Network Working Group C. Sikes
Request for Comments: 4319 Zhone Technologies, Inc.
Obsoletes: 3276 B. Ray
Category: Standards Track PESA Switching Systems, Inc.
R. Abbi
Alcatel USA
December 2005
Definitions of Managed Objects for
High Bit-Rate DSL - 2nd generation (HDSL2) and
Single-Pair High-Speed Digital Subscriber Line (SHDSL) Lines
Status of This Memo
このメモのステータス
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
この文書は、インターネットコミュニティのためのインターネット標準トラックプロトコルを指定し、改善のための議論と提案を要求します。このプロトコルの標準化状態と状態への「インターネット公式プロトコル標準」（STD 1）の最新版を参照してください。このメモの配布は無制限です。
Copyright Notice
著作権表示
Copyright (C) The Internet Society (2005).
著作権（C）インターネット協会（2005）。
Abstract
抽象
This document defines a Management Information Base (MIB) module for use with network management protocols in the Internet community. In particular, it describes objects used for managing High Bit-Rate Digital Subscriber Line (DSL) - 2nd generation (HDSL2) and Single-Pair High-Speed Digital Subscriber Line (SHDSL) interfaces. This document introduces extensions to several objects and textual conventions defined in HDSL2-SHDSL-Line MIB (RFC 3276). This document obsoletes RFC 3276.
この文書は、インターネットコミュニティでのネットワーク管理プロトコルで使用するための管理情報ベース（MIB）のモジュールを定義します。第2世代（HDSL2）とシングルペア高速デジタル加入者線（SHDSL）インターフェース - 特に、高ビットレートデジタル加入者線（DSL）を管理するために使用されるオブジェクトについて説明します。この文書では、HDSL2-SHDSLラインMIB（RFC 3276）で定義された複数のオブジェクトやテキストの表記法への拡張を紹介します。この文書はRFC 3276を廃止します。
Table of Contents
目次
1. The Internet-Standard Management Framework ......................2
2. Overview ........................................................2
2.1. Relationship to Other MIBs .................................3
2.1.1. General IF-MIB Integration (RFC 2863) ...............3
2.1.2. Usage of ifTable ....................................3
2.2. IANA Considerations ........................................4
2.3. Conventions Used in the MIB Module .........................5
2.3.1. Naming Conventions ..................................5
2.3.2. Textual Conventions .................................5
2.4. Structure ..................................................7
2.5. Line Topology ..............................................9
2.6. Counters, Interval Buckets, and Thresholds ................10
2.7. Profiles ..................................................11
2.8. Notifications .............................................12
3. Definitions ....................................................14
4. Implementation Analysis ........................................66
5. Security Considerations ........................................66
6. Acknowledgements ...............................................71
7. References .....................................................72
7.1. Normative References ......................................72
7.2. Informative References ....................................73
For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to Section 7 of RFC 3410 [RFC3410].
現在のインターネット標準の管理フレームワークを記述したドキュメントの詳細な概要については、RFC 3410 [RFC3410]のセクション7を参照してください。
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580].
管理対象オブジェクトが仮想情報店を介してアクセスされ、管理情報ベースまたはMIBと呼ばれます。 MIBオブジェクトは、一般的に簡易ネットワーク管理プロトコル（SNMP）を介してアクセスされます。 MIBのオブジェクトは、管理情報（SMI）の構造で定義されたメカニズムを使用して定義されています。このメモは、STD 58、RFC 2578 [RFC2578]、STD 58、RFC 2579 [RFC2579]とSTD 58、RFC 2580 [RFC2580]に記載されているSMIv2のに準拠しているMIBモジュールを指定します。
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].
この文書のキーワード "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", および "OPTIONAL" はRFC 2119 [RFC2119]に記載されているように解釈されます。
This document defines a Management Information Base (MIB) module for use with network management protocols in the Internet community for the purpose of managing HDSL2/SHDSL lines.
この文書では、HDSL2 / SHDSLラインを管理する目的のためのインターネットコミュニティでのネットワーク管理プロトコルで使用するための管理情報ベース（MIB）のモジュールを定義します。
The MIB module described in RFC 3276 [RFC3276] describes objects used for managing High Bit-Rate DSL - 2nd generation (HDSL2) [T1E1.4] and Single-Pair High-Speed Digital Subscriber Line (SHDSL) interfaces [G.991.2]. These object descriptions are based upon the specifications for the HDSL2 and SHDSL Embedded Operations Channel (EOC), as defined in the American National Standards Institute (ANSI) T1E1.4/2000-006 [T1E1.4] and International Telecommunication Union (ITU) G.991.2 [G.991.2].
第2世代（HDSL2）[T1E1.4]とシングルペア高速デジタル加入者線（SHDSL）インターフェース[G.991.2] - RFC 3276に記述MIBモジュール[RFC3276]は高ビットレートのDSLを管理するために使用されるオブジェクトについて説明します。米国規格協会（ANSI）T1E1.4 / 2000から006 [T1E1.4]および国際電気通信連合（ITU）で定義されているこれらのオブジェクト記述は、HDSL2とSHDSL組み込み操作チャネル（EOC）の仕様に基づいていますG.991.2 [G.991.2]。
This document obsoletes RFC 3276 [RFC3276], which supports G.shdsl in that the MIB module described herein supports G.shdsl.bis as described in the G.991.2 [G.991.2]. In addition, objects have been added to improve the management of SHDSL lines.
この文書では、G.991.2 [G.991.2]に記載されているように、本明細書に記載のMIBモジュールはG.shdsl.bisをサポートしていることでG.SHDSLをサポートRFC 3276 [RFC3276]を、時代遅れ。また、オブジェクトは、SHDSLラインの管理を改善するために添加されてきました。
The MIB module is located in the MIB tree under MIB 2 transmission, as discussed in the MIB-2 Integration (RFC 2863 [RFC2863]) section of this document.
この文書のMIB-2統合（RFC 2863 [RFC2863]）のセクションで説明したようにMIBモジュールは、MIB 2伝送下MIBツリーに位置しています。
This section outlines the relationship of this MIB module with other MIB modules described in RFCs. Specifically, the IF-MIB, as presented in RFC 2863 [RFC2863], is discussed.
このセクションでは、RFCで説明した他のMIBモジュールと、このMIBモジュールの関係を概説します。具体的には、IF-MIB、RFC 2863に提示される[RFC2863]は、議論されています。
The HDSL2/SHDSL line MIB specifies the detailed attributes of a data interface. As such, it needs to integrate with RFC 2863 [RFC2863]. The IANA has assigned the following ifTypes to HDSL2 and SHDSL:
HDSL2 / SHDSLラインMIBは、データ・インターフェースの詳細な属性を指定します。このように、それは、RFC 2863 [RFC2863]と統合する必要があります。 IANAはHDSL2とSHDSLに次のifTypesを割り当てています：
IANAifType ::= TEXTUAL-CONVENTION
...
SYNTAX INTEGER {
...
hdsl2 (168), -- High Bit-Rate DSL, 2nd generation
shdsl (169), -- Multirate HDSL2
...
}
Note that the ifFixedLengthGroup from RFC 2863 [RFC2863] MUST be supported and that the ifRcvAddressGroup does not apply to this MIB module.
RFC 2863 [RFC2863]からifFixedLengthGroupをサポートしなければならないことに注意してくださいとifRcvAddressGroupこのMIBモジュールには適用されないこと。
The MIB branch identified by this ifType contains tables appropriate for this interface type. Most such tables extend the ifEntry table and are indexed by ifIndex. For interfaces in systems implementing this MIB module, those table entries indexed by ifIndex MUST be persistent.
このifTypeので識別されるMIBブランチは、このインターフェイスタイプに適したテーブルが含まれています。ほとんどのようなテーブルはifEntryのテーブルを拡張し、ifIndexによってインデックス付けされています。このMIBモジュールを実装するシステムのインターフェイスのために、ifIndexによってインデックスされるものテーブルエントリは永続的でなければなりません。
The following attributes are part of the mandatory ifGeneralInformationGroup in RFC 2863 [RFC2863] and are not duplicated in the HDSL2/SHDSL line MIB.
次の属性は、RFC 2863 [RFC2863]で必須ifGeneralInformationGroupの一部であり、HDSL2 / SHDSLラインMIBに重複しません。
===================================================================
ifIndex Interface index.
ifIndexのインターフェイスインデックス。
ifDescr See interfaces MIB [RFC2863].
ifDescrはインタフェースMIB [RFC2863]を参照されたいです。
ifType hdsl2(168) or shdsl(169).
ifTypeのHDSL2（168）またはSHDSL（169）。
ifSpeed Set as appropriate. (This is fixed at 1552000 for HDSL2 lines)
適切に設定のifSpeed。 （これはHDSL2ライン用1552000に固定されています）
ifPhysAddress This object MUST have an octet string with zero length.
ますifPhysAddressこのオブジェクトはゼロ長さのオクテット文字列を持たなければなりません。
ifAdminStatus See interfaces MIB [RFC2863].
ifAdminStatusは、インターフェイスMIB [RFC2863]を参照されたいです。
ifOperStatus See interfaces MIB [RFC2863].
ifOperStatusはインタフェースMIB [RFC2863]を参照されたいです。
ifLastChange See interfaces MIB [RFC2863].
インターフェイスMIB [RFC2863]を参照ifLastChange。
ifName See interfaces MIB [RFC2863].
ifNameはインターフェイスMIB [RFC2863]を参照されたいです。
ifAlias See interfaces MIB [RFC2863].
ifAliasは、interfacesアメーバ[RFC2863]を参照されたいです。
ifLinkUpDownTrapEnable Default to enabled(1).
有効にするには、ifLinkUpDownTrapEnableデフォルト（1）。
ifHighSpeed Set as appropriate. (For HDSL2 lines, this is fixed at 2)
必要に応じて設定しますifHighSpeed。 （HDSL2ラインの場合、これは2に固定されています）
ifConnectorPresent Set as appropriate.
適切に設定ifConnectorPresent。
===================================================================
Figure 1: Use of ifTable Objects
The HDSL2-SHDSL-LINE-MIB module requires the allocation of a single object identifier for its MODULE-IDENTITY. The IANA has allocated this object identifier in the transmission subtree (48), defined in the SNMPv2-SMI MIB module.
HDSL2-SHDSL-LINE-MIBモジュールは、MODULE-IDENTITYのための単一のオブジェクト識別子の割り当てを必要とします。 IANAは、SNMPv2の-SMI MIBモジュールで定義され、送信サブツリー（48）は、このオブジェクト識別子を割り当てました。
The assignment was in fact done when RFC 3276 was published, and this revision of the RFC does not require any new action from IANA.
RFC 3276が発行された時に割り当てが実際に行われた、およびRFCのこの改正は、IANAからの新しいアクションを必要としません。
A. xtuC refers to a central site terminal unit;
H2TU-C for HDSL2, or STU-C for SHDSL.
B. xtuR refers to a remote site terminal unit;
H2TU-R for HDSL2, or STU-R for SHDSL.
C. xtu refers to a terminal unit; either an xtuC or xtuR.
D. xru refer to a regenerator unit;
H2RU for HDSL2, or SRU for SHDSL.
E. xU refers to any HDSL2/SHDSL unit; either an xtu or xru.
F. CRC is Cyclic Redundancy Check [G.991.2].
G. ES means Errored Second [G.991.2].
J. LOSW means Loss of Sync Word [G.991.2].
I. LOSWS means LOSW Seconds [G.991.2].
J. SES means Severely Errored Second [G.991.2].
K. SNR means Signal-to-Noise Ratio [G.991.2].
L. UAS means Unavailable Second [G.991.2].
The following textual conventions are defined to reflect the line topology in the MIB module (further discussed in the following section) and to define the behavior of the statistics to be maintained by an agent.
次のテキストの表記法は、（さらに以下のセクションで説明）MIBモジュールのライントポロジーを反映するために、エージェントによって維持される統計の挙動を定義するために定義されています。
o Hdsl2ShdslUnitId:
またはHdsl2ShdslUnitId：
Attributes with this syntax uniquely identify each unit in an HDSL2/SHDSL span. It mirrors the EOC addressing mechanism:
この構文で属性一意HDSL2 / SHDSLスパン内の各ユニットを識別する。これは、EOCのアドレッシングメカニズムを反映します：
xtuC(1) - central office (CO) terminal unit xtuR(2) - customer premises equipment (CPE) terminal unit xru1(3) .. xru8(10) - regenerators, numbered from central office side
xtuC（1） - セントラルオフィス（CO）端末装置xtuR（2） - 顧客宅内機器（CPE）端末装置xru1（3）.. xru8（10） - 再生器は、中央局側から数え
o Hdsl2ShdslUnitSide:
お Ｈｄｓｌ２Ｓｈｄｓぅにつぃで：
Attributes with this syntax reference the two sides of a unit:
ユニットの双方は、この構文を参照して属性：
networkSide(1) - N in figure 2, below customerSide(2) - C in figure 2, below
以下の図2におけるC、 - N図2において、customerSide下記（2） - （1）networkSide
o Hdsl2ShdslWirePair:
Hdsl2ShdslWirePair O：
Attributes with this syntax reference the wire pairs connecting the units:
ユニットを接続するワイヤ対は、この構文を参照して属性：
wirePair1(1) - First pair for HDSL2/SHDSL. wirePair2(2) - Optional second pair for SHDSL only. wirePair3(3) - Optional third pair for SHDSL.bis only. wirePair4(4) - Optional fourth pair for SHDSL.bis only.
wirePair1（1） - HDSL2 / SHDSLための第一の対。 wirePair2（2） - のみSHDSLための任意の第二の対。 wirePair3（3） - のみSHDSL.bisのオプションの第3の対。 wirePair4（4） - のみSHDSL.bisのオプション第ペア。
o Hdsl2ShdslTransmissionModeType:
Hdsl2ShdslTransmissionModeType O：
Attributes with this syntax specify the regional setting for an SHDSL line. Specified as a BITS construct, the two mode types are:
この構文を持つ属性は、SHDSLラインのための地域の設定を指定します。 BITSの構築物として指定され、2モードの種類は次のとおりです。
region1 - ITU-T G.991.2 Annex A region2 - ITU-T G.991.2 Annex B
領域1 - ITU-T G.991.2はregion2にアネックス - ITU-T G.991.2アネックスB
o Hdsl2ShdslPerfCurrDayCount:
Hdsl2ShdslPerfCurrDayCount O：
Attributes with this syntax define the behavior of the 1-day (24 hour) gauges found in the MIB module.
MIBモジュールに見出さこの構文1日（24時間）の動作を定義ゲージと属性。
o Hdsl2Shdsl1DayIntervalCount:
Hdsl2Shdsl1DayIntervalCount O：
Attributes with this syntax define the behavior of the 1-day (24 hour) interval counters found in the MIB module.
この構文を持つ属性は、MIBモジュールで見つかった1日（24時間）間隔カウンタの動作を定義します。
o Hdsl2ShdslPerfTimeElapsed:
O Hdsl2ShdslPerfTimeElapsed：
Attributes with this syntax define the behavior of the elapsed time counters found in the MIB module.
この構文を持つ属性は、MIBモジュールで見つかった経過時間カウンタの動作を定義します。
o Hdsl2ShdslPerfIntervalThreshold:
Hdsl2ShdslPerfIntervalThreshold O：
Attributes with this syntax define the behavior of the alarm thresholds found in the MIB module.
この構文を持つ属性は、MIBモジュールで見つかったアラームしきい値の動作を定義します。
o Hdsl2ShdslClockReferenceType:
Hdsl2ShdslClockReferenceType O：
Attributes with this syntax define the clock references for the HDSL2/SHDSL span.
この構文を持つ属性は、HDSL2 / SHDSLスパンのためのクロック基準を定義します。
The MIB module is structured into the following MIB groups:
MIBモジュールは、次のMIBグループに構成されています。
o Span Configuration Group:
スパン設定グループO：
This group supports MIB objects for configuring parameters for the HDSL2/SHDSL span. It contains the following table:
このグループは、HDSL2 / SHDSLスパンのためのパラメータを設定するためのMIBオブジェクトをサポートしています。それは、次の表が含まれています。
- hdsl2ShdslSpanConfTable
- hdsl2ShdslSpanConfTable
o Span Status Group:
スパンステータスグループO：
This group supports MIB objects for retrieving span status information. It contains the following table:
このグループには、スパンのステータス情報を取得するためのMIBオブジェクトをサポートしています。それは、次の表が含まれています。
- hdsl2ShdslSpanStatusTable
- hdsl2ShdslSpanStatusTable
o Unit Inventory Group:
Oユニットインベントリグループ：
This group supports MIB objects for retrieving unit inventory information about units in HDSL2/SHDSL lines via the EOC. It contains the following table:
このグループは、EOCを介しHDSL2 / SHDSLラインにユニットについてユニットインベントリ情報を取得するためのMIBオブジェクトをサポートします。それは、次の表が含まれています。
- hdsl2ShdslInventoryTable
- hdsl2ShdslInventoryTable
o Segment Endpoint Configuration Group:
Oセグメントエンドポイントの設定グループ：
This group supports MIB objects for configuring parameters for the HDSL2/SHDSL segment endpoints. It contains the following table:
このグループは、HDSL2 / SHDSLセグメントエンドポイントのパラメータを設定するためのMIBオブジェクトをサポートしています。それは、次の表が含まれています。
- hdsl2ShdslEndpointConfTable
- hdsl2ShdslEndpointConfTable
o Segment Endpoint Current Status/Performance Group:
Oセグメントエンドポイントの現在の状態/パフォーマンスグループ：
This group supports MIB objects that provide the current status/ performance information relating to segment endpoints. It contains the following table:
このグループは、セグメントの端点に関連する現在の状態/パフォーマンス情報を提供するMIBオブジェクトをサポートします。それは、次の表が含まれています。
- hdsl2ShdslEndpointCurrTable
- hdsl2ShdslEndpointCurrTable
o Segment Endpoint 15-Minute Interval Status/Performance Group:
Oセグメントエンドポイントの15分間隔のステータス/パフォーマンスグループ：
This group supports MIB objects that provide historic status/ performance information relating to segment endpoints in 15-minute intervals. It contains the following table:
このグループは、15分間隔でセグメントのエンドポイントに関連する歴史的な状態/性能情報を提供するMIBオブジェクトをサポートしています。それは、次の表が含まれています。
- hdsl2Shdsl15MinIntervalTable
- hdsl2Shdsl15MinIntervalTable
o Segment Endpoint 1-Day Interval Status/Performance Group:
Oセグメントエンドポイント1-日間隔ステータス/パフォーマンスグループ：
This group supports MIB objects that provide historic status/ performance information relating to segment endpoints in 1-day intervals. It contains the following table:
このグループは1日間隔でセグメントのエンドポイントに関連する歴史的な状態/性能情報を提供するMIBオブジェクトをサポートしています。それは、次の表が含まれています。
- hdsl2Shdsl1DayIntervalTable
- hdsl2Shdsl1DayIntervalTable
o Maintenance Group:
メンテナンスグループO：
This group supports MIB objects for performing maintenance operations such as loopbacks for HDSL2/SHDSL lines. It contains the following table(s):
このグループは、HDSL2 / SHDSL回線用のループバックなどのメンテナンス作業を行うためのMIBオブジェクトをサポートします。これは、次の表（複数可）を含んでいます。
- hdsl2ShdslEndpointMaintTable - hdsl2ShdslUnitMaintTable
- hdsl2ShdslEndpointMaintTable - hdsl2ShdslUnitMaintTable
o Span Configuration Profile Group:
Oスパン構成プロファイルのグループ：
This group supports MIB objects for defining configuration profiles for HDSL2/SHDSL spans. It contains the following table:
このグループは、HDSL2 / SHDSLのスパンのための構成プロファイルを定義するためのMIBオブジェクトをサポートしています。それは、次の表が含まれています。
- hdsl2ShdslSpanConfProfileTable
- hdsl2ShdslSpanConfProfileTable
o Segment Endpoint Alarm Configuration Profile Group:
Oセグメントエンドポイントのアラーム設定プロファイルグループ：
This group supports MIB objects for defining alarm configuration profiles for HDSL2/SHDSL segment endpoints. It contains the following table:
このグループは、HDSL2 / SHDSLセグメントエンドポイントのアラーム構成プロファイルを定義するためのMIBオブジェクトをサポートしています。それは、次の表が含まれています。
- hdsl2ShdslEndpointAlarmConfProfileTable
- hdsl2ShdslEndpointAlarmConfProfileTable
o Notifications Group:
通知グループO：
This group defines the notifications supported for HDSL2/SHDSL lines:
このグループは、HDSL2 / SHDSLラインに対してサポートの通知を定義します。
- hdsl2ShdslLoopAttenCrossing
- hdsl2ShdslSNRMarginCrossing
- hdsl2ShdslPerfESThresh
- hdsl2ShdslPerfSESThresh
- hdsl2ShdslPerfCRCanomaliesThresh
- hdsl2ShdslPerfLOSWSThresh
- hdsl2ShdslPerfUASThresh
- hdsl2ShdslSpanInvalidNumRepeaters
- hdsl2ShdslLoopbackFailure
- hdsl2ShdslpowerBackoff
- hdsl2ShdsldeviceFault
- hdsl2ShdsldcContinuityFault - hdsl2ShdslconfigInitFailure - hdsl2ShdslprotocolInitFailure - hdsl2ShdslnoNeighborPresent - hdsl2ShdslLocalPowerLoss
- hdsl2ShdsldcContinuityFault - hdsl2ShdslconfigInitFailure - hdsl2ShdslprotocolInitFailure - hdsl2ShdslnoNeighborPresent - hdsl2ShdslLocalPowerLoss
o SHDSL Wire Pair Group:
SHDSLワイヤーペアグループO：
This group supports MIB objects that provide status of the SHDSL-specific wire pairs.
このグループは、SHDSL固有のワイヤ・ペアの状況を提供するMIBオブジェクトをサポートしています。
- hdsl2ShdslEndpointCurrTipRingReversal
- hdsl2ShdslEndpointCurrActivationState
o Payload Group:
ペイロードグループO：
This group supports MIB objects for retrieving payload rates that exclude any framing overhead.
このグループには、任意のフレーミングオーバーヘッドを除外ペイロード・レートを取得するためのMIBオブジェクトをサポートしています。
- hdsl2ShdslStatusMaxAttainablePayloadRate
- hdsl2ShdslStatusActualPayloadRate
An HDSL2/SHDSL line consists of a minimum of two units: xtuC (the central termination unit) and an xtuR (the remote termination unit). The line may optionally support up to 8 repeater/regenerator units (xru) as shown in the figure below.
xtuC（中央終端装置）とxtuR（遠隔終端装置）：HDSL2 / SHDSLラインは、二つのユニットの最小値から成ります。ラインは、以下の図8に示すように、中継器/再生器ユニット（XRU）へのサポートをいてもよいです。
<-- Network Side Customer Side -->
< - ネットワーク側の顧客側 - >
|</////////////////// HDSL2/SHDSL Span ////////////////////>|
| </////////////////// HDSL2 / SHDSLスパン////////////////////> |
<~~~> <~~~> HDSL2/SHDSL Segments <~~~>
+-------+ +-------+ +-------+ +-------+ +-------+
+ C=1=N C=1=N C=..1..=N C=1=N +
| xtuC | | xru1 | | xru2 | | xru8 | | xtuR |
+ C=2=N C=2=N C=..2..=N C=2=N +
+-------+ +-------+ +-------+ +-------+ +-------+
Key: <////> HDSL2/SHDSL span
<~~~~> HDSL2/SHDSL segment
=1= HDSL2/SHDSL wire-pair-1
=2= SHDSL optional wire-pair-2 (Not applicable to HDSL2)
C Customer side segment endpoint (modem)
N Network side segment endpoint (modem)
Figure 2: General Topology for an HDSL2/SHDSL Line
図2：HDSL2 / SHDSLラインのための一般的なトポロジ
For SNR Margin, Loop Attenuation, ES, SES, CRC anomalies, LOSW, and UAS, there are event counters, current 15-minute and 0 to 96 15- minute history bucket(s) of "interval-counters", as well as current and 0 to 30 previous 1-day interval-counter(s). Each current 15- minute event bucket has an associated threshold notification.
SNRマージン、ループ減衰、ES、SES、CRC異常、LOSW、およびUASため、イベントカウンタ、現在の15分と「インターバルカウンタ」の0分15〜96に履歴バケット（複数可）、ならびに存在します電流および0〜30前の1日間隔カウンタ（S）。各電流15-分のイベントのバケットは、関連するしきい値通知を持っています。
Unlike RFC 3593 [RFC3593] and RFC 2662 [RFC2662], there is no representation in the MIB module for invalid buckets. In those cases where the data for an interval is suspect or known to be invalid, the agent MUST NOT report the interval. If the current 15-minute event bucket is determined to be invalid, notifications based upon the value of the event bucket MUST NOT be generated.
RFC 3593 [RFC3593]及びRFC 2662 [RFC2662]とは異なり、無効バケットのMIBモジュールには表現されていません。間隔のデータが疑わしいまたは無効であることが知られているような場合、エージェントは間隔を報告してはなりません。現在の15分のイベントのバケットが無効であると判断された場合、イベントのバケットの値に基づいて通知が生成されてはなりません。
Not reporting an interval will result in holes in the associated table. For example, the table hdsl2Shdsl15MinIntervalTable is indexed by { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, hdsl2ShdslEndpointWirePair, hdsl2Shdsl15MinIntervalNumber}. If interval 12 is determined to be invalid but intervals 11 and 13 are valid, a Get Next operation on the indices .1.1.1.1.11 would return indices .1.1.1.1.13.
間隔は関連するテーブルの穴につながる報告していません。例えば、テーブルhdsl2Shdsl15MinIntervalTableは{ifIndexの、hdsl2ShdslInvIndex、hdsl2ShdslEndpointSide、hdsl2ShdslEndpointWirePair、hdsl2Shdsl15MinIntervalNumber}によってインデックス付けされます。間隔12は無効であると判断されたが、間隔11と13が有効である場合は、インデックスに次の操作をゲット.1.1.1.1.11インデックスを返します.1.1.1.1.13。
There is no requirement for an agent to ensure a fixed relationship between the start of a 15-minute interval and any wall clock; however, some implementations may align the 15-minute intervals with quarter hours. Likewise, an implementation may choose to align 1-day intervals with the start of a day.
15分間隔の開始及び任意ウォールクロックとの間の一定の関係を確保するために、エージェントのための必要はありません。しかし、いくつかの実装は、四半期の時間を15分間隔を揃えることがあります。同様に、実装は、一日の始まりに1日間隔を整列させることもできます。
Counters are not reset when an xU is reinitialized, only when the agent is reset or reinitialized (or under specific request outside the scope of this MIB module).
徐は、エージェントがリセットまたは再初期化（または、このMIBモジュールの範囲外の特定の要求の下で）である場合にのみ、再初期化されるとき、カウンタはリセットされません。
As a managed node can handle a large number of xUs (e.g., hundreds or perhaps thousands of lines), provisioning every parameter on every xU may become burdensome. Moreover, most lines are provisioned identically with the same set of parameters. To simplify the provisioning process, this MIB module makes use of profiles. A profile is a set of parameters that can be shared by multiple lines using the same configuration.
管理対象ノードは、XUSの多数を扱うことができるように（例えば、おそらく数百または数千行）は、すべてのXU上のすべてのパラメータをプロビジョニングすることは負担になることができます。また、ほとんどの行は、パラメータの同じセットと同じプロビジョニングされます。プロビジョニング・プロセスを簡略化するために、このMIBモジュールは、プロファイルを使用しています。プロファイルは、同じ構成を使用して複数行で共有することができるパラメータのセットです。
The following profiles are used in this MIB module:
次のプロファイルは、このMIBモジュールで使用されます。
o Span Configuration Profiles - Span configuration profiles contain parameters for configuring HDSL2/SHDSL spans. They are defined in the hdsl2ShdslSpanConfProfileTable. Since span configuration parameters are only applicable for SHDSL, the support for span configuration profiles is optional for HDSL2 interfaces.
Oスパン構成プロファイル - スパン構成プロファイルはHDSL2 / SHDSLのスパンを設定するためのパラメータが含まれています。これらはhdsl2ShdslSpanConfProfileTableで定義されています。スパン設定パラメータは、SHDSLにのみ適用されているので、スパン構成プロファイルのサポートはHDSL2インターフェイスのオプションです。
Note that the configuration of the span dictates the behavior for each individual segment endpoint in the span. If a different configuration is provisioned for any given segment endpoint within the span, the new configuration for this segment endpoint will override the span configuration for this segment endpoint only.
スパンの構成は、スパン内の個々のセグメントのエンドポイントの動作を指示することに留意されたいです。異なる構成は、スパン内の任意の所与のセグメントのエンドポイントにプロビジョニングされている場合、このセグメントのエンドポイントの新しい設定は、このセグメントのエンドポイントのスパン設定を上書きします。
o Segment Endpoint Alarm Configuration Profiles - These profiles contain parameters for configuring alarm thresholds for HDSL2/ SHDSL segment endpoints. These profiles are defined in the hdsl2ShdslEndpointAlarmConfProfileTable.
Oセグメントエンドポイントのアラーム構成プロファイル - これらのプロファイルは、HDSL2 / SHDSLセグメントエンドポイントのアラームしきい値を設定するためのパラメータが含まれています。これらのプロファイルはhdsl2ShdslEndpointAlarmConfProfileTableで定義されています。
The index value for this profile is a locally-unique administratively-assigned name for the profile having the textual convention 'SnmpAdminString' (RFC 3411 [RFC3411]).
このプロファイルのインデックス値は、テキストの表記法「れるSnmpAdminString」（RFC 3411 [RFC3411]）を有するプロファイルのローカルで一意に管理割り当てられた名前です。
One or more lines may be configured to share parameters of a single profile (e.g., hdsl2ShdslEndpointAlarmConfProfile = 'silver') by setting its hdsl2ShdslEndpointAlarmConfProfile objects to the value of this profile. If a change is made to the profile, all lines that refer to it will be reconfigured to the changed parameters. Before a profile can be deleted or taken out of service, it must be first unreferenced from all associated lines.
一つ以上のラインがこのプロファイルの値にそのhdsl2ShdslEndpointAlarmConfProfileオブジェクトを設定することにより、単一のプロファイル（例えば、hdsl2ShdslEndpointAlarmConfProfile =「銀」）のパラメータを共有するように構成することができます。変更がプロファイルに行われた場合、それを参照するすべての行が変更されたパラメータに再設定されます。プロフィールが削除されたり、サービスから取り出すことができる前に、それはすべての関連する行から参照されていない最初でなければなりません。
Implementations MUST provide a default profile whose name is 'DEFVAL' for each profile type. The values of the associated parameters will be vendor specific unless otherwise indicated in this document. Before a line's profiles have been set, these profiles will be automatically used by setting hdsl2ShdslEndpointAlarmConfProfile and hdsl2ShdslSpanConfProfile to 'DEFVAL' where appropriate. This default profile name, 'DEFVAL', is considered reserved in the context of profiles defined in this MIB module.
実装は、名前の各プロファイルタイプの「DEFVAL」で、デフォルトのプロファイルを提供しなければなりません。そうでない場合は、この文書に示されない限り、関連するパラメータの値が特定のベンダーであろう。行のプロファイルが設定されている前に、これらのプロファイルは、自動的に適切な場合には「DEFVAL」にhdsl2ShdslEndpointAlarmConfProfileとhdsl2ShdslSpanConfProfileを設定することによって使用されます。このデフォルトのプロファイル名は、「DEFVAL」はこのMIBモジュールで定義されたプロファイルのコンテキストで予約みなされます。
Profiles are created, assigned, and deleted dynamically using the profile name and profile row status in each of the four profile tables.
プロファイルは、作成された割り当てられ、4つのプロファイルテーブルのそれぞれのプロファイル名とプロファイル行ステータスを使用して動的に削除されます。
Profile changes MUST take effect immediately. These changes MAY result in a restart (hard reset or soft restart) of the units on the line.
プロフィールの変更はすぐに反映しなければなりません。これらの変更は、ライン上のユニットの再起動（ハードリセットまたはソフト再起動）をもたらすことができます。
The ability to generate the SNMP notifications coldStart/warmStart (per [RFC3418]), which are per agent (e.g., per Digital Subscriber Line Access Multiplexer, or DSLAM, in such a device), and linkUp/ linkDown (per [RFC2863]), which are per interface (i.e., HDSL2/SHDSL line) is required.
（[RFC2863]あたり）、およびリンクアップ/リンクダウン（デジタル加入者線アクセスマルチプレクサ、またはそのようなデバイスにおけるDSLAMあたり例えば、）エージェントごとである（[RFC3418]あたり）SNMP通知せるcoldStart /ウォームスタートを生成する能力、 、インターフェイスごとである（すなわち、HDSL2 / SHDSLライン）が必要です。
A linkDown notification MAY be generated whenever any ES, SES, CRC anomaly, LOSW, or UAS event occurs. The corresponding linkUp notification MAY be sent when all link failure conditions are cleared.
任意ES、SES、CRC異常、LOSW、またはUASイベントが発生するたびにリンクダウン通知が生成されてもよいです。すべてのリンク障害条件がクリアされたときに、対応するリンクアップ通知が送信されるかもしれません。
The notifications defined in this MIB module are for initialization failure and for the threshold crossings associated with the following events: ES, SES, CRC anomaly, LOSW, and UAS. Each threshold has its own enable/threshold value. When that value is 0, the notification is disabled.
ES、SES、CRC異常、LOSW、およびUAS：このMIBモジュールで定義された通知は、初期化の失敗のために、次のイベントに関連付けられた閾値交差のためのものです。各しきい値は、独自の有効/しきい値を持ちます。その値が0である場合は、通知が無効になっています。
The hdsl2ShdslEndpointCurrStatus is a bitmask representing all outstanding error conditions associated with a particular segment endpoint. Note that since the status of remote endpoints is obtained via the EOC, this information may be unavailable for units that are unreachable via EOC during a line error condition. Therefore, not all conditions may always be included in its current status. Notifications corresponding to the bit fields in this object are defined.
hdsl2ShdslEndpointCurrStatusは、特定のセグメントのエンドポイントに関連付けられたすべての未処理のエラー状態を表すビットマスクです。リモートエンドポイントのステータスがEOCを介して得られるので、この情報は、ラインエラー状態の間EOCを介して到達不能であるユニットに対して利用不可能であってもよいことに留意されたいです。そのため、すべての条件は、常に現在のステータスに含まれていてもよいではありません。このオブジェクトのビット・フィールドに対応する通知が定義されています。
Two alarm conditions, SNR Margin Alarm and Loop Attenuation Alarm, are organized in a manner slightly different from that implied in the EOC specifications. In the MIB module, these alarm conditions are tied to the two thresholds, hdsl2ShdslEndpointThreshSNRMargin and hdsl2ShdslEndpointThreshLoopAttenuation, found in the hdsl2ShdslEndpointAlarmConfProfileTable. In the EOC, the alarm conditions associated with these thresholds are per unit. In the MIB module, these alarm conditions are per endpoint. For terminal units, this has no impact. For repeaters, this implies an implementation variance where the agent in the terminal unit is responsible for detecting a threshold crossing. As the reporting of a repeater detected alarm condition to the polling terminal unit occurs in the same EOC message as the reporting of the current SNR Margin and Loop Attenuation values, it is anticipated that this will have very little impact on agent implementation.
2つのアラーム条件、SNRマージンのアラームとループ減衰アラームは、EOC仕様で暗黙のものとは若干異なる方法で編成されています。 MIBモジュールでは、これらのアラーム条件がhdsl2ShdslEndpointAlarmConfProfileTableで見つかった二つの閾値、hdsl2ShdslEndpointThreshSNRMarginとhdsl2ShdslEndpointThreshLoopAttenuationに結びついています。 EOCでは、これらの閾値に関連したアラーム状態は単位あたりの金額です。 MIBモジュールでは、これらのアラーム状態は、エンドポイントごとにあります。端末装置の場合、これは影響を及ぼしません。中継器の場合、これは、端末装置のエージェントがしきい値交差を検出するための責任がある実装分散を意味しています。ポーリング端末装置は、現在のSNRマージンおよびループ減衰値の報告と同じEOCメッセージで発生するリピータの報告がアラーム状態を検出したとして、エージェントの実装にほとんど影響を与えることが予想されます。
A threshold notification occurs whenever the corresponding current 15-minute interval error counter becomes equal to, or exceeds, the threshold value. Only one notification SHOULD be sent per interval per interface. Since the current 15-minute counter is reset to 0 every 15 minutes, and if the condition persists, the notification may recur as often as every 15 minutes. For example, to get a notification whenever a "loss of" event occurs (but at most once every 15 minutes), set the corresponding threshold to 1. The agent will generate a notification when the event originally occurs.
しきい値通知は、対応する現在の15分間隔のエラーカウンタが等しくなるたびに発生し、または、閾値を超えます。一つだけの通知は、インターフェイスごとの間隔ごとに送ってください。現在の15分カウンタが0 15分ごとにリセットされるので、状態が続く場合、および、通知の頻度15分ごととして再発することができます。イベント「の損失」が発生するたびたとえば、通知を得るために（ただし、最高1回15分ごと）、イベントが最初に発生したときに通知を生成します。1.エージェントに対応する閾値を設定します。
Notifications, other than the threshold notifications listed above, SHOULD be rate limited (throttled) such that there is at least a 1-minute gap between the generation of consecutive notifications of the same event. When notifications are rate limited, they are dropped and not queued for sending at a future time. This is intended to be a general rate-limiting statement for notifications that have no explicit rate-limiting assertions in this document otherwise.
上記閾値の通知以外の通知は、同じイベントの連続的な通知の生成の間に1分間の間隙が少なくとも存在するような速度限定（絞り）であるべきです。通知はレートが制限されている場合は、彼らが低下し、将来の時点で送信するためにキューイングされていません。これは、そうでない場合は、この文書で明示的な律速アサーションを持っていないの通知のための一般的な速度制限の文であることを意図しています。
Note that the Network Management System, or NMS, may receive a linkDown notification as well, if enabled (via ifLinkUpDownTrapEnable [RFC2863]). At the beginning of the next 15-minute interval, the counter is reset. When the first second goes by and the event occurs, the current interval bucket will be 1, which equals the threshold, and the notification will be sent again.
有効な場合、ネットワーク管理システム、又はNMSは、（は、ifLinkUpDownTrapEnable [RFC2863]を介して）、同様にリンクダウン通知を受信してもよいことに留意されたいです。次の15分間隔の開始時に、カウンタがリセットされます。第一、第二が経つと、イベントが発生した場合、現在の間隔のバケットが閾値に等しく、通知が再度送信される、1であろう。
An hdsl2ShdslSpanInvalidNumRepeaters notification may be generated following completion of the discovery phase if the number of repeaters discovered on the line differs from the number of repeaters specified in hdsl2ShdslSpanConfNumRepeaters. For those conditions where the number of provisioned repeaters is greater than those encountered during span discovery, all table entries associated with the nonexistent repeaters are to be discarded. For those conditions where the number of provisioned repeaters is less than those encountered during span discovery, additional table entries are to be created using the default span configuration profile.
ライン上で発見された中継器の数がhdsl2ShdslSpanConfNumRepeatersで指定された中継器の数が異なる場合hdsl2ShdslSpanInvalidNumRepeaters通知が発見段階の完了後に生成されてもよいです。プロビジョニングされたリピーターの数は、スパン発見中に発生したものよりも大きいこれらの条件については、存在しないリピーターに関連するすべてのテーブルエントリが破棄されることになります。プロビジョニングされたリピーターの数は、スパン発見中に発生したものより少ないこれらの条件については、追加のテーブルエントリは、デフォルトのスパン構成プロファイルを使用して作成されます。
HDSL2-SHDSL-LINE-MIB DEFINITIONS ::= BEGIN
IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32, Gauge32, NOTIFICATION-TYPE, Integer32, transmission FROM SNMPv2-SMI RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC ifIndex FROM IF-MIB PerfCurrentCount, PerfIntervalCount FROM PerfHist-TC-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF;
PerfHist-TC-MIBれるSnmpAdminStringからのIF-MIB PerfCurrentCount、PerfIntervalCountからの輸入MODULE-IDENTITY、OBJECT-TYPE、Counter32の、Unsigned32の、Gauge32、NOTIFICATION-TYPE、Integer32の、SNMPv2の-SMI RowStatus標準からの送信、のSNMPv2-TCのifIndex FROMテキストの表記法SNMP-FRAMEWORK-MIBのMODULE-COMPLIANCE、オブジェクト・グループ、SNMPv2の-CONFからの通知-groupから。
hdsl2ShdslMIB MODULE-IDENTITY LAST-UPDATED "200512070000Z" -- December 7, 2005 ORGANIZATION "ADSLMIB Working Group" CONTACT-INFO "WG-email: adslmib@ietf.org WG-URL: http://www.ietf.org/html.charters/adslmib-charter.html Info: https://www1.ietf.org/mailman/listinfo/adslmib Chair: Mike Sneed Sand Channel Systems Postal: 1210-203 Westview Ln Raleigh NC 27605 USA Email: sneedmike@hotmail.com Phone: +1 206 600 7022
hdsl2ShdslMIBのMODULE-IDENTITY LAST-UPDATED "200512070000Z" - 2005年12月7日ORGANIZATION "ADSLMIBワーキンググループ" CONTACT-INFO「WG-メール：adslmib@ietf.org WG-URL：http://www.ietf.org/html .charters / adslmib-charter.html情報：https://www1.ietf.org/mailman/listinfo/adslmib座長：マイク・Sneed砂チャンネルシステム郵便：1210から203ウェストビューのLnローリーNC 27605 USA Eメール：sneedmike@hotmail.com電話：+1 206 600 7022
Co-Chair Bob Ray
PESA Switching Systems, Inc.
Postal 330-A Wynn Drive Huntsville, AL 35805 USA Phone +1 256 726 9200 ext. 142
郵便330-ウィンドライブハンツビル、AL 35805 USA電話+1 256 726 9200内線。 142
Co-editor: Clay Sikes Zhone Technologies, Inc. Postal: 8545 126th Ave. N. Largo, FL 33772 USA Email: csikes@zhone.com Phone: +1 727 530 8257
共同編集者：クレイSikes Zhone Technologies社郵便：8545第126回アベニュー。 N.ラルゴ、FL 33772 USA Eメール：csikes@zhone.com電話：+1 727 530 8257
Co-editor: Bob Ray PESA Switching Systems, Inc. Postal: 330-A Wynn Drive Huntsville, AL 35805 USA Email: rray@pesa.com Phone: +1 256 726 9200 ext. 142
共同編集者：ボブ・レイPESAシステムを切り替え、Inc.の郵便：330-ウィンドライブハンツビル、AL 35805 USA Eメール：rray@pesa.com電話：+1 256 726 9200内線。 142
Co-editor: Rajesh Abbi Alcatel USA Postal: 2301 Sugar Bush Road Raleigh, NC 27612-3339 USA
共同編集者：ラジェッシュアビーアルカテルUSA郵便：2301シュガーブッシュ道路ローリー、ノースカロライナ州27612から3339 USA
Email: Rajesh.Abbi@alcatel.com Phone: +1 919 850 6194"
メール：Rajesh.Abbi@alcatel.com電話：+1 919 850 6194"
DESCRIPTION "This MIB module defines a collection of objects for managing HDSL2/SHDSL lines. An agent may reside at either end of the line; however, the MIB module is designed to require no management communication between the modems beyond that inherent in the low-level EOC line protocol as defined in ANSI T1E1.4/2000-006 (for HDSL2 lines) or in ITU G.991.2 (for SHDSL lines).
DESCRIPTION「このMIBモジュールはHDSL2 / SHDSLラインを管理するオブジェクトのコレクションを定義剤は線の両端に存在することができる;しかし、MIBモジュールが低にその固有超えモデム間の管理通信を必要としないように設計されていますITU G.991.2 ANSI T1E1.4 / 2000から006（HDSL2ライン用）またはで定義されているレベルEOCラインプロトコル（SHDSLライン用）。
Copyright (C) The Internet Society (2005). This version of
this MIB module is part of RFC 4319; see the RFC itself for
full legal notices."
REVISION "200512070000Z" -- December 7, 2005 DESCRIPTION "This version, published as RFC 4319. The following changes have been made in this version: 1. Added a 3rd and 4th wire pair. 2. Modified all rates such that their rates are only constrained by an unsigned 32-bit value and not by what today's perceived technology limitations are.
REVISION「200512070000Z」 - 2005年12月7日DESCRIPTION「このバージョンは、RFC 4319.として公開次の変更は、このバージョンでは行われています。1. 3番目と4番目のワイヤのペアを追加しました彼らの率があるような2.すべての変更率。唯一の符号なし32ビット値ではなく、今日の認知技術の限界が何であるかによって制約。
3. Clarified that the rates from RFC 3276 include
payload and any applicable framing and added
objects for payload-only rates.
4. Added an object to indicate whether the
tip and ring are reversed on a wire pair.
5. Added an object to display the activation state
of a wire pair.
6. Added references as necessary for clarification.
7. Added display hints to textual conventions as
necessary.
8. Updated conformance statements as necessary.
9. Some changes were due to IETF requirements and
RFC generation tools."
REVISION "200205090000Z" -- May 9, 2002 DESCRIPTION "Initial version, published as RFC 3276."
REVISION "200205090000Z" - 2002年5月9日DESCRIPTION "RFC 3276.として公開初期バージョン、"
::= { transmission 48 }
hdsl2ShdslMibObjects OBJECT IDENTIFIER ::= { hdsl2ShdslMIB 1 }
-- Textual Conventions used in this MIB module --
- このMIBモジュールで使用されるテキストの表記法 -
Hdsl2ShdslPerfCurrDayCount ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A gauge associated with interface performance measurements in
a current 1-day (24 hour) measurement interval.
The value of this gauge starts at zero at the beginning of an
interval and is increased when associated events occur, until
the end of the 1-day interval. At that time, the value of the
gauge is stored in the previous 1-day history interval, as
defined in a companion object of type
Hdsl2Shdsl1DayIntevalCount, and the current interval gauge
is restarted at zero.
In the case where the agent has no valid data available for this interval, the corresponding object instance is not available, and upon a retrieval request, a corresponding error message shall be returned to indicate that this instance does not exist. Please note that zero is a valid value." SYNTAX Gauge32
エージェントはこの間隔のために利用可能な有効なデータを持っていない場合には、対応するオブジェクトインスタンスが利用可能でない、検索要求に応じて、対応するエラーメッセージは、このインスタンスが存在しないことを示すために戻さなければなりません。ゼロは有効な値であることに注意してください。」構文Gauge32
Hdsl2Shdsl1DayIntervalCount ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current DESCRIPTION "A counter associated with interface performance measurements during the most previous 1-day (24 hour) measurement interval. The value of this gauge is equal to the value of the current day gauge, as defined in a companion object of type Hdsl2ShdslPerfCurrDayCount, at the end of its most recent interval.
ステータス現在の説明「最も前の1日（24時間）測定間隔の間にインターフェイス性能測定と関連するカウンタ。型Hdsl2ShdslPerfCurrDayCountのコンパニオン・オブジェクトで定義されたように、このゲージの値は、現在の日ゲージの値に等しいです。 、その最新の間隔の終わり。
In the case where the agent has no valid data available for this interval, the corresponding object instance is not available, and upon a retrieval request, a corresponding error message shall be returned to indicate that this instance does not exist." SYNTAX Gauge32
エージェントはこの間隔のために利用可能な有効なデータを持っていない場合には、対応するオブジェクトインスタンスが利用可能でない、検索要求に応じて、対応するエラーメッセージは、このインスタンスが存在しないことを示すために戻さなければならない。」構文Gauge32
Hdsl2ShdslPerfTimeElapsed ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as
an adjustment in the system's time-of-day clock or the addition
of a leap second, the current interval exceeds the maximum
value, the agent will return the maximum value.
For 15-minute intervals, the range is limited to (0..899). For 24-hour intervals, the range is limited to (0..86399)." SYNTAX Unsigned32(0..86399)
15分間隔で、範囲は（0..899）に制限されます。 24時間間隔で、範囲は（0..86399）。」構文Unsigned32（0..86399）に制限されます
Hdsl2ShdslPerfIntervalThreshold ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"This convention defines a range of values that may be set in
a fault threshold alarm control. As the number of seconds in
a 15-minute interval numbers at most 900, objects of this type
may have a range of 0...900, where the value of 0 disables the
alarm."
SYNTAX Unsigned32(0..900)
Hdsl2ShdslUnitId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is the unique identification for all units in an
HDSL2/SHDSL span. It is based on the EOC unit addressing
scheme with reference to the xtuC."
SYNTAX INTEGER
{
xtuC(1),
xtuR(2),
xru1(3),
xru2(4),
xru3(5),
xru4(6),
xru5(7),
xru6(8),
xru7(9),
xru8(10)
}
Hdsl2ShdslUnitSide ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is the referenced side of an HDSL2/SHDSL unit - Network
or Customer side. The side facing the Network is the Network
side, while the side facing the Customer is the Customer side."
SYNTAX INTEGER
{
networkSide(1),
customerSide(2)
}
Hdsl2ShdslWirePair ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is the referenced pair of wires in an HDSL2/SHDSL segment.
HDSL2 only supports a single pair (wirePair1 or two wire),
SHDSL lines support an optional second pair (wirePair2 or four
wire), and G.shdsl.bis support an optional third pair
(wirePair3 or six wire) and an optional fourth pair
(wirePair4 or eight wire)."
SYNTAX INTEGER
{
wirePair1(1), -- two wire
wirePair2(2), -- four wire
wirePair3(3), -- six wire
wirePair4(4) -- eight wire
}
Hdsl2ShdslTransmissionModeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Contains the regional setting of the HDSL2/SHDSL span,
represented as a bit-map of possible settings. The various
bit positions are as follows:
Bit Meaning Description 1 region 1 Indicates ITU-T G.991.2 Annex A. 2 region 2 Indicates ITU-T G.991.2 Annex B." SYNTAX BITS { region1(0), region2(1) }
説明1領域意味1ビットは、ITU-T G.991.2アネックスA. 2領域2は、ITU-T G.991.2アネックスB.」構文BITS {領域1（0）、region2に（1）}を示し示し
Hdsl2ShdslClockReferenceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The various STU-C symbol clock references for the
HDSL2/SHDSL span, represented as an enumeration."
SYNTAX INTEGER
{
localClk(1), -- Mode-1 per G991.2
networkClk(2), -- Mode-2 per G991.2
dataOrNetworkClk(3), -- Mode-3a per G991.2
dataClk(4) -- Mode-3b per G991.2
}
-- Span Configuration Group --
- スパン設定グループ -
hdsl2ShdslSpanConfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hdsl2ShdslSpanConfEntry MAX-ACCESS not-accessible STATUS current
Hdsl2ShdslSpanConfEntry MAX-ACCESSステータス電流のhdsl2ShdslSpanConfTable OBJECT-TYPE構文配列
DESCRIPTION
"This table supports overall configuration of HDSL2/SHDSL
spans. Entries in this table MUST be maintained in a
persistent manner."
::= { hdsl2ShdslMibObjects 1 }
hdsl2ShdslSpanConfEntry OBJECT-TYPE
SYNTAX Hdsl2ShdslSpanConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hdsl2ShdslSpanConfTable. Each entry
represents the complete span in a single HDSL2/SHDSL line.
It is indexed by the ifIndex of the associated HDSL2/SHDSL
line."
INDEX { ifIndex }
::= { hdsl2ShdslSpanConfTable 1 }
Hdsl2ShdslSpanConfEntry ::=
SEQUENCE
{
hdsl2ShdslSpanConfNumRepeaters Unsigned32,
hdsl2ShdslSpanConfProfile SnmpAdminString,
hdsl2ShdslSpanConfAlarmProfile SnmpAdminString
}
hdsl2ShdslSpanConfNumRepeaters OBJECT-TYPE
SYNTAX Unsigned32(0..8)
UNITS "repeaters"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object provisions the number of repeaters/regenerators
in this HDSL2/SHDSL span."
::= { hdsl2ShdslSpanConfEntry 1 }
hdsl2ShdslSpanConfProfile OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a pointer to a span configuration profile in the hdsl2ShdslSpanConfProfileTable, which applies to this span. The value of this object is the index of the referenced profile in the hdsl2ShdslSpanConfProfileTable. Note that span configuration profiles are only applicable to SHDSL lines.
hdsl2ShdslSpanConfProfile OBJECT-TYPE構文れるSnmpAdminString（SIZE（1..32））MAX-ACCESS読み取りと書き込みステータス現在の説明は「このオブジェクトは、このスパンに適用hdsl2ShdslSpanConfProfileTableにおけるスパン構成プロファイルへのポインタである。このオブジェクトの値hdsl2ShdslSpanConfProfileTableで参照されたプロファイルのインデックスである。そのスパン構成プロファイルは、SHDSLラインにのみ適用されます。
HDSL2 lines MUST reference the default profile, 'DEFVAL'.
By default, this object will have the value 'DEFVAL'
(the index of the default profile).
Any attempt to set this object to a value that is not the value
of the index for an active entry in the profile table,
hdsl2ShdslSpanConfProfileTable, MUST be rejected."
::= { hdsl2ShdslSpanConfEntry 2 }
hdsl2ShdslSpanConfAlarmProfile OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a pointer to an alarm configuration profile in the hdsl2ShdslEndpointAlarmConfProfileTable. The value of this object is the index of the referenced profile in the hdsl2ShdslEndpointAlarmConfProfileTable. The alarm threshold configuration in the referenced profile will be used by default for all segment endpoints in this span. Individual endpoints may override this profile by explicitly specifying some other profile in the hdsl2ShdslEndpointConfTable. By default, this object will have the value 'DEFVAL' (the index of the default profile).
hdsl2ShdslSpanConfAlarmProfile OBJECT-TYPE SYNTAXれるSnmpAdminString（SIZE（1..32））MAX-ACCESS読み取りと書き込みステータス現在の説明は「このオブジェクトはhdsl2ShdslEndpointAlarmConfProfileTableのアラーム構成プロファイルへのポインタである。このオブジェクトの値は、参照の指標でありますhdsl2ShdslEndpointAlarmConfProfileTableにプロファイル。参照プロファイルのアラームしきい値の設定は、このスパン内のすべてのセグメントのエンドポイント用にデフォルトで使用されます。個々のエンドポイントは、明示的にhdsl2ShdslEndpointConfTable内の他のプロファイルを指定することで、このプロファイルを無効にすることができる。デフォルトでは、このオブジェクトが持つことになります値「DEFVAL」（デフォルトのプロファイルのインデックス）。
Any attempt to set this object to a value that is not the value
of the index for an active entry in the profile table,
hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected."
::= { hdsl2ShdslSpanConfEntry 3 }
-- Span Status Group --
- スパンステータスグループ -
hdsl2ShdslSpanStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2ShdslSpanStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides overall status information of
HDSL2/SHDSL spans. This table contains live data from
equipment. As such, it is NOT persistent."
::= { hdsl2ShdslMibObjects 2 }
hdsl2ShdslSpanStatusEntry OBJECT-TYPE
SYNTAX Hdsl2ShdslSpanStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hdsl2ShdslSpanStatusTable. Each entry
represents the complete span in a single HDSL2/SHDSL line.
It is indexed by the ifIndex of the associated HDSL2/SHDSL
line."
INDEX { ifIndex }
::= { hdsl2ShdslSpanStatusTable 1 }
Hdsl2ShdslSpanStatusEntry ::=
SEQUENCE
{
hdsl2ShdslStatusNumAvailRepeaters Unsigned32,
hdsl2ShdslStatusMaxAttainableLineRate Unsigned32,
hdsl2ShdslStatusActualLineRate Unsigned32,
hdsl2ShdslStatusTransmissionModeCurrent
Hdsl2ShdslTransmissionModeType,
hdsl2ShdslStatusMaxAttainablePayloadRate Unsigned32,
hdsl2ShdslStatusActualPayloadRate Unsigned32
}
hdsl2ShdslStatusNumAvailRepeaters OBJECT-TYPE
SYNTAX Unsigned32(0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the actual number of repeaters/regenerators
discovered in this HDSL2/SHDSL span."
::= { hdsl2ShdslSpanStatusEntry 1 }
hdsl2ShdslStatusMaxAttainableLineRate OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the maximum attainable line rate in this HDSL2/SHDSL
span. This object provides the maximum rate the line is
capable of achieving. This is based upon measurements made
during line probing. This rate includes payload (user data)
and any applicable framing overhead."
::= { hdsl2ShdslSpanStatusEntry 2 }
hdsl2ShdslStatusActualLineRate OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the actual line rate in this HDSL2/SHDSL span. This
SHOULD equal ifSpeed. This rate includes payload (user data)
and any applicable framing overhead"
::= { hdsl2ShdslSpanStatusEntry 3 }
hdsl2ShdslStatusTransmissionModeCurrent OBJECT-TYPE
SYNTAX Hdsl2ShdslTransmissionModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the current Power Spectral Density (PSD) regional
setting of the HDSL2/SHDSL span."
::= { hdsl2ShdslSpanStatusEntry 4 }
hdsl2ShdslStatusMaxAttainablePayloadRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION
hdsl2ShdslStatusMaxAttainablePayloadRateのOBJECT-TYPE構文Unsigned32（0 4294967295）ユニットはMAX-ACCESS read-onlyステータス現在の説明の "bpsの"
"Contains the maximum attainable payload (user data)
line rate in this HDSL2/SHDSL span. This object provides
the maximum rate the line is capable of achieving. This
is based upon measurements made during line probing. Any
framing overhead is not included."
::= { hdsl2ShdslSpanStatusEntry 5 }
hdsl2ShdslStatusActualPayloadRate OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the actual line rate in this HDSL2/SHDSL span. Any
framing overhead is not included."
::= { hdsl2ShdslSpanStatusEntry 6 }
-- Unit Inventory Group --
- ユニットインベントリ・グループ -
hdsl2ShdslInventoryTable OBJECT-TYPE SYNTAX SEQUENCE OF Hdsl2ShdslInventoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table supports retrieval of unit inventory information available via the EOC from units in an HDSL2/SHDSL line.
Hdsl2ShdslInventoryEntry MAX-ACCESSステータス現在の説明のhdsl2ShdslInventoryTable OBJECT-TYPE構文配列は「この表HDSL2 / SHDSLラインにユニットからEOCを介して利用可能なユニットの在庫情報の検索をサポートします。
Entries in this table are dynamically created during the
line discovery process. The life cycle for these entries
is as follows:
- xtu discovers a device, either a far-end xtu or an xru - an inventory table entry is created for the device - the line goes down for whatever reason - inventory table entries for unreachable devices are destroyed
- XTUいずれかの遠端XTUまたはXRU、デバイスを発見 - 在庫テーブルエントリは、デバイスのために作成された - ラインが何らかの理由でダウン - 到達不能なデバイスのインベントリテーブルのエントリが破壊されています
As these entries are created/destroyed dynamically, they
are NOT persistent."
::= { hdsl2ShdslMibObjects 3 }
hdsl2ShdslInventoryEntry OBJECT-TYPE SYNTAX Hdsl2ShdslInventoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the hdsl2ShdslInventoryTable. Each entry
hdsl2ShdslInventoryEntryのOBJECT-TYPE SYNTAX Hdsl2ShdslInventoryEntry MAX-ACCESSステータス現在の説明「hdsl2ShdslInventoryTableのエントリ。各エントリ
represents inventory information for a single unit in an
HDSL2/SHDSL line. It is indexed by the ifIndex of the
HDSL2/SHDSL line and the Hdsl2ShdslUnitId of the
associated unit."
INDEX { ifIndex, hdsl2ShdslInvIndex }
::= { hdsl2ShdslInventoryTable 1 }
Hdsl2ShdslInventoryEntry ::=
SEQUENCE
{
hdsl2ShdslInvIndex Hdsl2ShdslUnitId,
hdsl2ShdslInvVendorID OCTET STRING,
hdsl2ShdslInvVendorModelNumber OCTET STRING,
hdsl2ShdslInvVendorSerialNumber OCTET STRING,
hdsl2ShdslInvVendorEOCSoftwareVersion Integer32,
hdsl2ShdslInvStandardVersion Integer32,
hdsl2ShdslInvVendorListNumber OCTET STRING,
hdsl2ShdslInvVendorIssueNumber OCTET STRING,
hdsl2ShdslInvVendorSoftwareVersion OCTET STRING,
hdsl2ShdslInvEquipmentCode OCTET STRING,
hdsl2ShdslInvVendorOther OCTET STRING,
hdsl2ShdslInvTransmissionModeCapability
Hdsl2ShdslTransmissionModeType
}
hdsl2ShdslInvIndex OBJECT-TYPE
SYNTAX Hdsl2ShdslUnitId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table corresponds to a physical element
in an HDSL2/SHDSL span. It is based on the EOC unit addressing
scheme with reference to the xtuC."
::= { hdsl2ShdslInventoryEntry 1 }
hdsl2ShdslInvVendorID OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vendor ID as reported in an Inventory Response message."
REFERENCE
"G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
130, Octets 25-32."
::= { hdsl2ShdslInventoryEntry 2 }
hdsl2ShdslInvVendorModelNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE(12))
hdsl2ShdslInvVendorModelNumber OBJECT-TYPEの構文オクテットSTRING（SIZE（12））
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vendor model number as reported in an Inventory Response
message."
REFERENCE
"G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
130, Octets 33-44."
::= { hdsl2ShdslInventoryEntry 3 }
hdsl2ShdslInvVendorSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vendor serial number as reported in an Inventory Response
message."
REFERENCE
"G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
130, Octets 45-56."
::= { hdsl2ShdslInventoryEntry 4 }
hdsl2ShdslInvVendorEOCSoftwareVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vendor EOC version as reported in a Discovery Response
message."
REFERENCE
"G.991.2, Section 9.5.5.7.2, Discovery response - Message ID
129, Octet 12."
::= { hdsl2ShdslInventoryEntry 5 }
hdsl2ShdslInvStandardVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version of the HDSL2/SHDSL standard implemented, as reported
in an Inventory Response message."
REFERENCE
"G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
130, Octet 2."
::= { hdsl2ShdslInventoryEntry 6 }
hdsl2ShdslInvVendorListNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE(3))
hdsl2ShdslInvVendorListNumber OBJECT-TYPEの構文オクテットSTRING（SIZE（3））
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vendor list number as reported in an Inventory Response
message."
REFERENCE
"G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
130, Octets 3-5."
::= { hdsl2ShdslInventoryEntry 7 }
hdsl2ShdslInvVendorIssueNumber OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vendor issue number as reported in an Inventory Response
message."
REFERENCE
"G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
130, Octets 6-7."
::= { hdsl2ShdslInventoryEntry 8 }
hdsl2ShdslInvVendorSoftwareVersion OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vendor software version as reported in an Inventory Response
message."
REFERENCE
"G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
130, Octets 8-13."
::= { hdsl2ShdslInventoryEntry 9 }
hdsl2ShdslInvEquipmentCode OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Equipment code conforming to ANSI T1.213, Coded Identification
of Equipment Entities."
REFERENCE
"G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
130, Octets 14-23."
::= { hdsl2ShdslInventoryEntry 10 }
hdsl2ShdslInvVendorOther OBJECT-TYPE SYNTAX OCTET STRING(SIZE(12))
hdsl2ShdslInvVendorOther OBJECT-TYPEの構文オクテットSTRING（SIZE（12））
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Other vendor information as reported in an Inventory Response
message."
REFERENCE
"G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
130, Octets 57-68."
::= { hdsl2ShdslInventoryEntry 11 }
hdsl2ShdslInvTransmissionModeCapability OBJECT-TYPE
SYNTAX Hdsl2ShdslTransmissionModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the transmission mode capability of the SHDSL unit."
::= { hdsl2ShdslInventoryEntry 12 }
-- Segment Endpoint Configuration Group --
- セグメントエンドポイント設定グループ -
hdsl2ShdslEndpointConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2ShdslEndpointConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table supports configuration parameters for segment
endpoints in an HDSL2/SHDSL line. As this table is indexed
by ifIndex, it MUST be maintained in a persistent manner."
::= { hdsl2ShdslMibObjects 4 }
hdsl2ShdslEndpointConfEntry OBJECT-TYPE
SYNTAX Hdsl2ShdslEndpointConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hdsl2ShdslEndpointConfTable. Each entry
represents a single segment endpoint in an HDSL2/SHDSL line.
It is indexed by the ifIndex of the HDSL2/SHDSL line, the
UnitId of the associated unit, the side of the unit, and the
wire pair of the associated modem."
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair}
::= { hdsl2ShdslEndpointConfTable 1 }
Hdsl2ShdslEndpointConfEntry ::=
SEQUENCE
{ hdsl2ShdslEndpointSide Hdsl2ShdslUnitSide,
hdsl2ShdslEndpointWirePair Hdsl2ShdslWirePair,
hdsl2ShdslEndpointAlarmConfProfile SnmpAdminString
}
hdsl2ShdslEndpointSide OBJECT-TYPE
SYNTAX Hdsl2ShdslUnitSide
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The side of the unit associated with this segment endpoint --
Network/Customer side -- as per the Hdsl2ShdslUnitSide textual
convention."
::= { hdsl2ShdslEndpointConfEntry 1 }
hdsl2ShdslEndpointWirePair OBJECT-TYPE
SYNTAX Hdsl2ShdslWirePair
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wire pair of the modem associated with this segment
endpoint as per the Hdsl2ShdslWirePair textual convention."
::= { hdsl2ShdslEndpointConfEntry 2 }
hdsl2ShdslEndpointAlarmConfProfile OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the alarm threshold values to be used for this segment endpoint. The values are obtained from the alarm configuration profile referenced by this object. The value of this object is the index of the referenced profile in the hdsl2ShdslEndpointAlarmConfProfileTable, or NULL (a zero-length SnmpAdminString). If the value is a zero-length SnmpAdminString, the endpoint uses the default Alarm Configuration Profile for the associated span as per the hdsl2ShdslSpanConfAlarmProfile object in the hdsl2ShdslSpanConfTable. The default value of this object is a zero-length SnmpAdminString.
hdsl2ShdslEndpointAlarmConfProfile OBJECT-TYPE構文れるSnmpAdminString（SIZE（0 32））MAX-ACCESS読み取りと書き込みステータス現在の説明は「このオブジェクトは、アラーム閾値がこのセグメントエンドポイントのために使用されるように設定。値が参照アラーム構成プロファイルから得られますこのオブジェクトがこのオブジェクトの値はhdsl2ShdslEndpointAlarmConfProfileTable、またはNULL（ゼロ長れるSnmpAdminString）内の参照プロファイルの指標である。値がゼロ長れるSnmpAdminStringである場合、エンドポイントは、デフォルトのアラーム設定プロファイルを使用しますhdsl2ShdslSpanConfTableでhdsl2ShdslSpanConfAlarmProfileオブジェクトごとにスパンに関連する。このオブジェクトのデフォルト値はゼロ長れるSnmpAdminStringあります。
Any attempt to set this object to a value that is not the value
of the index for an active entry in the profile table,
hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected."
::= { hdsl2ShdslEndpointConfEntry 3 }
-- Segment Endpoint Current Status/Performance Group
-- hdsl2ShdslEndpointCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2ShdslEndpointCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains current status and performance information
for segment endpoints in HDSL2/SHDSL lines. As with other
tables in this MIB module indexed by ifIndex, entries in this
table MUST be maintained in a persistent manner."
::= { hdsl2ShdslMibObjects 5 }
hdsl2ShdslEndpointCurrEntry OBJECT-TYPE
SYNTAX Hdsl2ShdslEndpointCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hdsl2ShdslEndpointCurrTable. Each entry
contains status and performance information relating to a
single segment endpoint. It is indexed by the ifIndex of the
HDSL2/SHDSL line, the UnitId of the associated unit, the side
of the unit, and the wire pair of the associated modem."
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair }
::= { hdsl2ShdslEndpointCurrTable 1 }
Hdsl2ShdslEndpointCurrEntry ::=
SEQUENCE
{
hdsl2ShdslEndpointCurrAtn Integer32,
hdsl2ShdslEndpointCurrSnrMgn Integer32,
hdsl2ShdslEndpointCurrStatus BITS,
hdsl2ShdslEndpointES Counter32,
hdsl2ShdslEndpointSES Counter32,
hdsl2ShdslEndpointCRCanomalies Counter32,
hdsl2ShdslEndpointLOSWS Counter32,
hdsl2ShdslEndpointUAS Counter32,
hdsl2ShdslEndpointCurr15MinTimeElapsed
Hdsl2ShdslPerfTimeElapsed,
hdsl2ShdslEndpointCurr15MinES PerfCurrentCount,
hdsl2ShdslEndpointCurr15MinSES PerfCurrentCount,
hdsl2ShdslEndpointCurr15MinCRCanomalies PerfCurrentCount,
hdsl2ShdslEndpointCurr15MinLOSWS PerfCurrentCount,
hdsl2ShdslEndpointCurr15MinUAS PerfCurrentCount,
hdsl2ShdslEndpointCurr1DayTimeElapsed
Hdsl2ShdslPerfTimeElapsed,
hdsl2ShdslEndpointCurr1DayES
Hdsl2ShdslPerfCurrDayCount,
hdsl2ShdslEndpointCurr1DaySES
Hdsl2ShdslPerfCurrDayCount, hdsl2ShdslEndpointCurr1DayCRCanomalies Hdsl2ShdslPerfCurrDayCount, hdsl2ShdslEndpointCurr1DayLOSWS Hdsl2ShdslPerfCurrDayCount, hdsl2ShdslEndpointCurr1DayUAS Hdsl2ShdslPerfCurrDayCount, hdsl2ShdslEndpointCurrTipRingReversal INTEGER, hdsl2ShdslEndpointCurrActivationState INTEGER }
Hdsl2ShdslPerfCurrDayCount、hdsl2ShdslEndpointCurr1DayCRCanomalies Hdsl2ShdslPerfCurrDayCount、hdsl2ShdslEndpointCurr1DayLOSWS Hdsl2ShdslPerfCurrDayCount、hdsl2ShdslEndpointCurr1DayUAS Hdsl2ShdslPerfCurrDayCount、hdsl2ShdslEndpointCurrTipRingReversal INTEGER、hdsl2ShdslEndpointCurrActivationState INTEGER}
hdsl2ShdslEndpointCurrAtn OBJECT-TYPE
SYNTAX Integer32(-127..128)
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current loop attenuation for this endpoint as reported in
a Network or Customer Side Performance Status message."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 1 }
hdsl2ShdslEndpointCurrSnrMgn OBJECT-TYPE
SYNTAX Integer32(-127..128)
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current SNR margin for this endpoint as reported in a
Status Response/SNR message."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 2 }
hdsl2ShdslEndpointCurrStatus OBJECT-TYPE SYNTAX BITS { noDefect(0), powerBackoff(1), deviceFault(2), dcContinuityFault(3), snrMarginAlarm(4), loopAttenuationAlarm(5), loswFailureAlarm(6), configInitFailure(7), protocolInitFailure(8), noNeighborPresent(9), loopbackActive(10) }
hdsl2ShdslEndpointCurrStatus OBJECT-TYPE構文BITS {noDefect（0）、powerBackoff（1）、deviceFault（2）、dcContinuityFault（3）、snrMarginAlarm（4）、loopAttenuationAlarm（5）、loswFailureAlarm（6）、configInitFailure（7）、protocolInitFailure（8 ）、noNeighborPresent（9）、loopbackActive（10）}
MAX-ACCESS read-only STATUS current DESCRIPTION "Contains the current state of the endpoint. This is a bit-map of possible conditions. The various bit positions are as follows:
MAX-ACCESS read-onlyステータス現在の説明は、「エンドポイントの現在の状態を格納し、これが可能な条件のビットマップであり、以下のように様々なビット位置です。。。
noDefect There are no defects on the line.
ラインには欠陥がありませんnoDefect。
powerBackoff Indicates enhanced Power Backoff.
powerBackoffは、強化されたパワーバックオフを示します。
deviceFault Indicates that a vendor-dependent diagnostic or self-test fault has been detected.
deviceFaultは、ベンダー依存診断または自己テスト故障が検出されたことを示します。
dcContinuityFault Indicates vendor-dependent conditions that interfere with span powering such as short and open circuits.
dcContinuityFaultはスパンが短く、開回路のような給電を妨害ベンダー依存状態を示します。
snrMarginAlarm Indicates that the SNR margin has dropped below the alarm threshold.
snrMarginAlarmは、SNRマージンがアラームしきい値を下回ったことを示します。
loopAttenuationAlarm Indicates that the loop attenuation exceeds the alarm threshold.
loopAttenuationAlarmは、ループ減衰が警告しきい値を超えていることを示します。
loswFailureAlarm Indicates a forward LOSW alarm.
愛障害アラームは、前方LOSSアラームを示します。
configInitFailure Endpoint failure during initialization due to paired endpoint not able to support requested configuration.
原因要求された構成をサポートすることができませんペアエンドポイントへの初期化時にconfigInitFailureエンドポイントの失敗。
protocolInitFailure Endpoint failure during initialization due to incompatible protocol used by the paired endpoint.
一対のエンドポイントによって使用される互換性のないプロトコルによる初期化中protocolInitFailureエンドポイント障害。
noNeighborPresent Endpoint failure during initialization due to no activation sequence detected from paired endpoint.
一対のエンドポイントから検出されない活性化配列による初期化中noNeighborPresentエンドポイント障害。
loopbackActive A loopback is currently active at this segment endpoint.
loopbackActiveループバックは、このセグメントのエンドポイントで現在アクティブです。
This is intended to supplement ifOperStatus. Note that there is a 1:1 relationship between the status bits defined in this object and the notification thresholds defined elsewhere in this MIB module." REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
これは、ますifOperStatusを補足するものです。 1があることに注意してください。このMIBモジュール内の他の場所で定義されたこのオブジェクトに定義されたステータス・ビット及び通知閾値との間の1の関係「REFERENCE」HDSL2セクション7.5.3.7。 SHDSLセクション9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 3 }
hdsl2ShdslEndpointES OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Errored Seconds (ES) on this endpoint since the xU
was last restarted."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 4 }
hdsl2ShdslEndpointSES OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Severely Errored Seconds (SES) on this endpoint
since the xU was last restarted."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 5 }
hdsl2ShdslEndpointCRCanomalies OBJECT-TYPE
SYNTAX Counter32
UNITS "detected CRC Anomalies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of CRC anomalies on this endpoint since the xU was
last restarted."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 6 }
hdsl2ShdslEndpointLOSWS OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Loss of Sync Word (LOSW) Seconds on this endpoint
since the xU was last restarted."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 7 }
hdsl2ShdslEndpointUAS OBJECT-TYPE SYNTAX Counter32
hdsl2ShdslEndpointUASのOBJECT-TYPE SYNTAXカウンタ
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Unavailable Seconds (UAS) on this endpoint since
the xU was last restarted."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 8 }
hdsl2ShdslEndpointCurr15MinTimeElapsed OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total elapsed seconds in the current 15-minute interval."
::= { hdsl2ShdslEndpointCurrEntry 9 }
hdsl2ShdslEndpointCurr15MinES OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Errored Seconds (ES) in the current 15-minute
interval."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 10 }
hdsl2ShdslEndpointCurr15MinSES OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Severely Errored Seconds (SES) in the current
15-minute interval."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 11 }
hdsl2ShdslEndpointCurr15MinCRCanomalies OBJECT-TYPE SYNTAX PerfCurrentCount UNITS "detected CRC Anomalies" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of CRC anomalies in the current 15-minute interval." REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
hdsl2ShdslEndpointCurr15MinCRCanomalies OBJECT-TYPE構文PerfCurrentCountのUNITS MAX-ACCESS read-only説明 "現在の15分間隔のCRC異常の数。" "CRC異常を検出しました" REFERENCE "HDSL2セクション7.5.3.7、SHDSLセクション9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 12 }
hdsl2ShdslEndpointCurr15MinLOSWS OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Loss of Sync Word (LOSW) Seconds in the current
15-minute interval."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 13 }
hdsl2ShdslEndpointCurr15MinUAS OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Unavailable Seconds (UAS) in the current 15-minute
interval."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 14 }
hdsl2ShdslEndpointCurr1DayTimeElapsed OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of seconds that have elapsed since the beginning of
the current 1-day interval."
::= { hdsl2ShdslEndpointCurrEntry 15 }
hdsl2ShdslEndpointCurr1DayES OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfCurrDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Errored Seconds (ES) during the current day as
measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 16 }
hdsl2ShdslEndpointCurr1DaySES OBJECT-TYPE SYNTAX Hdsl2ShdslPerfCurrDayCount UNITS "seconds"
hdsl2ShdslEndpointCurr1DaySES OBJECT-TYPE SYNTAX Hdsl2ShdslPerfCurrDayCountのUNITS "秒"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Severely Errored Seconds (SES) during the current
day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 17 }
hdsl2ShdslEndpointCurr1DayCRCanomalies OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfCurrDayCount
UNITS "detected CRC Anomalies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of CRC anomalies during the current day as measured
by hdsl2ShdslEndpointCurr1DayTimeElapsed."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 18 }
hdsl2ShdslEndpointCurr1DayLOSWS OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfCurrDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Loss of Sync Word (LOSW) Seconds during the current
day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 19 }
hdsl2ShdslEndpointCurr1DayUAS OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfCurrDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Unavailable Seconds (UAS) during the current day as
measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2ShdslEndpointCurrEntry 20 }
hdsl2ShdslEndpointCurrTipRingReversal OBJECT-TYPE SYNTAX INTEGER { normal(1), reversed(2) } MAX-ACCESS read-only
hdsl2ShdslEndpointCurrTipRingReversalのOBJECT-TYPE SYNTAX INTEGERはMAX-ACCESS読み取り専用{ノーマル（1）、（2）逆}
STATUS current
DESCRIPTION
"This object indicates the state of the tip/ring for the
wire pair."
::= { hdsl2ShdslEndpointCurrEntry 21 }
hdsl2ShdslEndpointCurrActivationState OBJECT-TYPE
SYNTAX INTEGER
{
preActivation(1), -- PreTrain
activation(2), -- Training
data(3) -- Trained
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the activation or training state of
the wire pair."
REFERENCE "ITU-T G.991.2, Section 6.2 PMD Activation Sequence"
::= { hdsl2ShdslEndpointCurrEntry 22 }
-- Segment Endpoint 15-Minute Interval Status/Performance Group --
- セグメントエンドポイントの15分間隔のステータス/パフォーマンスグループ -
hdsl2Shdsl15MinIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2Shdsl15MinIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides one row for each HDSL2/SHDSL endpoint
performance data collection interval. This table contains
live data from equipment. As such, it is NOT persistent."
::= { hdsl2ShdslMibObjects 6 }
hdsl2Shdsl15MinIntervalEntry OBJECT-TYPE
SYNTAX Hdsl2Shdsl15MinIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hdsl2Shdsl15MinIntervalTable."
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair, hdsl2Shdsl15MinIntervalNumber}
::= { hdsl2Shdsl15MinIntervalTable 1 }
Hdsl2Shdsl15MinIntervalEntry ::=
SEQUENCE
{
hdsl2Shdsl15MinIntervalNumber Unsigned32, hdsl2Shdsl15MinIntervalES PerfIntervalCount,
hdsl2Shdsl15MinIntervalSES PerfIntervalCount,
hdsl2Shdsl15MinIntervalCRCanomalies PerfIntervalCount,
hdsl2Shdsl15MinIntervalLOSWS PerfIntervalCount,
hdsl2Shdsl15MinIntervalUAS PerfIntervalCount
}
hdsl2Shdsl15MinIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32(1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Data Interval number. Interval 1 is the most
recent previous interval; interval 96 is 24 hours ago.
Intervals 2..96 are optional."
::= { hdsl2Shdsl15MinIntervalEntry 1 }
hdsl2Shdsl15MinIntervalES OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Errored Seconds (ES) during the interval."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2Shdsl15MinIntervalEntry 2 }
hdsl2Shdsl15MinIntervalSES OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Severely Errored Seconds (SES) during the interval."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2Shdsl15MinIntervalEntry 3 }
hdsl2Shdsl15MinIntervalCRCanomalies OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "detected CRC Anomalies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of CRC anomalies during the interval."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2Shdsl15MinIntervalEntry 4 }
hdsl2Shdsl15MinIntervalLOSWS OBJECT-TYPE
hdsl2Shdsl15MinIntervalLOSWSのOBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Loss of Sync Word (LOSW) Seconds during the
interval."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2Shdsl15MinIntervalEntry 5 }
hdsl2Shdsl15MinIntervalUAS OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Unavailable Seconds (UAS) during the interval."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2Shdsl15MinIntervalEntry 6 }
-- Segment Endpoint 1-Day Interval Status/Performance Group --
- セグメントエンドポイント1-日間隔ステータス/パフォーマンスグループ -
hdsl2Shdsl1DayIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2Shdsl1DayIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides one row for each HDSL2/SHDSL endpoint
performance data collection interval. This table contains
live data from equipment. As such, it is NOT persistent."
::= { hdsl2ShdslMibObjects 7 }
hdsl2Shdsl1DayIntervalEntry OBJECT-TYPE
SYNTAX Hdsl2Shdsl1DayIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hdsl2Shdsl1DayIntervalTable."
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair, hdsl2Shdsl1DayIntervalNumber }
::= { hdsl2Shdsl1DayIntervalTable 1 }
Hdsl2Shdsl1DayIntervalEntry ::=
SEQUENCE
{
hdsl2Shdsl1DayIntervalNumber Unsigned32,
hdsl2Shdsl1DayIntervalMoniSecs Hdsl2ShdslPerfTimeElapsed, hdsl2Shdsl1DayIntervalES Hdsl2Shdsl1DayIntervalCount,
hdsl2Shdsl1DayIntervalSES Hdsl2Shdsl1DayIntervalCount,
hdsl2Shdsl1DayIntervalCRCanomalies Hdsl2Shdsl1DayIntervalCount,
hdsl2Shdsl1DayIntervalLOSWS Hdsl2Shdsl1DayIntervalCount,
hdsl2Shdsl1DayIntervalUAS Hdsl2Shdsl1DayIntervalCount
}
hdsl2Shdsl1DayIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32(1..30)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"History Data Interval number. Interval 1 is the most
recent previous day; interval 30 is 30 days ago. Intervals
2..30 are optional."
::= { hdsl2Shdsl1DayIntervalEntry 1 }
hdsl2Shdsl1DayIntervalMoniSecs OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time in the 1-day interval over which the
performance monitoring information is actually counted.
This value will be the same as the interval duration except
in a situation where performance monitoring data could not
be collected for any reason."
::= { hdsl2Shdsl1DayIntervalEntry 2 }
hdsl2Shdsl1DayIntervalES OBJECT-TYPE
SYNTAX Hdsl2Shdsl1DayIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Errored Seconds (ES) during the 1-day interval as
measured by hdsl2Shdsl1DayIntervalMoniSecs."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2Shdsl1DayIntervalEntry 3 }
hdsl2Shdsl1DayIntervalSES OBJECT-TYPE SYNTAX Hdsl2Shdsl1DayIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Severely Errored Seconds (SES) during the 1-day
1日の間に重大エラー秒（SES）のhdsl2Shdsl1DayIntervalSES OBJECT-TYPE SYNTAX Hdsl2Shdsl1DayIntervalCountのUNITS "秒" MAX-ACCESS read-onlyステータス現在の説明「カウント
interval as measured by hdsl2Shdsl1DayIntervalMoniSecs."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2Shdsl1DayIntervalEntry 4 }
hdsl2Shdsl1DayIntervalCRCanomalies OBJECT-TYPE
SYNTAX Hdsl2Shdsl1DayIntervalCount
UNITS "detected CRC Anomalies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of CRC anomalies during the 1-day interval as
measured by hdsl2Shdsl1DayIntervalMoniSecs."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2Shdsl1DayIntervalEntry 5 }
hdsl2Shdsl1DayIntervalLOSWS OBJECT-TYPE
SYNTAX Hdsl2Shdsl1DayIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Loss of Sync Word (LOSW) Seconds during the 1-day
interval as measured by hdsl2Shdsl1DayIntervalMoniSecs."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2Shdsl1DayIntervalEntry 6 }
hdsl2Shdsl1DayIntervalUAS OBJECT-TYPE
SYNTAX Hdsl2Shdsl1DayIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Unavailable Seconds (UAS) during the 1-day interval
as measured by hdsl2Shdsl1DayIntervalMoniSecs."
REFERENCE "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
::= { hdsl2Shdsl1DayIntervalEntry 7 }
-- Maintenance Group --
- メンテナンスグループ -
hdsl2ShdslEndpointMaintTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2ShdslEndpointMaintEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table supports maintenance operations (e.g., loopbacks)
to be performed on HDSL2/SHDSL segment endpoints. This table
contains live data from equipment. As such, it is NOT persistent."
::= { hdsl2ShdslMibObjects 8 }
hdsl2ShdslEndpointMaintEntry OBJECT-TYPE
SYNTAX Hdsl2ShdslEndpointMaintEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hdsl2ShdslEndpointMaintTable. Each entry
corresponds to a single segment endpoint and is indexed by the
ifIndex of the HDSL2/SHDSL line, the UnitId of the associated
unit, and the side of the unit."
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide }
::= { hdsl2ShdslEndpointMaintTable 1 }
Hdsl2ShdslEndpointMaintEntry ::=
SEQUENCE
{
hdsl2ShdslMaintLoopbackConfig INTEGER,
hdsl2ShdslMaintTipRingReversal INTEGER,
hdsl2ShdslMaintPowerBackOff INTEGER,
hdsl2ShdslMaintSoftRestart INTEGER
}
hdsl2ShdslMaintLoopbackConfig OBJECT-TYPE
SYNTAX INTEGER
{
noLoopback(1),
normalLoopback(2),
specialLoopback(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls configuration of loopbacks for the
associated segment endpoint. The status of the loopback
is obtained via the hdsl2ShdslEndpointCurrStatus object."
::= { hdsl2ShdslEndpointMaintEntry 1 }
hdsl2ShdslMaintTipRingReversal OBJECT-TYPE SYNTAX INTEGER { normal(1), reversed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION
hdsl2ShdslMaintTipRingReversalのOBJECT-TYPE SYNTAX INTEGER {逆に、（1）正常（2）} MAX-ACCESS read-only説明
"This object indicates the state of the tip/ring pair at the
associated segment endpoint."
::= { hdsl2ShdslEndpointMaintEntry 2 }
hdsl2ShdslMaintPowerBackOff OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
enhanced(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the receiver at the associated
segment endpoint to operate in default or enhanced power
backoff mode."
::= { hdsl2ShdslEndpointMaintEntry 3 }
hdsl2ShdslMaintSoftRestart OBJECT-TYPE
SYNTAX INTEGER
{
ready(1),
restart(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables the manager to trigger a soft restart
of the modem at the associated segment endpoint. The
manager may only set this object to the 'restart(2)'
value, which initiates a restart. The agent will perform a
restart after approximately 5 seconds. Following the 5 second
period, the agent will restore the object to the 'ready(1)'
state."
::= { hdsl2ShdslEndpointMaintEntry 4 }
hdsl2ShdslUnitMaintTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2ShdslUnitMaintEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table supports maintenance operations for units in a
HDSL2/SHDSL line. Entries in this table MUST be maintained
in a persistent manner."
::= { hdsl2ShdslMibObjects 9 }
hdsl2ShdslUnitMaintEntry OBJECT-TYPE SYNTAX Hdsl2ShdslUnitMaintEntry
hdsl2ShdslUnitMaintEntryのOBJECT-TYPE SYNTAX Hdsl2ShdslUnitMaintEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hdsl2ShdslUnitMaintTable. Each entry
corresponds to a single unit and is indexed by the
ifIndex of the HDSL2/SHDSL line and the UnitId of the
associated unit."
INDEX { ifIndex, hdsl2ShdslInvIndex }
::= { hdsl2ShdslUnitMaintTable 1 }
Hdsl2ShdslUnitMaintEntry ::=
SEQUENCE
{
hdsl2ShdslMaintLoopbackTimeout Integer32,
hdsl2ShdslMaintUnitPowerSource INTEGER
}
hdsl2ShdslMaintLoopbackTimeout OBJECT-TYPE
SYNTAX Integer32(0..4095)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the timeout value for loopbacks
initiated at segments endpoints contained in the associated
unit. A value of 0 disables the timeout."
::= { hdsl2ShdslUnitMaintEntry 1 }
hdsl2ShdslMaintUnitPowerSource OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
span(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the DC power source being used by the
associated unit."
::= { hdsl2ShdslUnitMaintEntry 2 }
-- Span Configuration Profile Group --
- スパン構成プロファイルグループ -
hdsl2ShdslSpanConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF Hdsl2ShdslSpanConfProfileEntry MAX-ACCESS not-accessible STATUS current
Hdsl2ShdslSpanConfProfileEntry MAX-ACCESSステータス電流のhdsl2ShdslSpanConfProfileTable OBJECT-TYPE構文配列
DESCRIPTION
"This table supports definitions of span configuration
profiles for SHDSL lines. HDSL2 does not support these
configuration options. This table MUST be maintained
in a persistent manner."
::= { hdsl2ShdslMibObjects 10 }
hdsl2ShdslSpanConfProfileEntry OBJECT-TYPE
SYNTAX Hdsl2ShdslSpanConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry corresponds to a single span configuration
profile. Each profile contains a set of span configuration
parameters. The configuration parameters in a profile are
applied to those lines referencing that profile (see the
hdsl2ShdslSpanConfProfile object). Profiles may be
created/deleted using the row creation/deletion mechanism
via hdsl2ShdslSpanConfProfileRowStatus. If an active
entry is referenced in hdsl2ShdslSpanConfProfile, the
entry MUST remain active until all references are removed."
INDEX { IMPLIED hdsl2ShdslSpanConfProfileName }
::= { hdsl2ShdslSpanConfProfileTable 1 }
Hdsl2ShdslSpanConfProfileEntry ::=
SEQUENCE
{
hdsl2ShdslSpanConfProfileName SnmpAdminString,
hdsl2ShdslSpanConfWireInterface INTEGER,
hdsl2ShdslSpanConfMinLineRate Unsigned32,
hdsl2ShdslSpanConfMaxLineRate Unsigned32,
hdsl2ShdslSpanConfPSD INTEGER,
hdsl2ShdslSpanConfTransmissionMode
Hdsl2ShdslTransmissionModeType,
hdsl2ShdslSpanConfRemoteEnabled INTEGER,
hdsl2ShdslSpanConfPowerFeeding INTEGER,
hdsl2ShdslSpanConfCurrCondTargetMarginDown Integer32,
hdsl2ShdslSpanConfWorstCaseTargetMarginDown Integer32,
hdsl2ShdslSpanConfCurrCondTargetMarginUp Integer32,
hdsl2ShdslSpanConfWorstCaseTargetMarginUp Integer32,
hdsl2ShdslSpanConfUsedTargetMargins BITS,
hdsl2ShdslSpanConfReferenceClock
Hdsl2ShdslClockReferenceType,
hdsl2ShdslSpanConfLineProbeEnable INTEGER,
hdsl2ShdslSpanConfProfileRowStatus RowStatus
}
hdsl2ShdslSpanConfProfileName OBJECT-TYPE
hdsl2ShdslSpanConfProfileNameのOBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is the unique index associated with this profile.
Entries in this table are referenced via the object
hdsl2ShdslSpanConfProfile in Hdsl2ShdslSpanConfEntry."
::= { hdsl2ShdslSpanConfProfileEntry 1 }
hdsl2ShdslSpanConfWireInterface OBJECT-TYPE
SYNTAX INTEGER
{
twoWire(1),
fourWire(2),
sixWire(3),
eightWire(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the two-wire or optional four-wire,
six-wire, or eight-wire operation for SHDSL lines."
DEFVAL { twoWire }
::= { hdsl2ShdslSpanConfProfileEntry 2 }
hdsl2ShdslSpanConfMinLineRate OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the minimum transmission rate for
the associated SHDSL Line in bits-per-second (bps) and includes
both payload (user data) and any applicable framing overhead.
If the minimum line rate equals the maximum line rate
(hdsl2ShdslSpanMaxLineRate), the line rate is considered
'fixed'. If the minimum line rate is less than the
maximum line rate, the line rate is considered
'rate-adaptive'."
DEFVAL { 1552000 }
::= { hdsl2ShdslSpanConfProfileEntry 3 }
hdsl2ShdslSpanConfMaxLineRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "bps" MAX-ACCESS read-create STATUS current DESCRIPTION
hdsl2ShdslSpanConfMaxLineRateのOBJECT-TYPE構文Unsigned32（0 4294967295）ユニットはMAX-ACCESSはリード作成しますステータス現在の説明 "bpsの"
"This object configures the maximum transmission rate for
the associated SHDSL Line in bits-per-second (bps) and includes
both payload (user data) and any applicable framing overhead.
If the minimum line rate equals the maximum line rate
(hdsl2ShdslSpanMaxLineRate), the line rate is considered
'fixed'. If the minimum line rate is less than the
maximum line rate, the line rate is considered
'rate-adaptive'."
DEFVAL { 1552000 }
::= { hdsl2ShdslSpanConfProfileEntry 4 }
hdsl2ShdslSpanConfPSD OBJECT-TYPE
SYNTAX INTEGER
{
symmetric(1),
asymmetric(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures use of symmetric/asymmetric PSD (Power
Spectral Density) Mask for the associated SHDSL Line. Support
for symmetric PSD is mandatory for all supported data rates.
Support for asymmetric PSD is optional."
DEFVAL { symmetric }
::= { hdsl2ShdslSpanConfProfileEntry 5 }
hdsl2ShdslSpanConfTransmissionMode OBJECT-TYPE
SYNTAX Hdsl2ShdslTransmissionModeType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the regional setting for the SHDSL
line."
DEFVAL { { region1 } }
::= { hdsl2ShdslSpanConfProfileEntry 6 }
hdsl2ShdslSpanConfRemoteEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enables/disables support for remote management of the units in an SHDSL line from the STU-R via the EOC."
hdsl2ShdslSpanConfRemoteEnabled OBJECT-TYPE SYNTAX INTEGER {イネーブル（1）、無効（2）} MAX-ACCESSリード作成ステータス現在の説明は「このオブジェクトは可能/介しSTU-RからSHDSLライン内のユニットのリモート管理のためのサポートを無効にしEOC。」
DEFVAL { enabled }
::= { hdsl2ShdslSpanConfProfileEntry 7 }
hdsl2ShdslSpanConfPowerFeeding OBJECT-TYPE
SYNTAX INTEGER
{
noPower(1),
powerFeed(2),
wettingCurrent(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables/disables support for optional power
feeding in an SHDSL line."
DEFVAL { noPower }
::= { hdsl2ShdslSpanConfProfileEntry 8 }
hdsl2ShdslSpanConfCurrCondTargetMarginDown OBJECT-TYPE
SYNTAX Integer32(-10..21)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the downstream current condition target
SNR margin for an SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR margin
is the desired SNR margin for a unit."
DEFVAL { 0 }
::= { hdsl2ShdslSpanConfProfileEntry 9 }
hdsl2ShdslSpanConfWorstCaseTargetMarginDown OBJECT-TYPE
SYNTAX Integer32(-10..21)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the downstream worst-case target SNR
margin for an SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR
margin is the desired SNR margin for a unit."
DEFVAL { 0 }
::= { hdsl2ShdslSpanConfProfileEntry 10 }
hdsl2ShdslSpanConfCurrCondTargetMarginUp OBJECT-TYPE SYNTAX Integer32(-10..21) UNITS "dB" MAX-ACCESS read-create
hdsl2ShdslSpanConfCurrCondTargetMarginUpのOBJECT-TYPE構文Integer32（-10..21）UNITS "dBの" MAX-ACCESSはリード作成
STATUS current
DESCRIPTION
"This object specifies the upstream current-condition target
SNR margin for an SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR margin
is the desired SNR margin for a unit."
DEFVAL { 0 }
::= { hdsl2ShdslSpanConfProfileEntry 11 }
hdsl2ShdslSpanConfWorstCaseTargetMarginUp OBJECT-TYPE
SYNTAX Integer32(-10..21)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the upstream worst-case target SNR
margin for an SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR margin
is the desired SNR margin for a unit."
DEFVAL { 0 }
::= { hdsl2ShdslSpanConfProfileEntry 12 }
hdsl2ShdslSpanConfUsedTargetMargins OBJECT-TYPE SYNTAX BITS { currCondDown(0), worstCaseDown(1), currCondUp(2), worstCaseUp(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether a target SNR margin is enabled or disabled. This is a bit-map of possible settings. The various bit positions are as follows:
{currCondDown（0）、worstCaseDown（1）、currCondUp（2）、worstCaseUp（3）} MAX-ACCESSリード作成ステータス現在の説明は「ターゲットSNRマージンが有効か無効かを示しhdsl2ShdslSpanConfUsedTargetMargins OBJECT-TYPE構文BITS。これは。次のように可能な設定のビットマップ、種々のビット位置は以下のとおりです。
currCondDown - current-condition downstream target SNR
margin enabled
worstCaseDown - worst-case downstream target SNR margin enabled
worstCaseDown - 最悪の場合、下流のターゲットSNRマージンが有効
currCondUp - current-condition upstream target SNR margin enabled
currCondUp - 現在の条件上流のターゲットSNRマージンが有効
worstCaseUp - worst-case upstream target SNR margin enabled."
worstCaseUp - 有効になって最悪の場合、上流の目標SNRマージン「。
DEFVAL { { currCondDown } }
::= { hdsl2ShdslSpanConfProfileEntry 13 }
hdsl2ShdslSpanConfReferenceClock OBJECT-TYPE
SYNTAX Hdsl2ShdslClockReferenceType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the clock reference for the STU-C
in an SHDSL Line."
DEFVAL { localClk }
::= { hdsl2ShdslSpanConfProfileEntry 14 }
hdsl2ShdslSpanConfLineProbeEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables/disables support for Line Probe of
the units in an SHDSL line. When Line Probe is enabled, the
system performs Line Probing to find the best possible
rate. If Line Probe is disabled, the rate adaptation phase
is skipped to shorten set up time."
DEFVAL { disable }
::= { hdsl2ShdslSpanConfProfileEntry 15 }
hdsl2ShdslSpanConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls creation/deletion of the associated
entry in this table per the semantics of RowStatus. If an
active entry is referenced in hdsl2ShdslSpanConfProfile, the
entry MUST remain active until all references are removed."
::= { hdsl2ShdslSpanConfProfileEntry 16 }
-- Segment Endpoint Alarm Configuration Profile group --
- セグメントエンドポイントのアラーム設定プロファイルグループ -
hdsl2ShdslEndpointAlarmConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF Hdsl2ShdslEndpointAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current
Hdsl2ShdslEndpointAlarmConfProfileEntry MAX-ACCESSステータス電流のhdsl2ShdslEndpointAlarmConfProfileTable OBJECT-TYPE構文配列
DESCRIPTION
"This table supports definitions of alarm configuration
profiles for HDSL2/SHDSL segment endpoints. This table
MUST be maintained in a persistent manner."
::= { hdsl2ShdslMibObjects 11 }
hdsl2ShdslEndpointAlarmConfProfileEntry OBJECT-TYPE
SYNTAX Hdsl2ShdslEndpointAlarmConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry corresponds to a single alarm configuration profile.
Each profile contains a set of parameters for setting alarm
thresholds for various performance attributes monitored at
HDSL2/SHDSL segment endpoints. Profiles may be created/deleted
using the row creation/deletion mechanism via
hdsl2ShdslEndpointAlarmConfProfileRowStatus. If an active
entry is referenced in either hdsl2ShdslSpanConfAlarmProfile
or hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain
active until all references are removed."
INDEX { IMPLIED hdsl2ShdslEndpointAlarmConfProfileName }
::= { hdsl2ShdslEndpointAlarmConfProfileTable 1 }
Hdsl2ShdslEndpointAlarmConfProfileEntry ::=
SEQUENCE
{
hdsl2ShdslEndpointAlarmConfProfileName SnmpAdminString,
hdsl2ShdslEndpointThreshLoopAttenuation Integer32,
hdsl2ShdslEndpointThreshSNRMargin Integer32,
hdsl2ShdslEndpointThreshES
Hdsl2ShdslPerfIntervalThreshold,
hdsl2ShdslEndpointThreshSES
Hdsl2ShdslPerfIntervalThreshold,
hdsl2ShdslEndpointThreshCRCanomalies Integer32,
hdsl2ShdslEndpointThreshLOSWS
Hdsl2ShdslPerfIntervalThreshold,
hdsl2ShdslEndpointThreshUAS
Hdsl2ShdslPerfIntervalThreshold,
hdsl2ShdslEndpointAlarmConfProfileRowStatus RowStatus
}
hdsl2ShdslEndpointAlarmConfProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is the unique index associated with this profile."
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 1 }
hdsl2ShdslEndpointThreshLoopAttenuation OBJECT-TYPE
SYNTAX Integer32(-127..128)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the loop attenuation alarm threshold.
When the current value of hdsl2ShdslEndpointCurrAtn reaches
or exceeds this threshold, an hdsl2ShdslLoopAttenCrossing
MAY be generated."
DEFVAL { 0 }
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 2 }
hdsl2ShdslEndpointThreshSNRMargin OBJECT-TYPE
SYNTAX Integer32(-127..128)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the SNR margin alarm threshold.
When the current value of hdsl2ShdslEndpointCurrSnrMgn
reaches or drops below this threshold, a
hdsl2ShdslSNRMarginCrossing MAY be generated."
DEFVAL { 0 }
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 3 }
hdsl2ShdslEndpointThreshES OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of
Errored Seconds (ES) within any given 15-minute performance
data collection interval. If the value of Errored Seconds
in a particular 15-minute collection interval reaches/
exceeds this value, an hdsl2ShdslPerfESThresh MAY be
generated. At most, one notification will be sent per
interval per endpoint."
DEFVAL { 0 }
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 4 }
hdsl2ShdslEndpointThreshSES OBJECT-TYPE SYNTAX Hdsl2ShdslPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION
hdsl2ShdslEndpointThreshSES OBJECT-TYPE SYNTAX Hdsl2ShdslPerfIntervalThresholdのUNITS "秒" MAX-ACCESSはリード作成しますステータス現在の説明
"This object configures the threshold for the number of
Severely Errored Seconds (SES) within any given 15-minute
performance data collection interval. If the value of
Severely Errored Seconds in a particular 15-minute collection
interval reaches/exceeds this value, an hdsl2ShdslPerfSESThresh
MAY be generated. At most, one notification will be sent per
interval per endpoint."
DEFVAL { 0 }
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 5 }
hdsl2ShdslEndpointThreshCRCanomalies OBJECT-TYPE
SYNTAX Integer32
UNITS "detected CRC Anomalies"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of
CRC anomalies within any given 15-minute performance data
collection interval. If the value of CRC anomalies in a
particular 15-minute collection interval reaches/exceeds
this value, an hdsl2ShdslPerfCRCanomaliesThresh MAY be
generated. At most, one notification will be sent per
interval per endpoint."
DEFVAL { 0 }
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 6 }
hdsl2ShdslEndpointThreshLOSWS OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of
Loss of Sync Word (LOSW) Seconds within any given 15-minute
performance data collection interval. If the value of LOSW
in a particular 15-minute collection interval reaches/exceeds
this value, an hdsl2ShdslPerfLOSWSThresh MAY be generated.
At most, one notification will be sent per interval per
endpoint."
DEFVAL { 0 }
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 7 }
hdsl2ShdslEndpointThreshUAS OBJECT-TYPE SYNTAX Hdsl2ShdslPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION
hdsl2ShdslEndpointThreshUAS OBJECT-TYPE SYNTAX Hdsl2ShdslPerfIntervalThresholdのUNITS "秒" MAX-ACCESSはリード作成しますステータス現在の説明
"This object configures the threshold for the number of
Unavailable Seconds (UAS) within any given 15-minute
performance data collection interval. If the value of UAS
in a particular 15-minute collection interval reaches/exceeds
this value, an hdsl2ShdslPerfUASThresh MAY be generated.
At most, one notification will be sent per interval per
endpoint."
DEFVAL { 0 }
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 8 }
hdsl2ShdslEndpointAlarmConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls creation/deletion of the associated
entry in this table as per the semantics of RowStatus.
If an active entry is referenced in either
hdsl2ShdslSpanConfAlarmProfile or
hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain
active until all references are removed."
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 9 }
-- Notifications Group --
- 通知グループ -
hdsl2ShdslNotifications OBJECT IDENTIFIER ::= { hdsl2ShdslMIB 0 }
hdsl2ShdslLoopAttenCrossing NOTIFICATION-TYPE
OBJECTS
{
hdsl2ShdslEndpointCurrAtn,
hdsl2ShdslEndpointThreshLoopAttenuation
}
STATUS current
DESCRIPTION
"This notification indicates that the loop attenuation
threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation
value) has been reached/exceeded for the HDSL2/SHDSL segment
endpoint."
::= { hdsl2ShdslNotifications 1 }
hdsl2ShdslSNRMarginCrossing NOTIFICATION-TYPE OBJECTS { hdsl2ShdslEndpointCurrSnrMgn, hdsl2ShdslEndpointThreshSNRMargin }
hdsl2ShdslSNRMarginCrossing NOTIFICATION-TYPEオブジェクト{hdsl2ShdslEndpointCurrSnrMgn、hdsl2ShdslEndpointThreshSNRMargin}
STATUS current
DESCRIPTION
"This notification indicates that the SNR margin threshold (as
per the hdsl2ShdslEndpointThreshSNRMargin value) has been
reached/exceeded for the HDSL2/SHDSL segment endpoint."
::= { hdsl2ShdslNotifications 2 }
hdsl2ShdslPerfESThresh NOTIFICATION-TYPE
OBJECTS
{
hdsl2ShdslEndpointCurr15MinES,
hdsl2ShdslEndpointThreshES
}
STATUS current
DESCRIPTION
"This notification indicates that the errored seconds
threshold (as per the hdsl2ShdslEndpointThreshES value)
has been reached/exceeded for the HDSL2/SHDSL segment
endpoint."
::= { hdsl2ShdslNotifications 3 }
hdsl2ShdslPerfSESThresh NOTIFICATION-TYPE
OBJECTS
{
hdsl2ShdslEndpointCurr15MinSES,
hdsl2ShdslEndpointThreshSES
}
STATUS current
DESCRIPTION
"This notification indicates that the severely errored seconds
threshold (as per the hdsl2ShdslEndpointThreshSES value) has
been reached/exceeded for the HDSL2/SHDSL segment endpoint."
::= { hdsl2ShdslNotifications 4 }
hdsl2ShdslPerfCRCanomaliesThresh NOTIFICATION-TYPE
OBJECTS
{
hdsl2ShdslEndpointCurr15MinCRCanomalies,
hdsl2ShdslEndpointThreshCRCanomalies
}
STATUS current
DESCRIPTION
"This notification indicates that the CRC anomalies threshold
(as per the hdsl2ShdslEndpointThreshCRCanomalies value) has
been reached/exceeded for the HDSL2/SHDSL segment endpoint."
::= { hdsl2ShdslNotifications 5 }
hdsl2ShdslPerfLOSWSThresh NOTIFICATION-TYPE
hdsl2ShdslPerfLOSWSThreshのNOTIFICATION-TYPE
OBJECTS
{
hdsl2ShdslEndpointCurr15MinLOSWS,
hdsl2ShdslEndpointThreshLOSWS
}
STATUS current
DESCRIPTION
"This notification indicates that the LOSW Seconds threshold
(as per the hdsl2ShdslEndpointThreshLOSWS value) has been
reached/exceeded for the HDSL2/SHDSL segment endpoint."
::= { hdsl2ShdslNotifications 6 }
hdsl2ShdslPerfUASThresh NOTIFICATION-TYPE
OBJECTS
{
hdsl2ShdslEndpointCurr15MinUAS,
hdsl2ShdslEndpointThreshUAS
}
STATUS current
DESCRIPTION
"This notification indicates that the unavailable seconds
threshold (as per the hdsl2ShdslEndpointThreshUAS value) has
been reached/exceeded for the HDSL2/SHDSL segment endpoint."
::= { hdsl2ShdslNotifications 7 }
hdsl2ShdslSpanInvalidNumRepeaters NOTIFICATION-TYPE
OBJECTS
{
hdsl2ShdslSpanConfNumRepeaters
}
STATUS current
DESCRIPTION
"This notification indicates that a mismatch has been detected
between the number of repeater/regenerator units configured
for an HDSL2/SHDSL line via the hdsl2ShdslSpanConfNumRepeaters
object and the actual number of repeater/regenerator units
discovered via the EOC."
::= { hdsl2ShdslNotifications 8 }
hdsl2ShdslLoopbackFailure NOTIFICATION-TYPE OBJECTS { hdsl2ShdslMaintLoopbackConfig } STATUS current DESCRIPTION "This notification indicates that an endpoint maintenance loopback command failed for an HDSL2/SHDSL segment."
hdsl2ShdslLoopbackFailure NOTIFICATION-TYPEオブジェクト{hdsl2ShdslMaintLoopbackConfig}ステータス現在の説明は「この通知は、エンドポイントメンテナンスループバックコマンドはHDSL2 / SHDSLセグメントについて失敗したことを示しています。」
::= { hdsl2ShdslNotifications 9 }
hdsl2ShdslpowerBackoff NOTIFICATION-TYPE
OBJECTS
{
hdsl2ShdslEndpointCurrStatus
}
STATUS current
DESCRIPTION
"This notification indicates that the bit setting for
powerBackoff in the hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed."
::= { hdsl2ShdslNotifications 10 }
hdsl2ShdsldeviceFault NOTIFICATION-TYPE
OBJECTS
{
hdsl2ShdslEndpointCurrStatus
}
STATUS current
DESCRIPTION
"This notification indicates that the bit setting for
deviceFault in the hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed."
::= { hdsl2ShdslNotifications 11 }
hdsl2ShdsldcContinuityFault NOTIFICATION-TYPE
OBJECTS
{
hdsl2ShdslEndpointCurrStatus
}
STATUS current
DESCRIPTION
"This notification indicates that the bit setting for
dcContinuityFault in the hdsl2ShdslEndpointCurrStatus object
for this endpoint has changed."
::= { hdsl2ShdslNotifications 12 }
hdsl2ShdslconfigInitFailure NOTIFICATION-TYPE OBJECTS { hdsl2ShdslEndpointCurrStatus } STATUS current DESCRIPTION "This notification indicates that the bit setting for configInitFailure in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed."
hdsl2ShdslconfigInitFailure NOTIFICATION-TYPEオブジェクト{hdsl2ShdslEndpointCurrStatus}ステータス現在の説明は「この通知は、このエンドポイントのhdsl2ShdslEndpointCurrStatusオブジェクト内configInitFailureの設定ビットが変更されたことを示しています。」
::= { hdsl2ShdslNotifications 13 }
hdsl2ShdslprotocolInitFailure NOTIFICATION-TYPE
OBJECTS
{
hdsl2ShdslEndpointCurrStatus
}
STATUS current
DESCRIPTION
"This notification indicates that the bit setting for
protocolInitFailure in the hdsl2ShdslEndpointCurrStatus
object for this endpoint has changed."
::= { hdsl2ShdslNotifications 14 }
hdsl2ShdslnoNeighborPresent NOTIFICATION-TYPE
OBJECTS
{
hdsl2ShdslEndpointCurrStatus
}
STATUS current
DESCRIPTION
"This notification indicates that the bit setting for
noNeighborPresent in the hdsl2ShdslEndpointCurrStatus object
for this endpoint has changed."
::= { hdsl2ShdslNotifications 15 }
hdsl2ShdslLocalPowerLoss NOTIFICATION-TYPE
OBJECTS
{
hdsl2ShdslInvVendorID
}
STATUS current
DESCRIPTION
"This notification indicates impending unit failure due to
loss of local power (last gasp)."
::= { hdsl2ShdslNotifications 16 }
-- conformance information --
- 適合情報 -
hdsl2ShdslConformance OBJECT IDENTIFIER ::= { hdsl2ShdslMIB 3 }
hdsl2ShdslGroups OBJECT IDENTIFIER ::=
{ hdsl2ShdslConformance 1 }
hdsl2ShdslCompliances OBJECT IDENTIFIER ::=
{ hdsl2ShdslConformance 2 }
-- agent compliance statements hdsl2ShdslLineMibCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for SNMP entities that implement HDSL2 and SHDSL. The version of SHDSL supported in this compliance statement is g.shdsl.
- エージェントコンプライアンス文hdsl2ShdslLineMibCompliance MODULE-COMPLIANCEステータスが非難された説明「HDSL2とSHDSLを実装するSNMPエンティティのための準拠宣言この準拠宣言でサポートSHDSLのバージョンG.SHDSLです。
**** This compliance statement is deprecated. ****" MODULE MANDATORY-GROUPS { hdsl2ShdslSpanConfGroup, hdsl2ShdslSpanStatusGroup, hdsl2ShdslInventoryGroup, hdsl2ShdslEndpointConfGroup, hdsl2ShdslEndpointCurrGroup, hdsl2Shdsl15MinIntervalGroup, hdsl2Shdsl1DayIntervalGroup, hdsl2ShdslMaintenanceGroup, hdsl2ShdslEndpointAlarmConfGroup, hdsl2ShdslNotificationGroup }
****この準拠宣言は推奨されません。 ****」MODULE MANDATORY-GROUPS {hdsl2ShdslSpanConfGroup、hdsl2ShdslSpanStatusGroup、hdsl2ShdslInventoryGroup、hdsl2ShdslEndpointConfGroup、hdsl2ShdslEndpointCurrGroup、hdsl2Shdsl15MinIntervalGroup、hdsl2Shdsl1DayIntervalGroup、hdsl2ShdslMaintenanceGroup、hdsl2ShdslEndpointAlarmConfGroup、hdsl2ShdslNotificationGroup}
GROUP hdsl2ShdslInventoryShdslGroup DESCRIPTION "Support for this group is only required for implementations supporting SHDSL lines."
GROUP hdsl2ShdslInventoryShdslGroup DESCRIPTION「このグループのサポートは、SHDSLラインをサポートする実装のために必要とされます。」
GROUP hdsl2ShdslSpanShdslStatusGroup DESCRIPTION "Support for this group is only required for implementations supporting SHDSL lines."
GROUP hdsl2ShdslSpanShdslStatusGroup DESCRIPTION「このグループのサポートは、SHDSLラインをサポートする実装のために必要とされます。」
GROUP hdsl2ShdslSpanConfProfileGroup DESCRIPTION "Support for this group is only required for implementations supporting SHDSL lines."
GROUP hdsl2ShdslSpanConfProfileGroup DESCRIPTION「このグループのサポートは、SHDSLラインをサポートする実装のために必要とされます。」
OBJECT hdsl2ShdslSpanConfWireInterface SYNTAX INTEGER { twoWire(1), fourWire(2) } DESCRIPTION "An implementation only has to support the range as applicable for the original g.shdsl specification defined in RFC 3276."
OBJECT hdsl2ShdslSpanConfWireInterface SYNTAX INTEGER {2線（1）、fourWire（2）} DESCRIPTION "実装は、RFC 3276.に定義された元のG.SHDSL仕様の適用可能な範囲をサポートしなければなりません"
OBJECT hdsl2ShdslStatusMaxAttainableLineRate SYNTAX Unsigned32(0..4112000) DESCRIPTION "An implementation only has to support the range as applicable for the original g.shdsl specification defined in RFC 3276."
OBJECT hdsl2ShdslStatusMaxAttainableLineRate構文Unsigned32（0..4112000）DESCRIPTION「実装は、RFC 3276.に定義された元のG.SHDSL指定用として適用可能な範囲をサポートしなければなりません」
OBJECT hdsl2ShdslStatusActualLineRate SYNTAX Unsigned32(0..4112000) DESCRIPTION "An implementation only has to support the range as applicable for the original g.shdsl specification defined in RFC 3276."
OBJECT hdsl2ShdslStatusActualLineRate構文Unsigned32（0..4112000）DESCRIPTION「実装は、RFC 3276.に定義された元のG.SHDSL指定用として適用可能な範囲をサポートしなければなりません」
OBJECT hdsl2ShdslSpanConfMinLineRate SYNTAX Unsigned32(0..4112000) DESCRIPTION "An implementation only has to support the range as applicable for the original g.shdsl specification defined in RFC 3276."
OBJECT hdsl2ShdslSpanConfMinLineRate構文Unsigned32（0..4112000）DESCRIPTION「実装は、RFC 3276.に定義された元のG.SHDSL指定用として適用可能な範囲をサポートしなければなりません」
OBJECT hdsl2ShdslSpanConfMaxLineRate SYNTAX Unsigned32(0..4112000) DESCRIPTION "An implementation only has to support the range as applicable for the original g.shdsl specification defined in RFC 3276."
OBJECT hdsl2ShdslSpanConfMaxLineRate構文Unsigned32（0..4112000）DESCRIPTION「実装は、RFC 3276.に定義された元のG.SHDSL指定用として適用可能な範囲をサポートしなければなりません」
::= { hdsl2ShdslCompliances 1 }
hdsl2GshdslbisLineMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement HDSL2 and SHDSL. The version of SHDSL supported in this compliance statement is g.shdsl.bis." MODULE MANDATORY-GROUPS { hdsl2ShdslSpanConfGroup, hdsl2ShdslSpanStatusGroup, hdsl2ShdslInventoryGroup, hdsl2ShdslEndpointConfGroup, hdsl2ShdslEndpointCurrGroup, hdsl2Shdsl15MinIntervalGroup, hdsl2Shdsl1DayIntervalGroup, hdsl2ShdslMaintenanceGroup, hdsl2ShdslEndpointAlarmConfGroup, hdsl2ShdslNotificationGroup }
hdsl2GshdslbisLineMibCompliance MODULE-COMPLIANCEステータス現在の説明「HDSL2とSHDSLを実装するSNMPエンティティのための準拠宣言。この準拠宣言でサポートSHDSLのバージョンがg.shdsl.bisです。」 MODULE MANDATORY-GROUPS {hdsl2ShdslSpanConfGroup、hdsl2ShdslSpanStatusGroup、hdsl2ShdslInventoryGroup、hdsl2ShdslEndpointConfGroup、hdsl2ShdslEndpointCurrGroup、hdsl2Shdsl15MinIntervalGroup、hdsl2Shdsl1DayIntervalGroup、hdsl2ShdslMaintenanceGroup、hdsl2ShdslEndpointAlarmConfGroup、hdsl2ShdslNotificationGroup}
GROUP hdsl2ShdslInventoryShdslGroup DESCRIPTION "Support for this group is only required for implementations supporting SHDSL lines."
GROUP hdsl2ShdslInventoryShdslGroup DESCRIPTION「このグループのサポートは、SHDSLラインをサポートする実装のために必要とされます。」
GROUP hdsl2ShdslSpanShdslStatusGroup DESCRIPTION "Support for this group is only required for implementations supporting SHDSL lines."
GROUP hdsl2ShdslSpanShdslStatusGroup DESCRIPTION「このグループのサポートは、SHDSLラインをサポートする実装のために必要とされます。」
GROUP hdsl2ShdslSpanConfProfileGroup DESCRIPTION "Support for this group is only required for implementations supporting SHDSL lines."
GROUP hdsl2ShdslSpanConfProfileGroup DESCRIPTION「このグループのサポートは、SHDSLラインをサポートする実装のために必要とされます。」
GROUP hdsl2ShdslWirePairGroup DESCRIPTION "Support for this group is only required for implementations supporting SHDSL lines."
GROUP hdsl2ShdslWirePairGroup DESCRIPTION「このグループのサポートは、SHDSLラインをサポートする実装のために必要とされます。」
GROUP hdsl2ShdslPayloadRateGroup DESCRIPTION "Support for this group is only required for implementations supporting SHDSL lines."
GROUP hdsl2ShdslPayloadRateGroup DESCRIPTION「このグループのサポートは、SHDSLラインをサポートする実装のために必要とされます。」
::= { hdsl2ShdslCompliances 2 }
-- units of conformance --
- 準拠の単位 -
hdsl2ShdslSpanConfGroup OBJECT-GROUP
OBJECTS
{
hdsl2ShdslSpanConfNumRepeaters,
hdsl2ShdslSpanConfProfile,
hdsl2ShdslSpanConfAlarmProfile
}
STATUS current
DESCRIPTION
"This group supports objects for configuring span-related
parameters for HDSL2/SHDSL lines."
::= { hdsl2ShdslGroups 1 }
hdsl2ShdslSpanStatusGroup OBJECT-GROUP OBJECTS
hdsl2ShdslSpanStatusGroupオブジェクト・グループオブジェクト
{
hdsl2ShdslStatusNumAvailRepeaters
}
STATUS current
DESCRIPTION
"This group supports objects for retrieving span-related
status for HDSL2/SHDSL lines."
::= { hdsl2ShdslGroups 2 }
hdsl2ShdslInventoryShdslGroup OBJECT-GROUP
OBJECTS
{
hdsl2ShdslInvTransmissionModeCapability
}
STATUS current
DESCRIPTION
"This group supports objects for retrieving SHDSL-specific
inventory information."
::= { hdsl2ShdslGroups 3 }
hdsl2ShdslSpanShdslStatusGroup OBJECT-GROUP
OBJECTS
{
hdsl2ShdslStatusMaxAttainableLineRate,
hdsl2ShdslStatusActualLineRate,
hdsl2ShdslStatusTransmissionModeCurrent
}
STATUS current
DESCRIPTION
"This group supports objects for retrieving SHDSL-specific
span-related status."
::= { hdsl2ShdslGroups 4 }
hdsl2ShdslInventoryGroup OBJECT-GROUP OBJECTS { hdsl2ShdslInvVendorID, hdsl2ShdslInvVendorModelNumber, hdsl2ShdslInvVendorSerialNumber, hdsl2ShdslInvVendorEOCSoftwareVersion, hdsl2ShdslInvStandardVersion, hdsl2ShdslInvVendorListNumber, hdsl2ShdslInvVendorIssueNumber, hdsl2ShdslInvVendorSoftwareVersion, hdsl2ShdslInvEquipmentCode, hdsl2ShdslInvVendorOther } STATUS current
hdsl2ShdslInventoryGroupオブジェクト・グループオブジェクト{hdsl2ShdslInvVendorID、hdsl2ShdslInvVendorModelNumber、hdsl2ShdslInvVendorSerialNumber、hdsl2ShdslInvVendorEOCSoftwareVersion、hdsl2ShdslInvStandardVersion、hdsl2ShdslInvVendorListNumber、hdsl2ShdslInvVendorIssueNumber、hdsl2ShdslInvVendorSoftwareVersion、hdsl2ShdslInvEquipmentCode、hdsl2ShdslInvVendorOther} STATUS電流
DESCRIPTION
"This group supports objects that provide unit inventory
information about the units in HDSL2/SHDSL lines."
::= { hdsl2ShdslGroups 5 }
hdsl2ShdslEndpointConfGroup OBJECT-GROUP
OBJECTS
{
hdsl2ShdslEndpointCurrAtn
}
STATUS current
DESCRIPTION
"This group supports objects for configuring parameters for
segment endpoints in HDSL2/SHDSL lines."
::= { hdsl2ShdslGroups 6 }
hdsl2ShdslEndpointCurrGroup OBJECT-GROUP
OBJECTS
{
hdsl2ShdslEndpointCurrAtn,
hdsl2ShdslEndpointCurrSnrMgn,
hdsl2ShdslEndpointCurrStatus,
hdsl2ShdslEndpointES,
hdsl2ShdslEndpointSES,
hdsl2ShdslEndpointCRCanomalies,
hdsl2ShdslEndpointLOSWS,
hdsl2ShdslEndpointUAS,
hdsl2ShdslEndpointCurr15MinTimeElapsed,
hdsl2ShdslEndpointCurr15MinES,
hdsl2ShdslEndpointCurr15MinSES,
hdsl2ShdslEndpointCurr15MinCRCanomalies,
hdsl2ShdslEndpointCurr15MinLOSWS,
hdsl2ShdslEndpointCurr15MinUAS,
hdsl2ShdslEndpointCurr1DayTimeElapsed,
hdsl2ShdslEndpointCurr1DayES,
hdsl2ShdslEndpointCurr1DaySES,
hdsl2ShdslEndpointCurr1DayCRCanomalies,
hdsl2ShdslEndpointCurr1DayLOSWS,
hdsl2ShdslEndpointCurr1DayUAS
}
STATUS current
DESCRIPTION
"This group supports objects that provide current status and
performance measurements relating to segment endpoints in
HDSL2/SHDSL lines."
::= { hdsl2ShdslGroups 7 }
hdsl2Shdsl15MinIntervalGroup OBJECT-GROUP
hdsl2Shdsl15MinIntervalGroupのOBJECT-GROUP
OBJECTS
{
hdsl2Shdsl15MinIntervalES,
hdsl2Shdsl15MinIntervalSES,
hdsl2Shdsl15MinIntervalCRCanomalies,
hdsl2Shdsl15MinIntervalLOSWS,
hdsl2Shdsl15MinIntervalUAS
}
STATUS current
DESCRIPTION
"This group supports objects that maintain historic
performance measurements relating to segment endpoints in
HDSL2/SHDSL lines in 15-minute intervals."
::= { hdsl2ShdslGroups 8 }
hdsl2Shdsl1DayIntervalGroup OBJECT-GROUP
OBJECTS
{
hdsl2Shdsl1DayIntervalMoniSecs,
hdsl2Shdsl1DayIntervalES,
hdsl2Shdsl1DayIntervalSES,
hdsl2Shdsl1DayIntervalCRCanomalies,
hdsl2Shdsl1DayIntervalLOSWS,
hdsl2Shdsl1DayIntervalUAS
}
STATUS current
DESCRIPTION
"This group supports objects that maintain historic
performance measurements relating to segment endpoints in
HDSL2/SHDSL lines in 1-day intervals."
::= { hdsl2ShdslGroups 9 }
hdsl2ShdslMaintenanceGroup OBJECT-GROUP
OBJECTS
{
hdsl2ShdslMaintLoopbackConfig,
hdsl2ShdslMaintTipRingReversal,
hdsl2ShdslMaintPowerBackOff,
hdsl2ShdslMaintSoftRestart,
hdsl2ShdslMaintLoopbackTimeout,
hdsl2ShdslMaintUnitPowerSource
}
STATUS current
DESCRIPTION
"This group supports objects that provide support for
maintenance actions for HDSL2/SHDSL lines."
::= { hdsl2ShdslGroups 10 }
hdsl2ShdslEndpointAlarmConfGroup OBJECT-GROUP
OBJECTS
{
hdsl2ShdslEndpointAlarmConfProfile,
hdsl2ShdslEndpointThreshLoopAttenuation,
hdsl2ShdslEndpointThreshSNRMargin,
hdsl2ShdslEndpointThreshES,
hdsl2ShdslEndpointThreshSES,
hdsl2ShdslEndpointThreshCRCanomalies,
hdsl2ShdslEndpointThreshLOSWS,
hdsl2ShdslEndpointThreshUAS,
hdsl2ShdslEndpointAlarmConfProfileRowStatus
}
STATUS current
DESCRIPTION
"This group supports objects that allow configuration of alarm
thresholds for various performance parameters for HDSL2/SHDSL
lines."
::= { hdsl2ShdslGroups 11 }
hdsl2ShdslNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
hdsl2ShdslLoopAttenCrossing,
hdsl2ShdslSNRMarginCrossing,
hdsl2ShdslPerfESThresh,
hdsl2ShdslPerfSESThresh,
hdsl2ShdslPerfCRCanomaliesThresh,
hdsl2ShdslPerfLOSWSThresh,
hdsl2ShdslPerfUASThresh,
hdsl2ShdslSpanInvalidNumRepeaters,
hdsl2ShdslLoopbackFailure,
hdsl2ShdslpowerBackoff,
hdsl2ShdsldeviceFault,
hdsl2ShdsldcContinuityFault,
hdsl2ShdslconfigInitFailure,
hdsl2ShdslprotocolInitFailure,
hdsl2ShdslnoNeighborPresent,
hdsl2ShdslLocalPowerLoss
}
STATUS current
DESCRIPTION
"This group supports notifications of significant conditions
associated with HDSL2/SHDSL lines."
::= { hdsl2ShdslGroups 12 }
hdsl2ShdslSpanConfProfileGroup OBJECT-GROUP OBJECTS
hdsl2ShdslSpanConfProfileGroupオブジェクト・グループオブジェクト
{
hdsl2ShdslSpanConfWireInterface,
hdsl2ShdslSpanConfMinLineRate,
hdsl2ShdslSpanConfMaxLineRate,
hdsl2ShdslSpanConfPSD,
hdsl2ShdslSpanConfTransmissionMode,
hdsl2ShdslSpanConfRemoteEnabled,
hdsl2ShdslSpanConfPowerFeeding,
hdsl2ShdslSpanConfCurrCondTargetMarginDown,
hdsl2ShdslSpanConfWorstCaseTargetMarginDown,
hdsl2ShdslSpanConfCurrCondTargetMarginUp,
hdsl2ShdslSpanConfWorstCaseTargetMarginUp,
hdsl2ShdslSpanConfUsedTargetMargins,
hdsl2ShdslSpanConfReferenceClock,
hdsl2ShdslSpanConfLineProbeEnable,
hdsl2ShdslSpanConfProfileRowStatus
}
STATUS current
DESCRIPTION
"This group supports objects that constitute configuration
profiles for configuring span-related parameters in SHDSL
lines."
::= { hdsl2ShdslGroups 13 }
hdsl2ShdslWirePairGroup OBJECT-GROUP
OBJECTS
{
hdsl2ShdslEndpointCurrTipRingReversal,
hdsl2ShdslEndpointCurrActivationState
}
STATUS current
DESCRIPTION
"This group supports objects that provide the status
of SHDSL-specific wire pairs."
::= { hdsl2ShdslGroups 14 }
hdsl2ShdslPayloadRateGroup OBJECT-GROUP
OBJECTS
{
hdsl2ShdslStatusMaxAttainablePayloadRate,
hdsl2ShdslStatusActualPayloadRate
}
STATUS current
DESCRIPTION
"This group supports objects for retrieving payload rates
that exclude any framing overhead."
::= { hdsl2ShdslGroups 15 }
END
終わり
A management application that supports RFC 3276 could mistakenly flag a unit that responds with a rate or wire pair that exceeds the ranges and/or enumerations specified in RFC 3276. For example, a G.shdsl.bis line with four wire pairs would report statistics for wire pairs that do not exist in RFC 3276. That is, a GET-NEXT request issues with the object identifier:
RFC 3276をサポートする管理アプリケーションは、例えばRFC 3276.に指定された範囲および/または列挙を超える速度またはワイヤ対を応答部フラグ誤っ可能性は、4つのワイヤ対を有するG.shdsl.bisライン統計情報を報告しますRFC、オブジェクト識別子とGET-NEXT要求の問題である3276.には存在しないのワイヤのペアのために：
hdsl2ShdslEndpointCurrAtn.1.1.1.2
hdsl2ShdslEndpointCurrAtn.1.1.1.2
might return
返すことがあります
hdsl2ShdslEndpointCurrAtn.1.1.1.3 = 0
hdsl2ShdslEndpointCurrAtn.1.1.1.3 = 0
with a G.shdsl.bis unit and
G.shdsl.bisユニットとし、
hdsl2ShdslEndpointCurrSnrMgn.1.1.1.1 = 0
hdsl2ShdslEndpointCurrSnrMgn.1.1.1.1 = 0
with an HDSL2 unit as these objects are indexed by
これらのオブジェクトはによって索引付けされるHDSL2ユニットと
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslendpointSide, hdsl2ShdslEndpointWirePair }
INDEX {ifIndexの、hdsl2ShdslInvIndex、hdsl2ShdslendpointSide、hdsl2ShdslEndpointWirePair}
A management application intended to manage G.shdsl.bis agents SHOULD be modified to accept this sequence.
G.shdsl.bisエージェントを管理することを目的と管理アプリケーションは、この順序を受け入れるように変更する必要があります。
One should note that this same unmodified management application is still capable of managing G.shdsl.bis agents albeit to the degree of G.SHDSL (non-bis) limitations. That is, it can create and monitor configurations limited to two wire pairs with an upper-rate limit of 4112000 bits/second.
一つは、この同じ修飾されていない管理アプリケーションがまだG.SHDSL（非ビス）の制限の程度にもかかわらずG.shdsl.bisエージェントを管理することが可能であることに注意すべきです。すなわち、4112000ビット/秒の上側レート制限を有する2つのワイヤ対に限ら構成を作成し、監視することができ、です。
There are a number of management objects defined in this MIB module with a MAX-ACCESS clause of read-write and/or read-create. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations. These are the tables and objects and their sensitivity/vulnerability: o hdsl2ShdslSpanConfTable
読み書きおよび/またはリード作成のMAX-ACCESS句でこのMIBモジュールで定義された管理オブジェクトの数があります。そのようなオブジェクトは、いくつかのネットワーク環境に敏感又は脆弱と考えることができます。適切な保護のない非安全な環境におけるSET操作のサポートはネットワーク操作のときにマイナスの影響を与える可能性があります。 hdsl2ShdslSpanConfTable O：これらは、テーブルと、オブジェクトとそれらの感度/脆弱性です
The table consists of the following objects that support SET operations:
テーブルには、SET操作をサポートし、次のオブジェクトで構成されています。
* hdsl2ShdslSpanConfNumRepeaters * hdsl2ShdslSpanConfProfile * hdsl2ShdslSpanConfAlarmProfile
* hdsl2ShdslSpanConfNumRepeaters * hdsl2ShdslSpanConfProfile * hdsl2ShdslSpanConfAlarmProfile
Unauthorized changes to hdsl2ShdslSpanConfNumRepeaters could result in an hdsl2ShdslSpanInvalidNumRepeaters notification. Note the discussion on hdsl2ShdslSpanInvalidNumRepeaters in the Notifications section above.
hdsl2ShdslSpanConfNumRepeatersへの不正な変更がhdsl2ShdslSpanInvalidNumRepeaters通知につながる可能性があります。上記の通知]セクションでhdsl2ShdslSpanInvalidNumRepeatersに関する議論に注意してください。
Unauthorized changes to hdsl2ShdslSpanConfProfile could have an adverse operational effect on a span. Reference the hdsl2ShdslSpanConfProfileTable discussion below.
hdsl2ShdslSpanConfProfileへの不正な変更は、スパンに悪作用効果を持つことができます。以下hdsl2ShdslSpanConfProfileTableの議論を参照。
Unauthorized changes to hdsl2ShdslSpanConfAlarmProfile could have a contrary effect on notifications. Reference the hdsl2ShdslEndpointAlarmConfProfileTable discussion below.
hdsl2ShdslSpanConfAlarmProfileへの不正な変更は、通知に反する影響を与える可能性があります。以下hdsl2ShdslEndpointAlarmConfProfileTableの議論を参照。
o hdsl2ShdslEndpointConfTable
O hdsl2ShdslEndpointConfTable
This table contains one object, hdsl2ShdslEndpointAlarmConfProfile, that supports SET operations. Unauthorized changes could have an undesirable notifications. Reference the hdsl2ShdslEndpointAlarmConfProfileTable discussion below.
この表は、SET操作をサポートして一つのオブジェクト、hdsl2ShdslEndpointAlarmConfProfileが含まれています。不正な変更は望ましくない通知を持つことができます。以下hdsl2ShdslEndpointAlarmConfProfileTableの議論を参照。
o hdsl2ShdslEndpointMaintTable
O hdsl2ShdslEndpointMaintTable
The table consists of the following objects that support SET operations:
テーブルには、SET操作をサポートし、次のオブジェクトで構成されています。
* hdsl2ShdslMaintLoopbackConfig * hdsl2ShdslMaintPowerBackoff * hdsl2ShdslMaintSoftRestart
* hdsl2ShdslMaintLoopbackConfig * hdsl2ShdslMaintPowerBackoff * hdsl2ShdslMaintSoftRestart
Unauthorized changes to hdsl2ShdslMaintLoopbackConfig could prevent end-to-end data transfer due to an activation of a loopback.
hdsl2ShdslMaintLoopbackConfigに不正な変更は、ループバックの活性化によるエンド・ツー・エンドのデータ転送を防ぐことができます。
Unauthorized changes to hdsl2ShdslMaintPowerBackoff could result in an increased in bundle interference.
hdsl2ShdslMaintPowerBackoffへの不正な変更は、バンドル干渉に増加につながる可能性があります。
Unauthorized changes to hdsl2ShdslMaintSoftRestart could result in a temporary interruption of end-to-end data transfer as the result of the triggering of a soft restart.
hdsl2ShdslMaintSoftRestartへの不正な変更は、ソフトの再起動のトリガの結果として、エンド・ツー・エンドのデータ転送の一時的な中断につながる可能性があります。
o hdsl2ShdslUnitMaintTable
またはhdsl2ShdslUnitMaintTable
This table contains one object, hdsl2ShdslMaintLoopbackTimeout, that supports SET operations. An unauthorized change to this object could result in the timeout value for loopbacks being increased, decreased, or disabled.
この表は、SET操作をサポートして一つのオブジェクト、hdsl2ShdslMaintLoopbackTimeoutが含まれています。ループバックのタイムアウト値につながる可能性が、このオブジェクトへの不正な変更は、増加減少、または無効にされています。
o hdsl2ShdslSpanConfProfileTable
O hdsl2ShdslSpanConfProfileTable
The table consists of the following objects that support SET operations:
テーブルには、SET操作をサポートし、次のオブジェクトで構成されています。
* hdsl2ShdslSpanConfWireInterface * hdsl2ShdslSpanConfMinLineRate * hdsl2ShdslSpanConfMaxLineRate * hdsl2ShdslSpanConfPSD * hdsl2ShdslSpanConfTransmissionMode * hdsl2ShdslSpanConfRemoteEnabled * hdsl2ShdslSpanConfPowerFeeding * hdsl2ShdslSpanConfCurrCondTargetMarginDown * hdsl2ShdslSpanConfWorstCaseTargetMarginDown * hdsl2ShdslSpanConfCurrCondTargetMarginUp * hdsl2ShdslSpanConfWorstCaseTargetMarginUp * hdsl2ShdslSpanConfUsedTargetMargins * hdsl2ShdslSpanConfReferenceClock * hdsl2ShdslSpanConfLineProbeEnable * hdsl2ShdslSpanConfProfileRowStatus
* hdsl2ShdslSpanConfWireInterface * hdsl2ShdslSpanConfMinLineRate * hdsl2ShdslSpanConfMaxLineRate * hdsl2ShdslSpanConfPSD * hdsl2ShdslSpanConfTransmissionMode * hdsl2ShdslSpanConfRemoteEnabled * hdsl2ShdslSpanConfPowerFeeding * hdsl2ShdslSpanConfCurrCondTargetMarginDown * hdsl2ShdslSpanConfWorstCaseTargetMarginDown * hdsl2ShdslSpanConfCurrCondTargetMarginUp * hdsl2ShdslSpanConfWorstCaseTargetMarginUp * hdsl2ShdslSpanConfUsedTargetMargins * hdsl2ShdslSpanConfReferenceClock * hdsl2ShdslSpanConfLineProbeEnable * hdsl2ShdslSpanConfProfileRowStatus
Setting any of the objects to an incorrect value could have an adverse operational effect on a span.
不正な値にオブジェクトのいずれかを設定すると、スパンに悪作用効果を持つことができます。
Unauthorized changes to the hdsl2ShdslSpanConfWireInterface could result in the failure of a span to achieve activation to a state that would permit data flow. For example, setting this object to six-wire or eight-wire operation when one of the units in the span only supports two-wire or four-wire operation would likely prevent an expected end-to-end data transfer capability.
hdsl2ShdslSpanConfWireInterfaceへの不正な変更は、データの流れを可能にする状態に活性化を達成するためにスパンの故障につながる可能性があります。例えば、スパン内のユニットの一方のみが2線式または4線式の演算をサポートする場合六ワイヤまたは8ワイヤ操作にこのオブジェクトを設定する可能性が予想されるエンド・ツー・エンドのデータ転送能力を妨げます。
Unauthorized changes to hdsl2ShdslSpanConfMinLineRate or hdsl2ShdslSpanConfMaxLineRate could have an adverse effect on performance. The range of allowable line rates could be altered such that the span may not be able to train to a line rate that would permit any end-user data to traverse the span or the span could train to a line rate that is either greater than or less than the line rate that the provider has pledged.
hdsl2ShdslSpanConfMinLineRateまたはhdsl2ShdslSpanConfMaxLineRateへの不正な変更がパフォーマンスに悪影響を及ぼす可能性があります。許容可能な回線速度の範囲は、スパンスパンを横断する任意のエンドユーザデータを可能にするか、スパンよりも大きいかのいずれかである回線速度に訓練することができ、ライン速度に訓練することができないかもしれないように変更することができますプロバイダが約束したラインレートよりも小さいです。
Unauthorized changes to hdsl2ShdslSpanConfPSD or hdsl2ShdslSpanConfTransmissionMode could have a detrimental effect on loop reach, performance, or spectral compatibility.
hdsl2ShdslSpanConfPSDまたはhdsl2ShdslSpanConfTransmissionModeへの不正な変更は、ループリーチ、パフォーマンス、またはスペクトル適合性に悪影響を与える可能性があります。
Unauthorized changes to hdsl2ShdslSpanConfRemoteEnable could alter the remote management ability of units.
hdsl2ShdslSpanConfRemoteEnableへの不正な変更は、ユニットのリモート管理機能を変更することができます。
Unauthorized changes to hdsl2ShdslSpanConfPowerFeeding could shutdown units that are expected to be fed power remotely. Changing the configuration such that wetting current is not supplied may result in corrosion of electrical contacts.
hdsl2ShdslSpanConfPowerFeedingへの不正な変更が予想され、シャットダウンユニットは、リモートから電源を供給することができました。電流が供給されていない湿潤剤は、電気接点の腐食をもたらすことができるように構成を変更します。
Unauthorized changes to hdsl2ShdslSpanConfCurrCondTargetMarginDown, hdsl2ShdslSpanConfWorstCaseTargetMarginDown, hdsl2ShdslSpanConfCurrCondTargetMarginUp, hdsl2ShdslSpanConfWorstCaseTargetMarginUp, or hdsl2ShdslSpanConfUsedTargetMargins could result in invalid parameters used to determine if a data rate can be supported under current and worst-case noise.
hdsl2ShdslSpanConfCurrCondTargetMarginDown、hdsl2ShdslSpanConfWorstCaseTargetMarginDown、hdsl2ShdslSpanConfCurrCondTargetMarginUp、hdsl2ShdslSpanConfWorstCaseTargetMarginUp、又はhdsl2ShdslSpanConfUsedTargetMarginsに不正な変更は、データレートが現在とワーストケースノイズでサポートすることができるかどうかを決定するために使用される無効なパラメータをもたらす可能性があります。
Unauthorized changes to hdsl2ShdslSpanConfReferenceClock could result in the selection of a clock source that might either prevent any data from being transferred or impair data transfer. In addition, an increase in CRC anomalies may be experienced.
hdsl2ShdslSpanConfReferenceClockへの不正な変更が転送されてから任意のデータを防止したり、データ転送を損なう可能性があるいずれかのクロックソースの選択につながる可能性があります。また、CRC異常の増加が経験することができます。
Unauthorized changes to hdsl2ShdslSpanConfLineProbeEnable could have a negative effect on selecting the optimum rate or power level based on current line conditions.
hdsl2ShdslSpanConfLineProbeEnableへの不正な変更は、現在の回線状況に基づいて最適なレートまたは電力レベルを選択するに悪影響を与える可能性があります。
Unauthorized changes to row status could result in unwanted profiles being created or brought into service. Also, changes to the row status could result in profiles being inadvertently deleted or taken out of service.
不要なプロファイルをもたらす可能性が行ステータスへの不正な変更は、作成またはサービスに持ち込まれます。また、ロウ状態に変化が誤って削除またはサービスから取り出されているプロファイルをもたらす可能性があります。
o hdsl2ShdslEndpointAlarmConfProfileTable
hdsl2ShdslEndpointAlarmConfProfileTable上
The table consists of the following objects that support SET operations:
テーブルには、SET操作をサポートし、次のオブジェクトで構成されています。
* hdsl2ShdslEndpointThreshLoopAttenuation * hdsl2ShdslEndpointThreshSNRMargin * hdsl2ShdslEndpointThreshES * hdsl2ShdslEndpointThreshSES
* hdsl2ShdslEndpointThreshLoopAttenuation * hdsl2ShdslEndpointThreshSNRMargin * hdsl2ShdslEndpointThreshES * hdsl2ShdslEndpointThreshSES
* hdsl2ShdslEndpointThreshCRCanomalies * hdsl2ShdslEndpointThreshLOSWS * hdsl2ShdslEndpointThreshUAS * hdsl2ShdslEndpointAlarmConfProfileRowStatus
* hdsl2ShdslEndpointThreshCRCanomalies * hdsl2ShdslEndpointThreshLOSWS * hdsl2ShdslEndpointThreshUAS * hdsl2ShdslEndpointAlarmConfProfileRowStatus
Increasing any of the threshold values could result in a notification being suppressed or deferred. Setting a threshold to 0 could result in a notification being suppressed. Suppressing or deferring a notification could prevent the timely delivery of important diagnostic information. Decreasing any of the threshold values could result in a notification being sent from the network falsely reporting a threshold crossing.
閾値のいずれかを増加させることを抑制または遅延され、通知が生じる可能性があります。 0に閾値を設定することが抑制され、通知が生じる可能性があります。抑制または通知を延期することは重要な診断情報のタイムリーな配信を防ぐことができます。閾値のいずれかを減少させると誤ってしきい値交差を報告し、ネットワークから送信される通知につながる可能性があります。
Changing a threshold value could also have an impact on the amount of notifications the agent sends. This document adds a paragraph, which was not in RFC 3276 [RFC3276], to the Notifications section that provides general guidance to the rate limiting of notifications. Agent implementations not adhering to the rate-limiting desires could result in notifications being generated at an uncontrolled rate. Unauthorized changes to a threshold value could result in an undesired notification rate.
しきい値を変更すると、エージェントが送信した通知の量に影響を与える可能性があります。この文書は、通知のレート制限の一般的なガイダンスを提供して通知]セクションに、RFC 3276ではありませんでした段落、[RFC3276]を追加します。レート制限の欲望に付着していないエージェントの実装が制御不能レートで生成された通知につながる可能性があります。しきい値への不正な変更は、望ましくない通知率につながる可能性があります。
Unauthorized changes to row status could result in unwanted profiles being created or brought into service. Also, changes to the row status could result in profiles being inadvertently deleted or taken out of service.
不要なプロファイルをもたらす可能性が行ステータスへの不正な変更は、作成またはサービスに持ち込まれます。また、ロウ状態に変化が誤って削除またはサービスから取り出されているプロファイルをもたらす可能性があります。
Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over the network via SNMP. These are the tables and objects and their sensitivity/vulnerability:
このMIBモジュールで読み取り可能なオブジェクトの一部（すなわち、アクセス可能ではない以外MAX-ACCESS持つオブジェクト）は、いくつかのネットワーク環境に敏感又は脆弱と考えることができます。 GETおよび/またはこれらのオブジェクトへのアクセスを通知し、おそらくSNMPを通してネットワークの上にそれらを送信する場合でも、これらのオブジェクトの値を暗号化するためにも、制御することが重要です。これらは、テーブルと、オブジェクトとそれらの感度/脆弱性です：
o hdsl2ShdslInventoryTable
お ｈｄｓｌ２Ｓｈｄｓぃんゔぇんとｒｙたｂぇ
Access to these objects would allow an intruder to obtain information about which vendor's equipment is in use on the network. Further, such information is considered sensitive in many environments for competitive reasons.
これらのオブジェクトへのアクセスは、侵入者がベンダーの機器がネットワーク上で使用されているかについての情報を得ることができるようになります。さらに、そのような情報は、競争上の理由のために多くの環境に敏感であると考えています。
* hdsl2ShdslInvVendorID * hdsl2ShdslInvVendorModelNumber * hdsl2ShdslInvVendorSerialNumber * hdsl2ShdslInvVendorEOCSoftwareVersion * hdsl2ShdslInvStandardVersion * hdsl2ShdslInvVendorListNumber
* hdsl2ShdslInvVendorID * hdsl2ShdslInvVendorModelNumber * hdsl2ShdslInvVendorSerialNumber * hdsl2ShdslInvVendorEOCSoftwareVersion * hdsl2ShdslInvStandardVersion * hdsl2ShdslInvVendorListNumber
* hdsl2ShdslInvVendorIssueNumber * hdsl2ShdslInvVendorSoftwareVersion * hdsl2ShdslInvEquipmentCode * hdsl2ShdslInvVendorOther * hdsl2ShdslInvTransmissionModeCapability
* hdsl2ShdslInvVendorIssueNumber * hdsl2ShdslInvVendorSoftwareVersion * hdsl2ShdslInvEquipmentCode * hdsl2ShdslInvVendorOther * hdsl2ShdslInvTransmissionModeCapability
SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module.
SNMPv3の前のSNMPバージョンは十分なセキュリティを含んでいませんでした。ネットワーク自体が（IPsecを使って、例えば）安全であっても、その後も、安全なネットワーク上で/ SETにアクセスし、GETだれに許容されているかのように何の制御（読み取り/変更/作成/削除）この内のオブジェクトが存在しませんMIBモジュール。
It is RECOMMENDED that implementers consider the security features as provided by the SNMPv3 framework (see [RFC3410], Section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy).
実装者がSNMPv3フレームワークで提供するようにセキュリティ機能を考えることが推奨される（認証とプライバシーのため）SNMPv3の暗号のメカニズムのためのフルサポートを含む、（、[RFC3410]のセクション8を参照）。
Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them.
さらに、SNMPv3の前のSNMPバージョンの展開はお勧めしません。代わりに、SNMPv3を展開すると、暗号化セキュリティを有効にすることをお勧めします。このMIBモジュールのインスタンスへのアクセスを与えるSNMP実体が適切にのみプリンシパル（ユーザ）にオブジェクトへのアクセスを提供するように設定されていることを確認するために、顧客/オペレータ責任実際にGETまたはSET（変化への正当な権利を有することです/）/削除、それらを作成します。
The authors are deeply grateful to the authors of the ADSL LINE MIB (RFC 2662 [RFC2662]), Gregory Bathrick and Faye Ly, as much of the text and structure of this document originate in their documents.
著者はADSL回線MIB（RFC 2662 [RFC2662]）の著者、グレゴリーBathrickとフェイLyのに深く感謝しており、この文書のテキストおよび構造の限りは、その文書に由来します。
The authors are also grateful to the authors of FR MFR MIB (RFC 3020 [RFC3020]), Prayson Pate, Bob Lynch, and Kenneth Rehbehn, as the majority of the Security Considerations section was lifted from their document.
Security Considerations部の大部分がその文書から持ち上げたとして著者は、また、FR MFR MIB（RFC 3020 [RFC3020]）、Praysonパテ、ボブ・リンチ、およびケネスRehbehnの作者に感謝しています。
The authors also acknowledge the importance of the contributions and suggestions regarding interface indexing structures received from David Horton of CITR.
著者らはまた、CITRのデビッド・ホートンから受信したインタフェースのインデックス構造に関する貢献と提案の重要性を認識しています。
The authors are extremely thankful to Bert Wijnen, Randy Presuhn, and C. M. Heard for their extensive review and the many suggestions they provided.
著者は、彼らの大規模な見直しと、彼らが提供する多くの提案のためバートWijnen、ランディPresuhn、およびC. M.聞いたに非常に感謝しています。
Other contributions were received from the following:
その他の貢献は以下から受け取りました。
Matt Beanland (Extel Communications)
Philip Bergstresser (Adtran)
Steve Blackwell (Centillium)
Umberto Bonollo (NEC Australia)
John Egan (Metalink BroadBand)
Yagal Hachmon (RAD)
Mark Johnson (Red Point)
Sharon Mantin (Orckit)
Moti Morgenstern (ECI)
Raymond Murphy (Ericsson)
Lee Nipper (Verilink)
Randy Presuhn (BMC Software)
Katy Sherman (Orckit)
Mike Sneed (ECI)
Jon Turney (DSL Solutions)
Aron Wahl (Memotec)
Bert Wijnen (Lucent)
Jim Wilson (for Mindspeed)
Michael Wrobel (Memotec)
[G.991.2] Blackwell, S., "Single-Pair High-Speed Digital Subscriber Line (SHDSL) Transceivers", ITU-T G.991.2, December 2003.
[G.991.2]ブラックウェル、S.、 "シングルペア高速デジタル加入者線（SHDSL）トランシーバ"、ITU-T G.991.2、2003年12月。
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2119]ブラドナーの、S.、 "要件レベルを示すためにRFCsにおける使用のためのキーワード"、BCP 14、RFC 2119、1997年3月。
[RFC2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2578] McCloghrie、K.、パーキンス、D.、およびJ. Schoenwaelder、STD 58、RFC 2578、1999年4月 "管理情報バージョン2（SMIv2）の構造"。
[RFC2579] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999.
[RFC2579] McCloghrie、K.、パーキンス、D.、およびJ. Schoenwaelder、 "SMIv2のためのテキストの表記法"、STD 58、RFC 2579、1999年4月。
[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999.
[RFC2580] McCloghrie、K.、パーキンス、D.、およびJ. Schoenwaelder、 "SMIv2のための適合性宣言"、STD 58、RFC 2580、1999年4月。
[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group MIB", RFC 2863, June 2000.
[RFC2863] McCloghrie、K.およびF. Kastenholzと、 "インターフェイスグループMIB"、RFC 2863、2000年6月。
[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks", STD 62, RFC 3411, December 2002.
[RFC3411]ハリントン、D.、Presuhn、R.、およびB. Wijnenの、 "簡易ネットワーク管理プロトコル（SNMP）管理フレームワークを記述するためのアーキテクチャ"、STD 62、RFC 3411、2002年12月。
[RFC3593] Tesink, K., "Textual Conventions for MIB Modules Using Performance History Based on 15 Minute Intervals", RFC 3593, September 2003.
[RFC3593] Tesink、K.、RFC 3593、2003年9月 "15分間隔に基づいて、パフォーマンス履歴を使用してMIBモジュールのためのテキストの表記法"。
[T1E1.4] American National Standards Institute, "ANSI T1E1.4/2000- 006", February 2000.
[T1E1.4]米国規格協会、 "ANSI T1E1.4 / 2000〜006"、2000年2月。
[RFC2662] Bathrick, G. and F. Ly, "Definitions of Managed Objects for the ADSL Lines", RFC 2662, August 1999.
[RFC2662] Bathrick、G.およびF. Lyの、 "ADSLラインのための管理オブジェクトの定義"、RFC 2662、1999年8月。
[RFC3020] Pate, P., Lynch, B., and K. Rehbehn, "Definitions of Managed Objects for Monitoring and Controlling the UNI/NNI Multilink Frame Relay Function", RFC 3020, December 2000.
[RFC3020]パテ、P.、リンチ、B.、およびK. Rehbehn、RFC 3020、2000年12月 "監視およびUNI / NNIマルチリンクフレームリレー機能を制御するための管理オブジェクトの定義"。
[RFC3276] Ray, B. and R. Abbi, "Definitions of Managed Objects for High Bit-Rate DSL - 2nd generation (HDSL2) and Single-Pair High-Speed Digital Subscriber Line (SHDSL) Lines Processing", RFC 3276, May 2002.
[RFC3276]レイ、B.とR.アビー、「高ビットレートのDSLのための管理対象オブジェクトの定義 - 第2世代（HDSL2）とシングルペア高速デジタル加入者線（SHDSL）ライン処理」、RFC 3276、月2002。
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet-Standard Management Framework", RFC 3410, December 2002.
[RFC3410]ケース、J.、マンディ、R.、パーテイン、D.、およびB.スチュワート、 "インターネット標準の管理フレームワークのための序論と適用性声明"、RFC 3410、2002年12月。
[RFC3418] Presuhn, R., "Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)", STD 62, RFC 3418, December 2002.
、STD 62、RFC 3418、2002年12月 "簡易ネットワーク管理プロトコル（SNMP）管理情報ベース（MIB）" [RFC3418] Presuhn、R.、。
Authors' Addresses
著者のアドレス
Clay Sikes Zhone Technologies, Inc. Florida Design Center 8454 126th Ave. N. Largo, FL 33773 US
クレイSikes Zhone Technologies社フロリダデザインセンター8454第126回アベニュー。 N.ラルゴ、フロリダ州33773米国
Phone: +1 727 530 8257 Fax: +1 727 532 5698 EMail: csikes@zhone.com
電話：+1 727 530 8257ファックス：+1 727 532 5698 Eメール：csikes@zhone.com
Bob Ray PESA Switching Systems, Inc. 330-A Wynn Drive Huntsville, AL 35805 US
ボブ・レイPESAスイッチングSystems、Inc.の330-ウィンドライブハンツビル、AL 35805米国
Phone: +1 256 726 9200 ext. 142 Fax: +1 256 726 9271 EMail: rray@pesa.com
電話：+1 256 726 9200内線。 142ファックス：+1 256 726 9271 Eメール：rray@pesa.com
Rajesh Abbi Alcatel USA 2301 Sugar Bush Road Raleigh, NC 27612 US
ラジェッシュアビーアルカテルUSA 2301シュガーブッシュ道路ローリー、ノースカロライナ州27612米国
Phone: +1 919-850-6194 Fax: +1 919-850-6670 EMail: Rajesh.Abbi@alcatel.com
電話：+1 919-850-6194ファックス：+1 919-850-6670電子メール：Rajesh.Abbi@alcatel.com
Full Copyright Statement
完全な著作権声明
Copyright (C) The Internet Society (2005).
著作権（C）インターネット協会（2005）。
This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
この文書では、BCP 78に含まれる権利と許可と制限の適用を受けており、その中の記載を除いて、作者は彼らのすべての権利を保有します。
This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
この文書とここに含まれている情報は、基礎とCONTRIBUTOR「そのまま」、ORGANIZATION HE / SHEが表すまたはインターネットソサエティおよびインターネット・エンジニアリング・タスク・フォース放棄すべての保証、明示または、（もしあれば）後援ISに設けられています。黙示、情報の利用は、特定の目的に対する権利または商品性または適合性の黙示の保証を侵害しない任意の保証含むがこれらに限定されません。
Intellectual Property
知的財産
The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.
IETFは、本書またはそのような権限下で、ライセンスがたりないかもしれない程度に記載された技術の実装や使用に関係すると主張される可能性があります任意の知的財産権やその他の権利の有効性または範囲に関していかなる位置を取りません利用可能です。またそれは、それがどのような権利を確認する独自の取り組みを行ったことを示すものでもありません。 RFC文書の権利に関する手続きの情報は、BCP 78およびBCP 79に記載されています。
Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.
IPRの開示のコピーが利用できるようにIETF事務局とライセンスの保証に行われた、または本仕様の実装者または利用者がそのような所有権の使用のための一般的なライセンスまたは許可を取得するために作られた試みの結果を得ることができますhttp://www.ietf.org/iprのIETFのオンラインIPRリポジトリから。
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org.
IETFは、その注意にこの標準を実装するために必要とされる技術をカバーすることができる任意の著作権、特許または特許出願、またはその他の所有権を持ってすべての利害関係者を招待します。 ietf-ipr@ietf.orgのIETFに情報を記述してください。
Acknowledgement
謝辞
Funding for the RFC Editor function is currently provided by the Internet Society.
RFC Editor機能のための基金は現在、インターネット協会によって提供されます。