMinRate, monitorMaxRate,
monitorMaxDelay } }
::= { slapmPRMonEntry 4 }
slapmPRMonStatus OBJECT-TYPE SYNTAX SlapmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates when a monitored value has not meet a threshold or isn't meeting the defined service level. The SlapmStatus TEXTUAL-CONVENTION defines two levels of not meeting a threshold. The first set: slaMinInRateNotAchieved(0), slaMaxInRateExceeded(1), slaMaxDelayExceeded(2), slaMinOutRateNotAchieved(3), slaMaxOutRateExceeded(4)
slapmPRMonStatus OBJECT-TYPE構文SlapmStatus MAX-ACCESS read-only説明は「このオブジェクトの値は、モニタ値が閾値を満たしていないか、定義されたサービスレベルを満たしていない場合を示している。SlapmStatusテキストの表記法は、2つのレベルを定義します閾値を満たさない最初のセット：slaMinInRateNotAchieved（0）、slaMaxInRateExceeded（1）、slaMaxDelayExceeded（2）、slaMinOutRateNotAchieved（3）、slaMaxOutRateExceeded（4）
are used to indicate when the SLA as an aggregate is
not meeting a threshold while the second set:
monitorMinInRateNotAchieved(5),
monitorMaxInRateExceeded(6),
monitorMaxDelayExceeded(7),
monitorMinOutRateNotAchieved(8),
monitorMaxOutRateExceeded(9)
indicate that at least one subcomponent is not meeting
a threshold."
::= { slapmPRMonEntry 5 }
slapmPRMonInterval OBJECT-TYPE SYNTAX Unsigned32 (15..86400) -- 15 second min, 24 hour max UNITS "seconds" MAX-ACCESS read-create
slapmPRMonInterval OBJECT-TYPE構文Unsigned32（15..86400） - 15秒分、24時間の最大単位 "秒" MAX-ACCESSはリード作成
STATUS current
DESCRIPTION
"The number of seconds that defines the sample period."
DEFVAL {20} -- 20 seconds
::= { slapmPRMonEntry 6 }
slapmPRMonIntTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp for when the last interval ended."
DEFVAL { '0000000000000000'H }
::= { slapmPRMonEntry 7 }
slapmPRMonCurrentInRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilobits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Using the value of the corresponding
slapmPRMonInterval, slapmPolicyRuleStatsInOctets
is sampled and then divided by slapmPRMonInterval
to determine the current in transfer rate."
::= { slapmPRMonEntry 8 }
slapmPRMonCurrentOutRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilobits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Using the value of the corresponding
slapmPolicyMonInterval, slapmPolicyRuleStatsOutOctets
is sampled and then divided by slapmPRMonInterval
to determine the current out transfer rate."
::= { slapmPRMonEntry 9 }
slapmPRMonMinRateLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for generating a slapmPolicyRuleMonNotOkay notification, signalling that a monitored minimum transfer rate has not been meet.
slapmPRMonMinRateLowのOBJECT-TYPE構文Unsigned32ユニットは、監視最小転送レートが満たすされていないことをシグナリング、MAX-ACCESSはリード作成ステータス現在の説明「slapmPolicyRuleMonNotOkay通知を生成するための閾値「キロビット毎秒」。
A slapmPolicyRuleMonNotOkay notification is not
generated again for an slapmPRMonEntry until
the minimum transfer rate
exceeds slapmPRMonMinRateHigh (a
slapmPolicyRuleMonOkay notification is then transmitted)
and then fails below slapmPRMonMinRateLow. This
behavior reduces the slapmPolicyRuleMonNotOkay
notifications that are transmitted.
A value of zero for this object is returned when the slapmPRMonControl monitorMinRate(0) is not enabled. When enabled the default value for this object is the min rate value specified in the associated action definition minus 10%. If the action definition doesn't have a min rate defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMinRate(0) is selected.
slapmPRMonControl monitorMinRate（0）が有効になっていない場合、このオブジェクトのためのゼロの値が返されます。有効にすると、このオブジェクトのデフォルト値は、関連するアクション定義マイナス10％に指定された分のレート値です。アクション定義は、分率が定義されていない場合、このオブジェクトと値のデフォルトはありません前monitorMinRateが選択（0）されたときにこのエントリを起動するために指定する必要があります。
Note: The corresponding slapmPRMonControl
BITS setting, enableAggregateTraps(3), MUST be selected in
order for any notification relating to this entry to
potentially be generated."
::= { slapmPRMonEntry 10 }
slapmPRMonMinRateHigh OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for generating a slapmPolicyRuleMonOkay notification, signalling that a monitored minimum transfer rate has increased to an acceptable level.
slapmPRMonMinRateHigh OBJECT-TYPEの構文Unsigned32のUNITS MAX-ACCESSはリード作成ステータス現在の説明「「毎秒キロビットの」slapmPolicyRuleMonOkay通知を生成するためのしきい値、監視最小転送レートが許容可能なレベルにまで増加していることを知らせます。
A value of zero for this object is returned when the
slapmPRMonControl monitorMinRate(0) is not
enabled. When enabled the default value for this object
is the min rate value specified in the associated
action definition plus 10%. If the action definition
doesn't have a min rate defined then there is no
default for this object and a value MUST be specified
prior to activating this entry when monitorMinRate(0)
is selected.
Note: The corresponding slapmPRMonControl
BITS setting, enableAggregateTraps(3), MUST be selected
in order for any notification relating to this entry to potentially be generated."
::= { slapmPRMonEntry 11 }
slapmPRMonMaxRateHigh OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for generating a slapmPolicyRuleMonNotOkay notification, signalling that a monitored maximum transfer rate has been exceeded.
slapmPRMonMaxRateHigh OBJECT-TYPEの構文Unsigned32のUNITS MAX-ACCESSリード作成ステータス現在の説明「slapmPolicyRuleMonNotOkay通知を生成するための閾値「毎秒キロビット」を、監視最大転送レートを超えたことを知らせます。
A slapmPolicyRuleNotOkay notification is not
generated again for an slapmPRMonEntry until the
maximum transfer rate fails below
slapmPRMonMaxRateLow (a slapmPolicyRuleMonOkay
notification is then transmitted) and then raises above
slapmPRMonMaxRateHigh. This behavior reduces the
slapmPolicyRuleMonNotOkay notifications that are
transmitted.
A value of zero for this object is returned when the slapmPRMonControl monitorMaxRate(1) is not enabled. When enabled the default value for this object is the max rate value specified in the associated action definition plus 10%. If the action definition doesn't have a max rate defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMaxRate(1) is selected.
slapmPRMonControl monitorMaxRate（1）が有効でない場合、このオブジェクトのためのゼロの値が返されます。有効にすると、このオブジェクトのデフォルト値は、関連するアクション定義+ 10％に指定された最大レート値です。アクション定義は、最大レートが定義されていない場合、このオブジェクトと値のデフォルトはありません前monitorMaxRateは、（1）選択されたときにこのエントリを起動するために指定する必要があります。
Note: The corresponding slapmPRMonControl
BITS setting, enableAggregateTraps(3), MUST be selected in
order for any notification relating to this entry to
potentially be generated."
::= { slapmPRMonEntry 12 }
slapmPRMonMaxRateLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for generating a slapmPolicyRuleMonOkay notification, signalling that a monitored maximum transfer rate has fallen to an acceptable level.
slapmPRMonMaxRateLowのOBJECT-TYPEの構文Unsigned32のUNITS MAX-ACCESSはリード作成ステータス現在の説明「監視最大転送レートが許容可能なレベルまで低下したことを知らせる、slapmPolicyRuleMonOkay通知を生成するための閾値「キロビット毎秒」。
A value of zero for this object is returned when the
slapmPRMonControl monitorMaxRate(1) is not
enabled. When enabled the default value for this object
is the max rate value specified in the associated
action definition minus 10%. If the action definition
doesn't have a max rate defined then there is no
default for this object and a value MUST be specified
prior to activating this entry when monitorMaxRate(1)
is selected.
Note: The corresponding slapmPRMonControl
BITS setting, enableAggregateTraps(3), MUST be selected in
order for any notification relating to this entry to
potentially be generated."
::= { slapmPRMonEntry 13 }
slapmPRMonMaxDelayHigh OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for generating a slapmPolicyRuleMonNotOkay notification, signalling that a monitored maximum delay rate has been exceeded.
slapmPRMonMaxDelayHigh OBJECT-TYPE構文Unsigned32ユニット「ミリ秒」MAX-ACCESS読作成ステータス現在の説明「slapmPolicyRuleMonNotOkay通知を生成するための閾値を、監視対象の最大遅延量を超えたことを知らせます。
A slapmPolicyRuleMonNotOkay notification is not
generated again for an slapmPRMonEntry until
the maximum delay rate falls below
slapmPRMonMaxDelayLow (a slapmPolicyRuleMonOkay
notification is then transmitted) and raises above
slapmPRMonMaxDelayHigh. This behavior reduces
the slapmPolicyRuleMonNotOkay notifications that are
transmitted.
A value of zero for this object is returned when the slapmPRMonControl monitorMaxDelay(4) is not enabled. When enabled the default value for this object is the max delay value specified in the associated action definition plus 10%. If the action definition doesn't have a max delay defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMaxDelay(4) is selected.
slapmPRMonControl monitorMaxDelay（4）が有効でない場合、このオブジェクトのためのゼロの値が返されます。有効にすると、このオブジェクトのデフォルト値は、関連するアクション定義+ 10％に指定された最大遅延値です。アクション定義は、定義された最大遅延を持っていない場合、このオブジェクトと値のデフォルトはありません前monitorMaxDelayは（4）選択されたときにこのエントリを起動するために指定する必要があります。
Note: The corresponding slapmPRMonControl
BITS setting, enableAggregateTraps(3), MUST be selected
in order for any notification relating to this entry to potentially be generated."
::= { slapmPRMonEntry 14 }
slapmPRMonMaxDelayLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for generating a slapmPolicyRuleMonOkay notification, signalling that a monitored maximum delay rate has fallen to an acceptable level.
slapmPRMonMaxDelayLow OBJECT-TYPE構文Unsigned32ユニット「ミリ秒」MAX-ACCESS読作成ステータス現在の説明「slapmPolicyRuleMonOkay通知を生成するための閾値を、監視対象の最大遅延量が許容レベルまで低下したことを知らせます。
A value of zero for this object is returned when the
slapmPRMonControl monitorMaxDelay(4) is not
enabled. When enabled the default value for this object
is the max delay value specified in the associated
action definition minus 10%. If the action definition
doesn't have a max delay defined then there is no
default for this object and a value MUST be specified
prior to activating this entry when monitorMaxDelay(4)
is selected.
Note: The corresponding slapmPRMonControl
BITS setting, enableAggregateTraps(3), MUST be selected
in order for any notification relating to this entry to
potentially be generated."
::= { slapmPRMonEntry 15 }
slapmPRMonMinInRateNotAchieves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a minimum transfer in rate
was not achieved."
::= { slapmPRMonEntry 16 }
slapmPRMonMaxInRateExceeds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a maximum transfer in rate
was exceeded."
::= { slapmPRMonEntry 17 }
slapmPRMonMaxDelayExceeds OBJECT-TYPE
slapmPRMonMaxDelayExceedsのOBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a maximum delay in rate
was exceeded."
::= { slapmPRMonEntry 18 }
slapmPRMonMinOutRateNotAchieves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a minimum transfer out rate
was not achieved."
::= { slapmPRMonEntry 19 }
slapmPRMonMaxOutRateExceeds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a maximum transfer out rate
was exceeded."
::= { slapmPRMonEntry 20 }
slapmPRMonCurrentDelayRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current delay rate for this entry. This is
calculated by taking the average of the TCP
round trip times for all associating
slapmSubcomponentTable entries within a interval."
::= { slapmPRMonEntry 21 }
slapmPRMonRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted in the slapmPRMonTable. An entry in this table is deleted by setting this object to destroy(6).
slapmPRMonRowStatus OBJECT-TYPE構文RowStatus MAX-ACCESSはリード作成ステータス現在の説明は「このオブジェクトエントリがslapmPRMonTableで作成され、削除されることを可能にする。この表のエントリは、（6）を破壊するためにこのオブジェクトを設定することによって削除されます。
Removal of an corresponding (same policy index) slapmPolicyRuleStatsEntry has the side effect of the
automatic deletion an entry in this table.
Note that an attempt to set any read-create object
defined within an slapmPRMonEntry while the value
of slapmPRMonRowStatus is active(1) will result in
an inconsistentValue error."
::= { slapmPRMonEntry 22 }
-- Notifications
- 通知
slapmMonitoredEventNotAchieved NOTIFICATION-TYPE OBJECTS { slapmPolicyMonitorIntTime, slapmPolicyMonitorControl, slapmPolicyMonitorStatus, slapmPolicyMonitorStatus, slapmPolicyMonitorCurrentInRate, slapmPolicyMonitorCurrentOutRate, slapmPolicyMonitorCurrentDelayRate } STATUS deprecated DESCRIPTION "This notification is generated when an monitored event is not achieved with respect to threshold. This applies only towards monitoring a policy traffic profile as an aggregate via an associating slapmPolicyStatsEntry. The value of slapmPolicyMonitorControl can be examined to determine what is being monitored. The first slapmPolicyMonitorStatus value supplies the current monitor status while the 2nd value supplies the previous status.
監視対象イベントを閾値に対して達成されない場合slapmMonitoredEventNotAchieved NOTIFICATION-TYPEオブジェクト{slapmPolicyMonitorIntTime、slapmPolicyMonitorControl、slapmPolicyMonitorStatus、slapmPolicyMonitorStatus、slapmPolicyMonitorCurrentInRate、slapmPolicyMonitorCurrentOutRate、slapmPolicyMonitorCurrentDelayRate}ステータス非難された説明は「この通知が生成される。これは、ポリシーのトラフィックプロフィールなどを監視することに向けて適用します2番目の値は前の状態を供給しながら関連付けるslapmPolicyStatsEntry介して集計。slapmPolicyMonitorControlの値が監視されているかを決定するために調べることができる。第一slapmPolicyMonitorStatus値は、現在のモニタのステータスを供給する。
Note: The corresponding slapmPolicyMonitorControl
BITS setting, enableAggregateTraps(3), MUST be
selected in order for this notification to
potentially be generated."
::= { slapmNotifications 1 }
slapmMonitoredEventOkay NOTIFICATION-TYPE OBJECTS { slapmPolicyMonitorIntTime, slapmPolicyMonitorControl, slapmPolicyMonitorStatus, slapmPolicyMonitorStatus, slapmPolicyMonitorCurrentInRate, slapmPolicyMonitorCurrentOutRate, slapmPolicyMonitorCurrentDelayRate } STATUS deprecated DESCRIPTION "This notification is generated when a monitored event has improved to an acceptable level. This applies only towards monitoring a policy traffic profile as an aggregate via an associating slapmPolicyStatsEntry. The value of slapmPolicyMonitorControl can be examined to determine what is being monitored. The first slapmPolicyMonitorStatus value supplies the current monitor status while the 2nd value supplies the previous status.
監視イベントが許容可能なレベルにまで向上しているときにslapmMonitoredEventOkay NOTIFICATION-TYPEオブジェクト{slapmPolicyMonitorIntTime、slapmPolicyMonitorControl、slapmPolicyMonitorStatus、slapmPolicyMonitorStatus、slapmPolicyMonitorCurrentInRate、slapmPolicyMonitorCurrentOutRate、slapmPolicyMonitorCurrentDelayRate}ステータス非難された説明は「この通知が生成される。これは、ポリシーのトラフィックプロファイルを監視向かって適用します関連付けslapmPolicyStatsEntry介し集計2値は前の状態を提供する。slapmPolicyMonitorControlの値が監視されているかを決定するために調べることができる。第一slapmPolicyMonitorStatus値は、現在のモニタのステータスを供給する。
Note: The corresponding slapmPolicyMonitorControl
BITS setting, enableAggregateTraps(3), MUST be
selected in order for this notification to
potentially be generated."
::= { slapmNotifications 2 }
slapmPolicyProfileDeleted NOTIFICATION-TYPE
OBJECTS {
slapmPolicyStatsActiveConns,
slapmPolicyStatsTotalConns,
slapmPolicyStatsFirstActivated,
slapmPolicyStatsLastMapping,
slapmPolicyStatsInOctets,
slapmPolicyStatsOutOctets,
slapmPolicyStatsConnectionLimit,
slapmPolicyStatsCountAccepts,
slapmPolicyStatsCountDenies,
slapmPolicyStatsInDiscards,
slapmPolicyStatsOutDiscards,
slapmPolicyStatsInPackets,
slapmPolicyStatsOutPackets,
slapmPolicyStatsInProfileOctets,
slapmPolicyStatsOutProfileOctets,
slapmPolicyStatsMinRate,
slapmPolicyStatsMaxRate,
slapmPolicyStatsMaxDelay
}
STATUS deprecated
DESCRIPTION
"A slapmPolicyDeleted notification is sent when a
slapmPolicyStatsEntry is deleted if the value of
slapmPolicyTrapEnable is enabled(1)."
::= { slapmNotifications 3 }
slapmPolicyMonitorDeleted NOTIFICATION-TYPE
OBJECTS {
slapmPolicyMonitorStatus,
slapmPolicyMonitorInterval,
slapmPolicyMonitorIntTime,
slapmPolicyMonitorCurrentInRate,
slapmPolicyMonitorCurrentOutRate,
slapmPolicyMonitorCurrentDelayRate,
slapmPolicyMonitorMinRateLow,
slapmPolicyMonitorMinRateHigh,
slapmPolicyMonitorMaxRateHigh,
slapmPolicyMonitorMaxRateLow,
slapmPolicyMonitorMaxDelayHigh,
slapmPolicyMonitorMaxDelayLow,
slapmPolicyMonitorMinInRateNotAchieves,
slapmPolicyMonitorMaxInRateExceeds,
slapmPolicyMonitorMaxDelayExceeds,
slapmPolicyMonitorMinOutRateNotAchieves,
slapmPolicyMonitorMaxOutRateExceeds
}
STATUS deprecated
DESCRIPTION
"A slapmPolicyMonitorDeleted notification is sent when a
slapmPolicyMonitorEntry is deleted if the value of
slapmPolicyTrapEnable is enabled(1)."
::= { slapmNotifications 4 }
slapmSubcomponentMonitoredEventNotAchieved NOTIFICATION-TYPE OBJECTS { slapmSubcomponentSystemAddress, slapmSubcomponentPolicyName, slapmSubcomponentTrafficProfileName, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorIntTime, slapmSubcomponentMonitorCurrentInRate, slapmSubcomponentMonitorCurrentOutRate, slapmSubcomponentTcpRoundTripTime } STATUS deprecated DESCRIPTION "This notification is generated when a monitored value does not achieved a threshold specification. This applies only towards monitoring the individual components of a policy traffic profile. The value of the corresponding slapmPolicyMonitorControl can be examined to determine what is being monitored. The first slapmSubcomponentMonitorStatus value supplies the current monitor status while the 2nd value supplies the previous status.
slapmSubcomponentMonitoredEventNotAchieved NOTIFICATION-TYPEオブジェクト{slapmSubcomponentSystemAddress、slapmSubcomponentPolicyName、slapmSubcomponentTrafficProfileName、slapmSubcomponentMonitorStatus、slapmSubcomponentMonitorStatus、slapmSubcomponentMonitorIntTime、slapmSubcomponentMonitorCurrentInRate、slapmSubcomponentMonitorCurrentOutRate、slapmSubcomponentTcpRoundTripTime}ステータス非難された説明は「この通知は、モニタ値が閾値仕様を達成していない場合に発生する。これは、個々の監視に向け適用しますポリシートラフィックプロファイルのコンポーネント。対応slapmPolicyMonitorControlの値が監視されているかを決定するために調べることができる。第2の値は、前の状態を供給しつつ、第1 slapmSubcomponentMonitorStatus値は、現在のモニタのステータスを供給する。
Note: The corresponding slapmPolicyMonitorControl
BITS setting, enableSubcomponentTraps(4), MUST be selected
in order for this notification to potentially be generated."
::= { slapmNotifications 5 }
slapmSubcomponentMonitoredEventOkay NOTIFICATION-TYPE OBJECTS { slapmSubcomponentSystemAddress, slapmSubcomponentPolicyName, slapmSubcomponentTrafficProfileName, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorIntTime, slapmSubcomponentMonitorCurrentInRate, slapmSubcomponentMonitorCurrentOutRate, slapmSubcomponentTcpRoundTripTime } STATUS deprecated DESCRIPTION "This notification is generated when a monitored value has reached an acceptable level.
slapmSubcomponentMonitoredEventOkay NOTIFICATION-TYPEオブジェクト{slapmSubcomponentSystemAddress、slapmSubcomponentPolicyName、slapmSubcomponentTrafficProfileName、slapmSubcomponentMonitorStatus、slapmSubcomponentMonitorStatus、slapmSubcomponentMonitorIntTime、slapmSubcomponentMonitorCurrentInRate、slapmSubcomponentMonitorCurrentOutRate、slapmSubcomponentTcpRoundTripTime}ステータス非難された説明「モニタ値が許容可能なレベルに達したときに、この通知が生成されます。
Note: The corresponding slapmPolicyMonitorControl
BITS setting, enableSubcomponentTraps(3), MUST be
selected in order for this notification to potentially
be generated."
::= { slapmNotifications 6 }
slapmPolicyRuleMonNotOkay NOTIFICATION-TYPE OBJECTS { slapmPRMonIntTime, slapmPRMonControl, slapmPRMonStatus, slapmPRMonStatus, slapmPRMonCurrentInRate, slapmPRMonCurrentOutRate, slapmPRMonCurrentDelayRate } STATUS current DESCRIPTION "This notification is generated when an monitored event is not achieved with respect to a threshold. This applies only towards monitoring a policy rule as an aggregate via an associating slapmPolicyRuleStatsEntry. The value of slapmPRMonControl can be examined to determine what is being monitored. The first slapmPRMonStatus value supplies the current monitor status while the 2nd value supplies the previous status.
監視対象イベントを閾値に対して達成されない場合slapmPolicyRuleMonNotOkay NOTIFICATION-TYPEオブジェクト{slapmPRMonIntTime、slapmPRMonControl、slapmPRMonStatus、slapmPRMonStatus、slapmPRMonCurrentInRate、slapmPRMonCurrentOutRate、slapmPRMonCurrentDelayRate}ステータス現在の説明は「この通知が生成される。これは、ポリシールールを監視向かってのみ適用します2番目の値は前の状態を供給しながら関連付けるslapmPolicyRuleStatsEntry介して集計。slapmPRMonControlの値が監視されているかを決定するために調べることができる。第一slapmPRMonStatus値は、現在のモニタのステータスを供給する。
Note: The corresponding slapmPRMonControl
BITS setting, enableAggregateTraps(3), MUST be
selected in order for this notification to
potentially be generated."
::= { slapmNotifications 7 }
slapmPolicyRuleMonOkay NOTIFICATION-TYPE OBJECTS { slapmPRMonIntTime, slapmPRMonControl, slapmPRMonStatus, slapmPRMonStatus, slapmPRMonCurrentInRate, slapmPRMonCurrentOutRate, slapmPRMonCurrentDelayRate } STATUS current DESCRIPTION "This notification is generated when a monitored event has improved to an acceptable level. This applies only towards monitoring a policy rule as an aggregate via an associating slapmPolicyRuleStatsEntry. The value of slapmPRMonControl can be examined to determine what is being monitored. The first slapmPRMonStatus value supplies the current monitor status while the 2nd value supplies the previous status.
slapmPolicyRuleMonOkay NOTIFICATION-TYPEオブジェクト{slapmPRMonIntTime、slapmPRMonControl、slapmPRMonStatus、slapmPRMonStatus、slapmPRMonCurrentInRate、slapmPRMonCurrentOutRate、slapmPRMonCurrentDelayRate}ステータス現在の説明「監視イベントが許容可能なレベルにまで向上しているときに、この通知が生成される。これは集合体としてポリシールールを監視向かって適用します2番目の値は前の状態を供給しながら関連付けるslapmPolicyRuleStatsEntry介し。slapmPRMonControlの値が監視されているかを決定するために調べることができる。第一slapmPRMonStatus値は、現在のモニタのステータスを供給する。
Note: The corresponding slapmPRMonControl
BITS setting, enableAggregateTraps(3), MUST be
selected in order for this notification to
potentially be generated."
::= { slapmNotifications 8 }
slapmPolicyRuleDeleted NOTIFICATION-TYPE
OBJECTS {
slapmPolicyRuleStatsActiveConns,
slapmPolicyRuleStatsTotalConns,
slapmPolicyRuleStatsLActivated,
slapmPolicyRuleStatsLastMapping,
slapmPolicyRuleStatsInOctets, slapmPolicyRuleStatsOutOctets,
slapmPolicyRuleStatsConnLimit,
slapmPolicyRuleStatsCountAccepts,
slapmPolicyRuleStatsCountDenies,
slapmPolicyRuleStatsInDiscards,
slapmPolicyRuleStatsOutDiscards,
slapmPolicyRuleStatsInPackets,
slapmPolicyRuleStatsOutPackets,
slapmPolicyRuleStatsInProOctets,
slapmPolicyRuleStatsOutProOctets,
slapmPolicyRuleStatsMinRate,
slapmPolicyRuleStatsMaxRate,
slapmPolicyRuleStatsMaxDelay,
slapmPolicyRuleStatsTotalRsvpFlows,
slapmPolicyRuleStatsActRsvpFlows
}
STATUS current
DESCRIPTION
"A slapmPolicyRuleDeleted notification is sent when a
slapmPolicyRuleStatsEntry is deleted if the value of
slapmPolicyTrapEnable is enabled(1)."
::= { slapmNotifications 9 }
slapmPolicyRuleMonDeleted NOTIFICATION-TYPE
OBJECTS {
slapmPRMonControl,
slapmPRMonStatus,
slapmPRMonInterval,
slapmPRMonIntTime,
slapmPRMonCurrentInRate,
slapmPRMonCurrentOutRate,
slapmPRMonCurrentDelayRate,
slapmPRMonMinRateLow,
slapmPRMonMinRateHigh,
slapmPRMonMaxRateHigh,
slapmPRMonMaxRateLow,
slapmPRMonMaxDelayHigh,
slapmPRMonMaxDelayLow,
slapmPRMonMinInRateNotAchieves,
slapmPRMonMaxInRateExceeds,
slapmPRMonMaxDelayExceeds,
slapmPRMonMinOutRateNotAchieves,
slapmPRMonMaxOutRateExceeds
}
STATUS current
DESCRIPTION
"A slapmPolicyRuleMonDeleted notification is sent when a
slapmPRMonEntry is deleted if the value of slapmPolicyTrapEnable is enabled(1)."
::= { slapmNotifications 10 }
slapmSubcMonitorNotOkay NOTIFICATION-TYPE OBJECTS { slapmSubcomponentSystemAddress, slapmSubcomponentPolicyRuleIndex, slapmPRMonControl, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorIntTime, slapmSubcomponentMonitorCurrentInRate, slapmSubcomponentMonitorCurrentOutRate, slapmSubcomponentTcpRoundTripTime } STATUS current DESCRIPTION "This notification is generated when a monitored value does not achieved a threshold specification. This applies only towards monitoring the individual components of a policy rule. The value of the corresponding slapmPRMonControl can be examined to determine what is being monitored. The first slapmSubcomponentMonitorStatus value supplies the current monitor status while the 2nd value supplies the previous status.
slapmSubcMonitorNotOkay NOTIFICATION-TYPEオブジェクト{slapmSubcomponentSystemAddress、slapmSubcomponentPolicyRuleIndex、slapmPRMonControl、slapmSubcomponentMonitorStatus、slapmSubcomponentMonitorStatus、slapmSubcomponentMonitorIntTime、slapmSubcomponentMonitorCurrentInRate、slapmSubcomponentMonitorCurrentOutRate、slapmSubcomponentTcpRoundTripTime}ステータス現在の説明は「この通知は、モニタ値が閾値仕様を達成していない場合に発生する。これは、個々の監視に向け適用しますポリシールールの構成要素。対応slapmPRMonControlの値が監視されているかを決定するために調べることができる。第2の値は、前の状態を供給しつつ、第1 slapmSubcomponentMonitorStatus値は、現在のモニタのステータスを供給する。
Note: The corresponding slapmPRMonControl
BITS setting, enableSubcomponentTraps(4), MUST be selected
in order for this notification to potentially be generated."
::= { slapmNotifications 11 }
slapmSubcMonitorOkay NOTIFICATION-TYPE OBJECTS { slapmSubcomponentSystemAddress, slapmSubcomponentPolicyRuleIndex, slapmPRMonControl, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorIntTime, slapmSubcomponentMonitorCurrentInRate, slapmSubcomponentMonitorCurrentOutRate, slapmSubcomponentTcpRoundTripTime }
slapmSubcMonitorOkay NOTIFICATION-TYPEオブジェクト{slapmSubcomponentSystemAddress、slapmSubcomponentPolicyRuleIndex、slapmPRMonControl、slapmSubcomponentMonitorStatus、slapmSubcomponentMonitorStatus、slapmSubcomponentMonitorIntTime、slapmSubcomponentMonitorCurrentInRate、slapmSubcomponentMonitorCurrentOutRate、slapmSubcomponentTcpRoundTripTime}
STATUS current DESCRIPTION "This notification is generated when a monitored value has reached an acceptable level.
モニタ値が許容可能なレベルに達したときにSTATUS current DESCRIPTION「この通知が生成されます。
Note: The corresponding slapmPRMonControl
BITS setting, enableSubcomponentTraps(3), MUST be
selected in order for this notification to potentially
be generated."
::= { slapmNotifications 12 }
-- Conformance information -- Compliance statements
- 適合情報 - コンプライアンスステートメント
slapmCompliances OBJECT IDENTIFIER ::= { slapmConformance 1 }
slapmGroups OBJECT IDENTIFIER ::= { slapmConformance 2 }
-- Compliance statements
- コンプライアンスステートメント
slapmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the SLAPM-MIB." MODULE -- this module MANDATORY-GROUPS { slapmBaseGroup2, slapmNotGroup2 } GROUP slapmEndSystemGroup2 DESCRIPTION "The contents of this group is required by end-system implementations." GROUP slapmEndSystemNotGroup2 DESCRIPTION "The contents of this group is required by end-system implementations." GROUP slapmBaseGroup DESCRIPTION "The contents of this group has been deprecated in favor of the new slapmBaseGroup2. Older implementations of this MIB would continue its support of the contents of this group." GROUP slapmNotGroup DESCRIPTION "The contents of this group has been deprecated in favor of the new slapmNotGroup2. Older implementations of this MIB would continue its support of the contents of this group." GROUP slapmOptionalGroup DESCRIPTION "The contents of this group has been deprecated."
slapmCompliance MODULE-COMPLIANCEステータス現在の説明 "SLAPM-MIBのための準拠宣言。" MODULE - このモジュールMANDATORY-GROUPS {slapmBaseGroup2、slapmNotGroup2} GROUP slapmEndSystemGroup2のDESCRIPTION "このグループの内容は、エンドシステムの実装によって必要とされます。" GROUP slapmEndSystemNotGroup2 DESCRIPTION「このグループの内容は、エンドシステムの実装によって必要とされます。」 GROUP slapmBaseGroupのDESCRIPTION「このグループの内容は新しいslapmBaseGroup2の賛成で廃止されました。このMIBの古い実装はこのグループの内容の支援を続けるだろう。」 GROUP slapmNotGroupのDESCRIPTION「このグループの内容は新しいslapmNotGroup2の賛成で廃止されました。このMIBの古い実装はこのグループの内容の支援を続けるだろう。」 GROUP slapmOptionalGroup DESCRIPTION「このグループの内容は廃止されました。」
GROUP slapmEndSystemGroup
DESCRIPTION
"The contents of this group has been deprecated in favor
of the new slapmEndSystemGroup2. Older implementations
of this MIB would continue its support of the
contents of this group."
GROUP slapmEndSystemNotGroup
DESCRIPTION
"The contents of this group has been deprecated in favor
of the new slapmEndSystemNotGroup2. Older
implementations of this MIB would continue its support
of the contents of this group."
::= { slapmCompliances 1 }
-- MIB groupings
- MIBのグループ化
slapmBaseGroup OBJECT-GROUP
OBJECTS {
slapmSpinLock,
slapmPolicyCountQueries,
slapmPolicyCountAccesses,
slapmPolicyCountSuccessAccesses,
slapmPolicyCountNotFounds,
slapmPolicyPurgeTime,
slapmPolicyTrapEnable,
slapmPolicyStatsOperStatus,
slapmPolicyStatsActiveConns,
slapmPolicyStatsFirstActivated,
slapmPolicyStatsLastMapping,
slapmPolicyStatsInOctets,
slapmPolicyStatsOutOctets,
slapmPolicyStatsConnectionLimit,
slapmPolicyStatsTotalConns,
slapmPolicyStatsCountAccepts,
slapmPolicyStatsCountDenies,
slapmPolicyStatsInDiscards,
slapmPolicyStatsOutDiscards,
slapmPolicyStatsInPackets,
slapmPolicyStatsOutPackets,
slapmPolicyStatsMinRate,
slapmPolicyStatsMaxRate,
slapmPolicyStatsMaxDelay,
slapmPolicyMonitorControl,
slapmPolicyMonitorStatus,
slapmPolicyMonitorInterval,
slapmPolicyMonitorIntTime,
slapmPolicyMonitorCurrentInRate,
slapmPolicyMonitorCurrentOutRate, slapmPolicyMonitorMinRateLow,
slapmPolicyMonitorMinRateHigh,
slapmPolicyMonitorMaxRateHigh,
slapmPolicyMonitorMaxRateLow,
slapmPolicyMonitorMaxDelayHigh,
slapmPolicyMonitorMaxDelayLow,
slapmPolicyMonitorMinInRateNotAchieves,
slapmPolicyMonitorMaxInRateExceeds,
slapmPolicyMonitorMaxDelayExceeds,
slapmPolicyMonitorMinOutRateNotAchieves,
slapmPolicyMonitorMaxOutRateExceeds,
slapmPolicyMonitorCurrentDelayRate,
slapmPolicyMonitorRowStatus
}
STATUS deprecated
DESCRIPTION
"The group of objects defined by this MIB that are
required for all implementations to be compliant."
::= { slapmGroups 1 }
slapmOptionalGroup OBJECT-GROUP
OBJECTS {
slapmPolicyStatsInProfileOctets,
slapmPolicyStatsOutProfileOctets
}
STATUS deprecated
DESCRIPTION
"The group of objects defined by this MIB that are
optional."
::= { slapmGroups 2 }
slapmEndSystemGroup OBJECT-GROUP
OBJECTS {
slapmPolicyTrapFilter,
slapmSubcomponentProtocol,
slapmSubcomponentSystemAddress,
slapmSubcomponentPolicyName,
slapmSubcomponentTrafficProfileName,
slapmSubcomponentLastActivity,
slapmSubcomponentInOctets,
slapmSubcomponentOutOctets,
slapmSubcomponentTcpOutBufferedOctets,
slapmSubcomponentTcpInBufferedOctets,
slapmSubcomponentTcpReXmts,
slapmSubcomponentTcpRoundTripTime,
slapmSubcomponentTcpRoundTripVariance,
slapmSubcomponentInPdus,
slapmSubcomponentOutPdus, slapmSubcomponentApplName,
slapmSubcomponentMonitorStatus,
slapmSubcomponentMonitorIntTime,
slapmSubcomponentMonitorCurrentOutRate,
slapmSubcomponentMonitorCurrentInRate
}
STATUS deprecated
DESCRIPTION
"The group of objects defined by this MIB that are
required for end system implementations."
::= { slapmGroups 3 }
slapmNotGroup NOTIFICATION-GROUP
NOTIFICATIONS {
slapmMonitoredEventNotAchieved,
slapmMonitoredEventOkay,
slapmPolicyProfileDeleted,
slapmPolicyMonitorDeleted
}
STATUS deprecated
DESCRIPTION
"The group of notifications defined by this MIB that MUST
be implemented."
::= { slapmGroups 4 }
slapmEndSystemNotGroup NOTIFICATION-GROUP
NOTIFICATIONS {
slapmSubcomponentMonitoredEventNotAchieved,
slapmSubcomponentMonitoredEventOkay
}
STATUS deprecated
DESCRIPTION
"The group of objects defined by this MIB that are
required for end system implementations."
::= { slapmGroups 5 }
slapmBaseGroup2 OBJECT-GROUP
OBJECTS {
slapmSpinLock,
slapmPolicyCountQueries,
slapmPolicyCountAccesses,
slapmPolicyCountSuccessAccesses,
slapmPolicyCountNotFounds,
slapmPolicyPurgeTime,
slapmPolicyTrapEnable,
slapmPolicyNameOfRule,
slapmPolicyRuleStatsOperStatus,
slapmPolicyRuleStatsActiveConns, slapmPolicyRuleStatsTotalConns,
slapmPolicyRuleStatsLActivated,
slapmPolicyRuleStatsLastMapping,
slapmPolicyRuleStatsInOctets,
slapmPolicyRuleStatsOutOctets,
slapmPolicyRuleStatsConnLimit,
slapmPolicyRuleStatsCountAccepts,
slapmPolicyRuleStatsCountDenies,
slapmPolicyRuleStatsInDiscards,
slapmPolicyRuleStatsOutDiscards,
slapmPolicyRuleStatsInPackets,
slapmPolicyRuleStatsOutPackets,
slapmPolicyRuleStatsInProOctets,
slapmPolicyRuleStatsOutProOctets,
slapmPolicyRuleStatsMinRate,
slapmPolicyRuleStatsMaxRate,
slapmPolicyRuleStatsMaxDelay,
slapmPolicyRuleStatsTotalRsvpFlows,
slapmPolicyRuleStatsActRsvpFlows,
slapmPRMonControl,
slapmPRMonStatus,
slapmPRMonInterval,
slapmPRMonIntTime,
slapmPRMonCurrentInRate,
slapmPRMonCurrentOutRate,
slapmPRMonMinRateLow,
slapmPRMonMinRateHigh,
slapmPRMonMaxRateHigh,
slapmPRMonMaxRateLow,
slapmPRMonMaxDelayHigh,
slapmPRMonMaxDelayLow,
slapmPRMonMinInRateNotAchieves,
slapmPRMonMaxInRateExceeds,
slapmPRMonMaxDelayExceeds,
slapmPRMonMinOutRateNotAchieves,
slapmPRMonMaxOutRateExceeds,
slapmPRMonCurrentDelayRate,
slapmPRMonRowStatus
}
STATUS current
DESCRIPTION
"The group of objects defined by this MIB that are
required for all implementations to be compliant."
::= { slapmGroups 6 }
slapmEndSystemGroup2 OBJECT-GROUP
OBJECTS {
slapmPolicyTrapFilter, slapmSubcomponentProtocol,
slapmSubcomponentSystemAddress,
slapmSubcomponentLastActivity,
slapmSubcomponentInOctets,
slapmSubcomponentOutOctets,
slapmSubcomponentTcpOutBufferedOctets,
slapmSubcomponentTcpInBufferedOctets,
slapmSubcomponentTcpReXmts,
slapmSubcomponentTcpRoundTripTime,
slapmSubcomponentTcpRoundTripVariance,
slapmSubcomponentInPdus,
slapmSubcomponentOutPdus,
slapmSubcomponentApplName,
slapmSubcomponentMonitorStatus,
slapmSubcomponentMonitorIntTime,
slapmSubcomponentMonitorCurrentOutRate,
slapmSubcomponentMonitorCurrentInRate,
slapmSubcomponentPolicyRuleIndex
}
STATUS current
DESCRIPTION
"The group of objects defined by this MIB that are
required for end system implementations."
::= { slapmGroups 7 }
slapmNotGroup2 NOTIFICATION-GROUP
NOTIFICATIONS {
slapmPolicyRuleMonNotOkay,
slapmPolicyRuleMonOkay,
slapmPolicyRuleDeleted,
slapmPolicyRuleMonDeleted
}
STATUS current
DESCRIPTION
"The group of notifications defined by this MIB that MUST
be implemented."
::= { slapmGroups 8 }
slapmEndSystemNotGroup2 NOTIFICATION-GROUP
NOTIFICATIONS {
slapmSubcMonitorNotOkay,
slapmSubcMonitorOkay
}
STATUS current
DESCRIPTION
"The group of objects defined by this MIB that are
required for end system implementations."
::= { slapmGroups 9 }
END
終わり
Certain management information in the MIB defined by this document may be considered sensitive in some network environments. Therefore, authentication of received SNMP requests and controlled access to management information SHOULD be employed in such environments. The method for this authentication is a function of the SNMP Administrative Framework, and has not been expanded by this MIB.
この文書で定義されたMIB内の特定の管理情報には、いくつかのネットワーク環境で敏感で考慮することができます。したがって、管理情報を受信したSNMP要求の認証およびアクセス制御は、そのような環境で使用されるべきです。この認証方法については、SNMP管理フレームワークの機能であり、このMIBによって拡張されていません。
To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (VACM) defined in RFC 2575 [11] for tables in which multiple users may need to independently create or modify entries, the initial index is used as an "owner index" (refer to slapmPRMonOwnerIndex in an slapmPRMonEntry). Such an initial index has a syntax of SnmpAdminString, and can thus be trivially mapped to a securityName or groupName as defined in VACM, in accordance with a security policy.
RFC 2575で定義されたビューベースアクセス制御モデル（VACM）を使用して、セキュリティ管理者がアクセス制御のプロビジョニングを容易にするために、[11]複数のユーザが独立にエントリを作成または変更する必要がある可能性のあるテーブルに対して、初期のインデックスは次のように使用されています「所有者指数」（slapmPRMonEntryにslapmPRMonOwnerIndexを参照してください）。そのような初期のインデックスはれるSnmpAdminStringの構文を有し、セキュリティポリシーに従って、VACMで定義され、したがって自明のsecurityNameまたはグループ名にマッピングすることができます。
All entries in related tables belonging to a particular user will have the same value for this initial index. For a given user's entries in a particular table, the object identifiers for the information in these entries will have the same subidentifiers (except for the "column" subidentifier) up to the end of the encoded owner index. To configure VACM to permit access to this portion of the table, one would create vacmViewTreeFamilyTable entries with the value of vacmViewTreeFamilySubtree including the owner index portion, and vacmViewTreeFamilyMask "wildcarding" the column subidentifier. More elaborate configurations are possible. The VACM access control mechanism described above provides control
特定のユーザーに属する関連するテーブルのすべてのエントリは、この初期のインデックスのための同じ値を持つことになります。特定のテーブル内の指定されたユーザのエントリを、これらのエントリの情報のためのオブジェクト識別子は、符号化された所有者インデックスの終わりまで（「列」サブ識別子を除いて）同じサブ識別子を有することになります。テーブルのこの部分へのアクセスを可能にするためにVACMを構成するには、一つは、所有者インデックス部分を含むvacmViewTreeFamilySubtreeの値、およびvacmViewTreeFamilyMask「ワイルドカード」欄のサブ識別子でvacmViewTreeFamilyTableのエントリを作成します。より複雑な構成が可能です。上記VACMアクセス制御機構は、制御を提供します
It is RECOMMENDED that the slapmPRMonTable (equivalent to the deprecated slapmPolicyMonitorTable) and the slapmSubcomponentTable not be supported in insecure environments.
（非推奨slapmPolicyMonitorTableに相当）slapmPRMonTableとslapmSubcomponentTableが安全でない環境ではサポートしないことをお勧めします。
The IETF takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on the IETF's procedures with respect to rights in standards-track and standards-related documentation can be found in BCP-11. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF Secretariat.
IETFは、そのような権限下で、ライセンスがたりないかもしれない可能性があるためにどの本書または程度に記載されている技術の実装や使用に関係すると主張される可能性があります任意の知的財産やその他の権利の有効性または範囲に関していかなる位置を取りません利用可能。また、そうした権利を特定するために取り組んできたことを表していないん。スタンダードトラックおよび標準関連文書における権利に関するIETFの手続きの情報は、BCP-11に記載されています。権利の主張のコピーは、出版のために利用可能とライセンスの保証が利用できるようにする、あるいは本仕様の実装者または利用者がそのような所有権の使用のための一般的なライセンスまたは許可を取得するために作られた試みの結果を得ることができますIETF事務局から。
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights which may cover technology that may be required to practice this standard. Please address the information to the IETF Executive Director.
IETFは、その注意にこの標準を実践するために必要な場合があり技術をカバーすることができる任意の著作権、特許または特許出願、またはその他の所有権を持ってすべての利害関係者を招待します。 IETF専務に情報を扱ってください。
This document is an individual submission and not the product of any IETF working group. Special thanks should be given to Robert Moore of IBM for his numerous reviews.
この文書は、個々の提出ではなく任意のIETFワーキンググループの製品です。特別な感謝は彼の数多くのレビューのためにIBMのロバート・ムーアに与えられるべきです。
[1] Case, J., Fedor, M., Schoffstall, M. and J. Davin, "Simple Network Management Protocol", STD 15, RFC 1157, May 1990.
[1]ケース、J.、ヒョードル、M.、Schoffstall、M.、およびJ.デーヴィン、 "簡単なネットワーク管理プロトコル"、STD 15、RFC 1157、1990年5月。
[2] McCloghrie, K. and M. Rose, Editors, "Management Information Base for Network Management of TCP/IP-based internets: MIB-II", STD 17, RFC 1213, March 1991.
[2] McCloghrie、K.とM.ローズ、エディターズ、 "TCP / IPベースのインターネットのネットワーク管理のための管理情報ベース：MIB-II"、STD 17、RFC 1213、1991年3月。
[3] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[3] McCloghrie、K.、パーキンス、D.、Schoenwaelder、J.、ケース、J.、ローズ、M.およびS. Waldbusser、 "経営情報バージョン2（SMIv2）の構造"、STD 58、RFC 2578、 1999年4月。
[4] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999.
[4] McCloghrie、K.、パーキンス、D.、Schoenwaelder、J.、ケース、J.、ローズ、M.およびS. Waldbusser、 "SMIv2のためのテキストの表記法"、STD 58、RFC 2579、1999年4月。
[5] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999.
[5] McCloghrie、K.、パーキンス、D.、Schoenwaelder、J.、ケース、J.、ローズ、M.およびS. Waldbusser、STD 58、RFC 2580、1999年4月 "SMIv2のための順応文"。
[6] Case, J., McCloghrie, K., Rose, M. and Waldbusser, S., "Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1905, January 1996.
[6]ケース、J.、McCloghrie、K.、ローズ、M.とWaldbusser、S.、 "簡易ネットワーク管理プロトコルのバージョン2のためのプロトコル操作（SNMPv2の）"、RFC 1905、1996年1月。
[7] Harrington D., Presuhn, R. and B. Wijnen, "An Architecture for Describing SNMP Management Frameworks", RFC 2571, April 1999.
[7]ハリントンD.、PresuhnとR.とB. Wijnen、、RFC 2571、1999年4月 "SNMP管理フレームワークを記述するためのアーキテクチャ"。
[8] Case, J., Harrington D., Presuhn, R. and B. Wijnen, "Message Processing and Dispatching for the Simple Network Management Protocol (SNMP)", RFC 2572, April 1999.
[8]ケース、J.、ハリントンD.、PresuhnとR.とB. Wijnen、 "メッセージ処理と簡単なネットワーク管理プロトコル（SNMP）のための派遣"、RFC 2572、1999年4月。
[9] Levi D., Meyer P. and B. Stewart, "SNMPv3 Applications", RFC 2573, April 1999.
[9]レヴィD.、マイヤーP.およびB.スチュワート、 "SNMPv3のアプリケーション"、RFC 2573、1999年4月。
[10] Blumenthal, U. and B. Wijnen, "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)", RFC 2574, April 1999.
[10]ブルーメンソール、U.とB. Wijnenの、 "ユーザベースセキュリティモデル（USM）簡易ネットワーク管理プロトコル（SNMPv3の）のバージョン3のために"、RFC 2574、1999年4月。
[11] Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)", RFC 2575, April 1999.
[11] Wijnenの、B.、Presuhn、R.とK. McCloghrie、 "簡易ネットワーク管理プロトコルのためのビューベースアクセス制御モデル（VACM）（SNMP）"、RFC 2575、1999年4月。
[12] Hovey, R. and S. Bradner, "The Organizations Involved in the IETF Standards Process", BCP 11, RFC 2028, October 1996.
[12] Hovey、R.およびS.ブラドナー、BCP 11、RFC 2028、1996年10月 "IETF標準化プロセスに関与する組織"。
[13] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.
[13]ブラドナーの、S.、 "要件レベルを示すためにRFCsにおける使用のためのキーワード"、BCP 14、RFC 2119、1997年3月。
[14] Rose, M. and K. McCloghrie, "Structure and Identification of Management Information for TCP/IP-based Internets", STD 16, RFC 1155, May 1990.
[14]ローズ、M.、およびK. McCloghrie、 "構造とTCP / IPベースのインターネットのための経営情報の識別"、STD 16、RFC 1155、1990年5月。
[15] Rose, M. and K. McCloghrie, "Concise MIB Definitions", STD 16, RFC 1212, March 1991.
[15]ローズ、M.、およびK. McCloghrie、 "簡潔なMIB定義"、STD 16、RFC 1212、1991年3月。
[16] Rose, M., "A Convention for Defining Traps for use with the SNMP", RFC 1215, March 1991.
[16]ローズ、M.、 "SNMPとの使用のためのDefining Trapsのための条約"、RFC 1215、1991年3月。
[17] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, "Introduction to Community-based SNMPv2", RFC 1901, January 1996.
[17]ケース、J.、McCloghrie、K.、ローズ、M.およびS. Waldbusser、 "コミュニティベースのSNMPv2の概要"、RFC 1901、1996年1月。
[18] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, "Transport Mappings for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1906, January 1996.
[18]ケース、J.、McCloghrie、K.、ローズ、M.、およびS. Waldbusser、RFC 1906 "簡易ネットワーク管理プロトコル（SNMPv2）のバージョン2のための交通マッピング"、1996年1月。
[19] McCloghrie, K. and A. Bierman, "Entity MIB using SMIv2", RFC 2037, October 1996.
[19] McCloghrie、K.とA. Bierman、 "SMIv2のを使用してエンティティMIB"、RFC 2037、1996年10月。
[20] Bradner, S., "The Internet Standards Process -- Revision 3", BCP 9, RFC 2026, October 1996.
[20]ブラドナーの、S.、 "インターネット標準化プロセス - リビジョン3"、BCP 9、RFC 2026、1996年10月。
Kenneth D. White Dept. BRQA/Bldg. 501/G114 IBM Corporation P.O.Box 12195 3039 Cornwallis Research Triangle Park, NC 27709, USA
ケネス・D.ホワイト本部BRQA /ビル。 501 / G114 IBMコーポレーションP.O.Box 12195 3039コーンリサーチトライアングルパーク、NC 27709、USA
EMail: wkenneth@us.ibm.com
メールアドレス：wkenneth@us.ibm.com
Copyright (C) The Internet Society (2000). All Rights Reserved.
著作権（C）インターネット協会（2000）。全著作権所有。
This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English.
この文書とその翻訳は、コピーして他の人に提供し、それ以外についてはコメントまたは派生物は、いかなる種類の制限もなく、全体的にまたは部分的に、準備コピーし、公表して配布することができることを説明したり、その実装を支援することができます、上記の著作権表示とこの段落は、すべてのそのようなコピーや派生物に含まれていることを条件とします。しかし、この文書自体は著作権のための手順はで定義されている場合には、インターネット標準を開発するために必要なものを除き、インターネットソサエティもしくは他のインターネット関連団体に著作権情報や参照を取り除くなど、どのような方法で変更されないかもしれませんインターネット標準化プロセスが続く、または英語以外の言語に翻訳するために、必要に応じなければなりません。
The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns.
上記の制限は永久で、インターネット学会やその後継者や譲渡者によって取り消されることはありません。
This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
この文書とここに含まれている情報は、基礎とインターネットソサエティおよびインターネットエンジニアリングタスクフォースはすべての保証を否認し、明示または黙示、その情報の利用がない任意の保証を含むがこれらに限定されない「として、」上に設けられています特定の目的への権利または商品性または適合性の黙示の保証を侵害します。
Acknowledgement
謝辞
Funding for the RFC Editor function is currently provided by the Internet Society.
RFC Editor機能のための基金は現在、インターネット協会によって提供されます。