Network Working Group                                          D. Nelson
Request for Comments: 4668                            Enterasys Networks
Obsoletes: 2618                                              August 2006
Category: Standards Track
        
               RADIUS Authentication Client MIB for IPv6
        

Status of This Memo

このメモのステータス

This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.

この文書は、インターネットコミュニティのためのインターネット標準トラックプロトコルを指定し、改善のための議論と提案を要求します。このプロトコルの標準化状態と状態への「インターネット公式プロトコル標準」(STD 1)の最新版を参照してください。このメモの配布は無制限です。

Copyright Notice

著作権表示

Copyright (C) The Internet Society (2006).

著作権(C)インターネット協会(2006)。

Abstract

抽象

This memo defines a set of extensions that instrument RADIUS authentication client functions. These extensions represent a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. Using these extensions, IP-based management stations can manage RADIUS authentication clients.

このメモはその楽器RADIUS認証クライアントの機能を拡張セットを定義します。これらの拡張機能は、インターネットコミュニティでのネットワーク管理プロトコルで使用するための管理情報ベース(MIB)の一部を表します。これらの拡張機能を使用して、IPベースの管理局はRADIUS認証クライアントを管理することができます。

This memo obsoletes RFC 2618 by deprecating the MIB table containing IPv4-only address formats and defining a new table to add support for version-neutral IP address formats. The remaining MIB objects from RFC 2618 are carried forward into this document. The memo also adds UNITS and REFERENCE clauses to selected objects.

このメモはIPv4のみのアドレス形式を含むMIBテーブルを非推奨とバージョン中立のIPアドレス形式のサポートを追加する新しいテーブルを定義することによって、RFC 2618を廃止します。 RFC 2618からの残りのMIBオブジェクトは、この文書に引き継がれています。メモはまた、選択したオブジェクトにUNITSとREFERENCE句を追加します。

Table of Contents

目次

   1. Introduction ....................................................3
   2. Terminology .....................................................3
   3. The Internet-Standard Management Framework ......................3
   4. Scope of Changes ................................................3
   5. Structure of the MIB Module .....................................4
   6. Deprecated Objects ..............................................5
   7. Definitions .....................................................5
   8. Security Considerations ........................................20
   9. References .....................................................22
      9.1. Normative References ......................................22
      9.2. Informative References ....................................22
   Appendix A. Acknowledgements ......................................23
        
1. Introduction
1. はじめに

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. The objects defined within this memo relate to the Remote Authentication Dial-In User Service (RADIUS) Authentication Client as defined in RFC 2865 [RFC2865].

このメモは、インターネットコミュニティでのネットワーク管理プロトコルで使用するための管理情報ベース(MIB)の一部を定義します。 RFC 2865で定義されるように、このメモの中に定義されたオブジェクトは、[RFC2865]リモート認証ダイヤルインユーザーサービス(RADIUS)認証クライアントに関する。

2. Terminology
2.用語

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].

この文書のキーワード "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", および "OPTIONAL" はRFC 2119 [RFC2119]に記載されているように解釈されます。

This document uses terminology from RFC 2865 [RFC2865].

この文書は、RFC 2865 [RFC2865]から用語を使用しています。

This document uses the word "malformed" with respect to RADIUS packets, particularly in the context of counters of "malformed packets". While RFC 2865 does not provide an explicit definition of "malformed", malformed generally means that the implementation has determined the packet does not match the format defined in RFC 2865. Some implementations may determine that packets are malformed when the Vendor Specific Attribute (VSA) format does not follow the RFC 2865 recommendations for VSAs. Those implementations are used in deployments today, and thus set the de facto definition of "malformed".

この文書では、特に「不正な形式のパケット」のカウンターの文脈では、RADIUSパケットに関して単語「不正な」を使用しています。 RFC 2865は、「不正な」の明示的な定義を提供しないが、不正な形式は、一般的に実装がいくつかの実装は、パケットが不正であると判断することができるRFC 2865で定義された形式と一致しないパケットを決定したことを意味する場合ベンダー固有属性(VSA)フォーマットは、RFCにVSAのための2865件の勧告に従っていません。これらの実装は、今日の展開で使用されるため、「不正な」の事実上の定義を設定しています。

3. The Internet-Standard Management Framework
3.インターネット標準管理フレームワーク

For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410].

現在のインターネット標準の管理フレームワークを記述したドキュメントの詳細な概要については、RFC 3410 [RFC3410]のセクション7を参照してください。

Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580].

管理対象オブジェクトが仮想情報店を介してアクセスされ、管理情報ベースまたはMIBと呼ばれます。 MIBオブジェクトは、一般的に簡易ネットワーク管理プロトコル(SNMP)を介してアクセスされます。 MIBのオブジェクトは、管理情報(SMI)の構造で定義されたメカニズムを使用して定義されています。このメモは、STD 58、RFC 2578 [RFC2578]、STD 58、RFC 2579 [RFC2579]とSTD 58、RFC 2580 [RFC2580]に記載されているSMIv2のに準拠しているMIBモジュールを指定します。

4. Scope of Changes
変更点の4範囲

This document obsoletes RFC 2618 [RFC2618], RADIUS Authentication Client MIB, by deprecating the radiusAuthServerTable table and adding a new table, radiusAuthServerExtTable, containing radiusAuthServerInetAddressType, radiusAuthServerInetAddress, and radiusAuthClientServerInetPortNumber. The purpose of these added MIB objects is to support version-neutral IP addressing formats. The existing table containing radiusAuthServerAddress and radiusAuthClientServerPortNumber is deprecated. The remaining MIB objects are carried forward from RFC 2618 into this document. This memo also adds UNITS and REFERENCE clauses to selected objects.

この文書は、radiusAuthServerTableテーブルを廃止し、新しいテーブルを追加、radiusAuthServerExtTable、radiusAuthServerInetAddressType、radiusAuthServerInetAddress、及びradiusAuthClientServerInetPortNumberを含有することにより、[RFC2618]、RADIUS認証クライアントMIBをRFC 2618時代遅れ。これらの追加されたMIBオブジェクトの目的は、バージョン中立のIPアドレス指定のフォーマットをサポートすることです。 radiusAuthServerAddressとradiusAuthClientServerPortNumberを含む既存の表には、推奨されていません。残りのMIBオブジェクトは、この文書にRFC 2618から前方に搬送されます。また、このメモは、選択したオブジェクトにUNITSとREFERENCE句を追加します。

RFC 4001 [RFC4001], which defines the SMI Textual Conventions for IPv6 addresses, contains the following recommendation.

IPv6アドレスのSMIテキストの表記法を定義するRFC 4001 [RFC4001]は、以下の勧告を含んでいます。

'In particular, when revising a MIB module that contains IPv4 specific tables, it is suggested to define new tables using the textual conventions defined in this memo [RFC4001] that support all versions of IP. The status of the new tables SHOULD be "current", whereas the status of the old IP version specific tables SHOULD be changed to "deprecated". The other approach, of having multiple similar tables for different IP versions, is strongly discouraged.'

「IPv4の特定のテーブルを含むMIBモジュールを修正するとき特に、それはIPのすべてのバージョンをサポートこのメモ[RFC4001]で定義されたテキストの表記法を使用して、新しいテーブルを定義することが提案されています。古いIPバージョン特定のテーブルのステータスは「非推奨」に変更する必要があり、一方、新しいテーブルのステータスは、「現在」であるべきです。他のアプローチは、異なるIPバージョンの複数の同様のテーブルを有することが強く推奨されます。」

5. Structure of the MIB Module
MIBモジュールの構造5.

The RADIUS authentication protocol, described in RFC 2865 [RFC2865], distinguishes between the client function and the server function. In RADIUS authentication, clients send Access-Requests, and servers reply with Access-Accepts, Access-Rejects, and Access-Challenges. Typically, Network Access Server (NAS) devices implement the client function, and thus would be expected to implement the RADIUS authentication client MIB, while RADIUS authentication servers implement the server function, and thus would be expected to implement the RADIUS authentication server MIB.

RADIUS認証プロトコル、RFC 2865 [RFC2865]で説明は、クライアント機能とサーバ機能を区別する。 RADIUS認証では、クライアントがアクセス・リクエストを送信し、サーバは、-受け入れAccessでのAccess-拒否し、アクセス-課題を返信します。一般的に、ネットワーク・アクセス・サーバ(NAS)デバイスは、クライアント機能を実装し、RADIUS認証サーバは、サーバ機能を実装しつつ、RADIUS認証クライアントMIBを実装することが予想されるため、RADIUS認証サーバのMIBを実装することが期待されます。

However, it is possible for a RADIUS authentication entity to perform both client and server functions. For example, a RADIUS proxy may act as a server to one or more RADIUS authentication clients, while simultaneously acting as an authentication client to one or more authentication servers. In such situations, it is expected that RADIUS entities combining client and server functionality will support both the client and server MIBs. The client MIB is defined in this document, and the server MIB is defined in [RFC4669].

RADIUS認証エンティティはクライアントとサーバーの両方の機能を実行するためにしかし、それは可能です。同時に1つ以上の認証サーバへの認証クライアントとして動作しているときにたとえば、RADIUSプロキシは、1つまたは複数のRADIUS認証クライアントに対してサーバとして動作することができます。このような状況では、クライアントとサーバーの機能を組み合わせたRADIUS実体はクライアントとサーバーの両方のMIBをサポートすることが期待されます。クライアントMIBは、この文書で定義されており、サーバーのMIBは[RFC4669]で定義されています。

This MIB module contains two scalars as well as a single table, the RADIUS Authentication Server Table, which contains one row for each RADIUS authentication server with which the client shares a secret. Each entry in the RADIUS Authentication Server Table includes sixteen columns presenting a view of the activity of the RADIUS authentication client.

このMIBモジュールは、2つのスカラならびに単一テーブルを含む、クライアントが秘密を共有する各RADIUS認証サーバのための1つの行を含んでRADIUS認証サーバテーブル、。 RADIUS認証サーバのテーブルの各エントリには、RADIUS認証クライアントの活動のビューを提示する16個の列が含まれています。

This MIB imports from [RFC2578], [RFC2580], [RFC3411], and [RFC4001].

[RFC2578]、[RFC2580]、[RFC3411]及び[RFC4001]からこのMIB輸入。

6. Deprecated Objects
6.非推奨のオブジェクト

The deprecated table in this MIB is carried forward from RFC 2618 [RFC2618]. There are two conditions under which it MAY be desirable for managed entities to continue to support the deprecated table:

このMIBに廃止予定表は、RFC 2618 [RFC2618]から繰り越されます。管理対象エンティティは廃止テーブルのサポートを継続することが望ましい場合がある下の2つの条件があります。

1. The managed entity only supports IPv4 address formats.
1.管理エンティティは、IPv4アドレスのみの形式をサポートしています。

2. The managed entity supports both IPv4 and IPv6 address formats, and the deprecated table is supported for backwards compatibility with older management stations. This option SHOULD only be used when the IP addresses in the new table are in IPv4 format and can accurately be represented in both the new table and the deprecated table.

2.管理エンティティは、IPv4とIPv6の両方のアドレス形式をサポートしており、廃止予定表は、古い管理ステーションとの後方互換性のためにサポートされています。新しいテーブル内のIPアドレスがIPv4形式で、正確に、新しいテーブルと廃止予定表の両方で表すことができる場合は、このオプションをのみ使用してください。

Managed entities SHOULD NOT instantiate row entries in the deprecated table, containing IPv4-only address objects, when the RADIUS server address represented in such a table row is not an IPv4 address. Managed entities SHOULD NOT return inaccurate values of IP address or SNMP object access errors for IPv4-only address objects in otherwise populated tables. When row entries exist in both the deprecated IPv4-only table and the new IP-version-neutral table that describe the same RADIUS server, the row indexes SHOULD be the same for the corresponding rows in each table, to facilitate correlation of these related rows by management applications.

そのような表の行に示されるRADIUSサーバアドレスがIPv4アドレスでない場合、管理対象エンティティは、IPv4専用アドレスオブジェクトを含む、廃止予定表の行エントリをインスタンス化すべきではありません。管理対象エンティティは、それ以外の場合は人口表にIPv4のみのアドレスオブジェクトのIPアドレスまたはSNMPオブジェクトアクセスエラーの不正確な値を返すべきではありません。行のエントリは、同じRADIUSサーバを記述する非推奨IPv4専用テーブルと新しいIPバージョン中立テーブルの両方に存在する場合、行インデックスは、これらの関連する行の相関を容易にするために、各テーブル内の対応する行に対して同じでなければなりません管理アプリケーションによって。

7. Definitions
7.定義
   RADIUS-AUTH-CLIENT-MIB DEFINITIONS ::= BEGIN
        

IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Counter32, Integer32, Gauge32, IpAddress, TimeTicks, mib-2 FROM SNMPv2-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF;

輸入MODULE-IDENTITY、OBJECT-TYPE、OBJECT-IDENTITY、Counter32の、構文Integer32、Gauge32、IPアドレス、時間刻み、MIB-2のSNMPv2-SMIれるSnmpAdminString FROM SNMP-FRAMEWORK-MIBのInetAddressType、InetAddressの、InetPortNumber FROM INET-ADDRESS-MIBモジュール - FROM SNMPv2の-CONFからのコンプライアンス、OBJECT-GROUP;

radiusAuthClientMIB MODULE-IDENTITY LAST-UPDATED "200608210000Z" -- 21 August 2006 ORGANIZATION "IETF RADIUS Extensions Working Group." CONTACT-INFO " Bernard Aboba Microsoft One Microsoft Way Redmond, WA 98052

radiusAuthClientMIBのMODULE-IDENTITY LAST-UPDATED "200608210000Z" - "IETF RADIUS拡張作業部会" 2006年8月21日ORGANIZATION CONTACT-INFO "バーナードAbobaマイクロソフト1マイクロソフト道、レッドモンド、ワシントン98052

                   US
                   Phone: +1 425 936 6605
                   EMail: bernarda@microsoft.com"
          DESCRIPTION
                "The MIB module for entities implementing the client
                 side of the Remote Authentication Dial-In User Service
                 (RADIUS) authentication protocol.  Copyright (C) The
                 Internet Society (2006).  This version of this MIB
                 module is part of RFC 4668; see the RFC itself for
                 full legal notices."
          REVISION "200608210000Z"  --  21 August 2006
          DESCRIPTION
                 "Revised version as published in RFC 4668.  This
                  version obsoletes that of RFC 2618 by deprecating
                  the MIB table containing IPv4-only address formats
                  and defining a new table to add support for version
                  neutral IP address formats.  The remaining MIB objects
                  from RFC 2618 are carried forward into this version."
          REVISION "199906110000Z"    -- 11 Jun 1999
          DESCRIPTION "Initial version as published in RFC 2618."
          ::= { radiusAuthentication 2 }
        
   radiusMIB OBJECT-IDENTITY
          STATUS  current
          DESCRIPTION
                "The OID assigned to RADIUS MIB work by the IANA."
           ::= { mib-2 67 }
        
   radiusAuthentication  OBJECT IDENTIFIER ::= {radiusMIB 1}
        
   radiusAuthClientMIBObjects  OBJECT IDENTIFIER
           ::= { radiusAuthClientMIB 1 }
        
   radiusAuthClient  OBJECT IDENTIFIER
           ::= { radiusAuthClientMIBObjects 1 }
        
   radiusAuthClientInvalidServerAddresses OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of RADIUS Access-Response packets
                received from unknown addresses."
         ::= { radiusAuthClient 1 }
        

radiusAuthClientIdentifier OBJECT-TYPE SYNTAX SnmpAdminString

radiusAuthClientIdentifierのOBJECT-TYPE SYNTAXれるSnmpAdminString

         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
                "The NAS-Identifier of the RADIUS authentication client.
                 This is not necessarily the same as sysName in MIB II."
         REFERENCE "RFC 2865 section 5.32"
         ::= { radiusAuthClient 2 }
        
   radiusAuthServerTable OBJECT-TYPE
         SYNTAX     SEQUENCE OF RadiusAuthServerEntry
         MAX-ACCESS not-accessible
         STATUS     deprecated
         DESCRIPTION
               "The (conceptual) table listing the RADIUS authentication
                servers with which the client shares a secret."
         ::= { radiusAuthClient 3 }
        
   radiusAuthServerEntry OBJECT-TYPE
         SYNTAX     RadiusAuthServerEntry
         MAX-ACCESS not-accessible
         STATUS     deprecated
         DESCRIPTION
               "An entry (conceptual row) representing a RADIUS
                authentication server with which the client shares
                a secret."
         INDEX      { radiusAuthServerIndex }
         ::= { radiusAuthServerTable 1 }
        
   RadiusAuthServerEntry ::= SEQUENCE {
         radiusAuthServerIndex                           Integer32,
         radiusAuthServerAddress                         IpAddress,
         radiusAuthClientServerPortNumber                Integer32,
         radiusAuthClientRoundTripTime                   TimeTicks,
         radiusAuthClientAccessRequests                  Counter32,
         radiusAuthClientAccessRetransmissions           Counter32,
         radiusAuthClientAccessAccepts                   Counter32,
         radiusAuthClientAccessRejects                   Counter32,
         radiusAuthClientAccessChallenges                Counter32,
         radiusAuthClientMalformedAccessResponses        Counter32,
         radiusAuthClientBadAuthenticators               Counter32,
         radiusAuthClientPendingRequests                   Gauge32,
         radiusAuthClientTimeouts                        Counter32,
         radiusAuthClientUnknownTypes                    Counter32,
         radiusAuthClientPacketsDropped                  Counter32
   }
        

radiusAuthServerIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647)

radiusAuthServerIndexのOBJECT-TYPE構文Integer32(1 2147483647)

         MAX-ACCESS not-accessible
         STATUS     deprecated
         DESCRIPTION
                "A number uniquely identifying each RADIUS
                Authentication server with which this client
                communicates."
         ::= { radiusAuthServerEntry 1 }
        
   radiusAuthServerAddress OBJECT-TYPE
         SYNTAX     IpAddress
         MAX-ACCESS read-only
         STATUS     deprecated
         DESCRIPTION
               "The IP address of the RADIUS authentication server
                referred to in this table entry."
         ::= { radiusAuthServerEntry 2 }
        
   radiusAuthClientServerPortNumber  OBJECT-TYPE
         SYNTAX Integer32 (0..65535)
         MAX-ACCESS read-only
         STATUS deprecated
         DESCRIPTION
               "The UDP port the client is using to send requests to
                this server."
         REFERENCE "RFC 2865 section 3"
         ::= { radiusAuthServerEntry 3 }
        
   radiusAuthClientRoundTripTime  OBJECT-TYPE
         SYNTAX TimeTicks
         MAX-ACCESS read-only
         STATUS deprecated
         DESCRIPTION
               "The time interval (in hundredths of a second) between
                the most recent Access-Reply/Access-Challenge and the
                Access-Request that matched it from this RADIUS
                authentication server."
         ::= { radiusAuthServerEntry 4 }
        

-- Request/Response statistics -- -- TotalIncomingPackets = Accepts + Rejects + Challenges + -- UnknownTypes -- -- TotalIncomingPackets - MalformedResponses - -- BadAuthenticators - UnknownTypes - PacketsDropped = -- Successfully received -- -- AccessRequests + PendingRequests + ClientTimeouts =

- 要求/応答の統計情報 - - UnknownTypes - - - TotalIncomingPackets - MalformedResponses - - BadAuthenticators - UnknownTypes - PacketsDropped = - 正常に受信 - - AccessRequests + PendingRequests + ClientTimeouts TotalIncomingPackets =は+リジェクツ+課題+を受け入れ=

-- Successfully received -- --

- 正常に受信 - -

   radiusAuthClientAccessRequests OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS deprecated
         DESCRIPTION
               "The number of RADIUS Access-Request packets sent
                to this server.  This does not include retransmissions."
         REFERENCE "RFC 2865 section 4.1"
         ::= { radiusAuthServerEntry 5 }
        
   radiusAuthClientAccessRetransmissions OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS deprecated
         DESCRIPTION
               "The number of RADIUS Access-Request packets
                retransmitted to this RADIUS authentication server."
         REFERENCE "RFC 2865 sections 2.5, 4.1"
         ::= { radiusAuthServerEntry 6 }
        
   radiusAuthClientAccessAccepts OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS deprecated
         DESCRIPTION
               "The number of RADIUS Access-Accept packets
                (valid or invalid) received from this server."
         REFERENCE "RFC 2865 section 4.2"
         ::= { radiusAuthServerEntry 7 }
        
   radiusAuthClientAccessRejects OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS deprecated
         DESCRIPTION
               "The number of RADIUS Access-Reject packets
                (valid or invalid) received from this server."
         REFERENCE "RFC 2865 section 4.3"
         ::= { radiusAuthServerEntry  8 }
        
   radiusAuthClientAccessChallenges OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS deprecated
         DESCRIPTION
               "The number of RADIUS Access-Challenge packets
                (valid or invalid) received from this server."
         REFERENCE "RFC 2865 section 4.4"
         ::= { radiusAuthServerEntry 9 }
        

-- "Access-Response" includes an Access-Accept, Access-Challenge -- or Access-Reject

- 「アクセスレスポンスは、」アクセス・受け入れ、アクセスチャレンジを含んでいる - またはアクセス拒否します

   radiusAuthClientMalformedAccessResponses OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS deprecated
         DESCRIPTION
               "The number of malformed RADIUS Access-Response
                packets received from this server.
                Malformed packets include packets with
                an invalid length.  Bad authenticators or
                Message Authenticator attributes or unknown types
                are not included as malformed access responses."
         ::= { radiusAuthServerEntry 10 }
        
   radiusAuthClientBadAuthenticators OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS deprecated
         DESCRIPTION
               "The number of RADIUS Access-Response packets
                containing invalid authenticators or Message
                Authenticator attributes received from this server."
         REFERENCE "RFC 2865 section 3, RFC 2869 section 5.14"
         ::= { radiusAuthServerEntry 11 }
        
   radiusAuthClientPendingRequests OBJECT-TYPE
         SYNTAX Gauge32
         MAX-ACCESS read-only
         STATUS deprecated
         DESCRIPTION
               "The number of RADIUS Access-Request packets
                destined for this server that have not yet timed out
                or received a response.  This variable is incremented when an Access-Request is sent and decremented due to
                receipt of an Access-Accept, Access-Reject,
                Access-Challenge, timeout, or retransmission."
         REFERENCE "RFC 2865 section 2"
         ::= { radiusAuthServerEntry 12 }
        
   radiusAuthClientTimeouts OBJECT-TYPE
        SYNTAX Counter32
        UNITS "timeouts"
        MAX-ACCESS read-only
        STATUS deprecated
        DESCRIPTION
               "The number of authentication timeouts to this server.
                After a timeout, the client may retry to the same
                server, send to a different server, or
                give up.  A retry to the same server is counted as a
                retransmit as well as a timeout.  A send to a different
                server is counted as a Request as well as a timeout."
                REFERENCE "RFC 2865 section 2, RFC 2869 section 2.3.2"
         ::= { radiusAuthServerEntry  13 }
        
   radiusAuthClientUnknownTypes OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS deprecated
         DESCRIPTION
               "The number of RADIUS packets of unknown type that
                were received from this server on the authentication
                port."
         ::= { radiusAuthServerEntry  14 }
        
   radiusAuthClientPacketsDropped OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS deprecated
         DESCRIPTION
               "The number of RADIUS packets that were
                received from this server on the authentication port
                and dropped for some other reason."
         ::= { radiusAuthServerEntry  15 }
        

-- New MIB Objects in this revision

- このリビジョンの新しいMIBオブジェクト

radiusAuthServerExtTable OBJECT-TYPE SYNTAX SEQUENCE OF RadiusAuthServerExtEntry

RadiusAuthServerExtEntry OF radiusAuthServerExtTable OBJECT-TYPE構文配列

         MAX-ACCESS not-accessible
         STATUS     current
         DESCRIPTION
               "The (conceptual) table listing the RADIUS authentication
                servers with which the client shares a secret."
         ::= { radiusAuthClient 4 }
        
   radiusAuthServerExtEntry OBJECT-TYPE
         SYNTAX     RadiusAuthServerExtEntry
         MAX-ACCESS not-accessible
         STATUS     current
         DESCRIPTION
               "An entry (conceptual row) representing a RADIUS
                authentication server with which the client shares
                a secret."
         INDEX      { radiusAuthServerExtIndex }
         ::= { radiusAuthServerExtTable 1 }
        
   RadiusAuthServerExtEntry ::= SEQUENCE {
         radiusAuthServerExtIndex                     Integer32,
         radiusAuthServerInetAddressType              InetAddressType,
         radiusAuthServerInetAddress                  InetAddress,
         radiusAuthClientServerInetPortNumber         InetPortNumber,
         radiusAuthClientExtRoundTripTime             TimeTicks,
         radiusAuthClientExtAccessRequests            Counter32,
         radiusAuthClientExtAccessRetransmissions     Counter32,
         radiusAuthClientExtAccessAccepts             Counter32,
         radiusAuthClientExtAccessRejects             Counter32,
         radiusAuthClientExtAccessChallenges          Counter32,
         radiusAuthClientExtMalformedAccessResponses  Counter32,
         radiusAuthClientExtBadAuthenticators         Counter32,
         radiusAuthClientExtPendingRequests           Gauge32,
         radiusAuthClientExtTimeouts                  Counter32,
         radiusAuthClientExtUnknownTypes              Counter32,
         radiusAuthClientExtPacketsDropped            Counter32,
         radiusAuthClientCounterDiscontinuity         TimeTicks
   }
        
   radiusAuthServerExtIndex OBJECT-TYPE
         SYNTAX     Integer32 (1..2147483647)
         MAX-ACCESS not-accessible
         STATUS     current
         DESCRIPTION
                "A number uniquely identifying each RADIUS
                Authentication server with which this client
                communicates."
         ::= { radiusAuthServerExtEntry 1 }
        
   radiusAuthServerInetAddressType OBJECT-TYPE
         SYNTAX     InetAddressType
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
               "The type of address format used for the
                radiusAuthServerInetAddress object."
         ::= { radiusAuthServerExtEntry 2 }
        
   radiusAuthServerInetAddress OBJECT-TYPE
         SYNTAX     InetAddress
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
               "The IP address of the RADIUS authentication
                server referred to in this table entry, using
                the version-neutral IP address format."
         ::= { radiusAuthServerExtEntry 3 }
        
   radiusAuthClientServerInetPortNumber  OBJECT-TYPE
         SYNTAX InetPortNumber ( 1..65535 )
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The UDP port the client is using to send requests
                to this server.  The value of zero (0) is invalid."
         REFERENCE "RFC 2865 section 3"
         ::= { radiusAuthServerExtEntry 4 }
        
   radiusAuthClientExtRoundTripTime  OBJECT-TYPE
         SYNTAX TimeTicks
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The time interval (in hundredths of a second) between
                the most recent Access-Reply/Access-Challenge and the
                Access-Request that matched it from this RADIUS
                authentication server."
         REFERENCE "RFC 2865 section 2"
         ::= { radiusAuthServerExtEntry 5 }
        

-- Request/Response statistics -- -- TotalIncomingPackets = Accepts + Rejects + Challenges + -- UnknownTypes -- -- TotalIncomingPackets - MalformedResponses - -- BadAuthenticators - UnknownTypes - PacketsDropped =

- 要求/応答の統計情報 - - TotalIncomingPackets =受け入れ+リジェクツ+課題+ - UnknownTypes - - TotalIncomingPackets - MalformedResponses - - BadAuthenticators - UnknownTypes - PacketsDropped =

-- Successfully received -- -- AccessRequests + PendingRequests + ClientTimeouts = -- Successfully received -- --

- 正常に受信 - - AccessRequests + + ClientTimeouts = PendingRequests - 正常に受信 - -

   radiusAuthClientExtAccessRequests OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of RADIUS Access-Request packets sent
                to this server.  This does not include retransmissions.
                This counter may experience a discontinuity when the
                RADIUS Client module within the managed entity is
                reinitialized, as indicated by the current value of
                radiusAuthClientCounterDiscontinuity."
         REFERENCE "RFC 2865 section 4.1"
         ::= { radiusAuthServerExtEntry 6 }
        
   radiusAuthClientExtAccessRetransmissions OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of RADIUS Access-Request packets
                retransmitted to this RADIUS authentication server.
                This counter may experience a discontinuity when
                the RADIUS Client module within the managed entity
                is reinitialized, as indicated by the current value
                of radiusAuthClientCounterDiscontinuity."
         REFERENCE "RFC 2865 sections 2.5, 4.1"
         ::= { radiusAuthServerExtEntry 7 }
        
   radiusAuthClientExtAccessAccepts OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of RADIUS Access-Accept packets
                (valid or invalid) received from this server.
                This counter may experience a discontinuity when
                the RADIUS Client module within the managed entity
                is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity."
         REFERENCE "RFC 2865 section 4.2"
         ::= { radiusAuthServerExtEntry 8 }
        
   radiusAuthClientExtAccessRejects OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of RADIUS Access-Reject packets
                (valid or invalid) received from this server.
                This counter may experience a discontinuity when
                the RADIUS Client module within the managed
                entity is reinitialized, as indicated by the
                current value of
                radiusAuthClientCounterDiscontinuity."
         REFERENCE "RFC 2865 section 4.3"
         ::= { radiusAuthServerExtEntry  9 }
        
   radiusAuthClientExtAccessChallenges OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of RADIUS Access-Challenge packets
                (valid or invalid) received from this server.
                This counter may experience a discontinuity when
                the RADIUS Client module within the managed
                entity is reinitialized, as indicated by the
                current value of
                radiusAuthClientCounterDiscontinuity."
         REFERENCE "RFC 2865 section 4.4"
         ::= { radiusAuthServerExtEntry 10 }
        

-- "Access-Response" includes an Access-Accept, Access-Challenge, -- or Access-Reject

- 「アクセスレスポンスは、」アクセス・受け入れ、アクセスチャレンジを、含まれています - またはアクセス拒否します

   radiusAuthClientExtMalformedAccessResponses OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of malformed RADIUS Access-Response
                packets received from this server.
                Malformed packets include packets with an invalid length.  Bad authenticators or
                Message Authenticator attributes or unknown types
                are not included as malformed access responses.
                This counter may experience a discontinuity when
                the RADIUS Client module within the managed entity
                is reinitialized, as indicated by the current value
                of radiusAuthClientCounterDiscontinuity."
         REFERENCE "RFC 2865 sections 3, 4"
         ::= { radiusAuthServerExtEntry 11 }
        
   radiusAuthClientExtBadAuthenticators OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of RADIUS Access-Response packets
                containing invalid authenticators or Message
                Authenticator attributes received from this server.
                This counter may experience a discontinuity when
                the RADIUS Client module within the managed entity
                is reinitialized, as indicated by the current value
                of radiusAuthClientCounterDiscontinuity."
         REFERENCE "RFC 2865 section 3"
         ::= { radiusAuthServerExtEntry 12 }
        
   radiusAuthClientExtPendingRequests OBJECT-TYPE
         SYNTAX Gauge32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of RADIUS Access-Request packets
                destined for this server that have not yet timed out
                or received a response.  This variable is incremented
                when an Access-Request is sent and decremented due to
                receipt of an Access-Accept, Access-Reject,
                Access-Challenge, timeout, or retransmission."
         REFERENCE "RFC 2865 section 2"
         ::= { radiusAuthServerExtEntry 13 }
        

radiusAuthClientExtTimeouts OBJECT-TYPE SYNTAX Counter32 UNITS "timeouts" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of authentication timeouts to this server.

radiusAuthClientExtTimeouts OBJECT-TYPE SYNTAX Counter32ユニット「タイムアウト」MAX-ACCESS read-onlyステータス現在の説明「このサーバへの認証タイムアウトの数。

                After a timeout, the client may retry to the same
                server, send to a different server, or
                give up.  A retry to the same server is counted as a
                retransmit as well as a timeout.  A send to a different
                server is counted as a Request as well as a timeout.
                This counter may experience a discontinuity when the
                RADIUS Client module within the managed entity is
                reinitialized, as indicated by the current value of
                radiusAuthClientCounterDiscontinuity."
         REFERENCE "RFC 2865 sections 2.5, 4.1"
         ::= { radiusAuthServerExtEntry  14 }
        
   radiusAuthClientExtUnknownTypes OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of RADIUS packets of unknown type that
                were received from this server on the authentication
                port.  This counter may experience a discontinuity
                when the RADIUS Client module within the managed
                entity is reinitialized, as indicated by the current
                value of radiusAuthClientCounterDiscontinuity."
                REFERENCE "RFC 2865 section 4"
         ::= { radiusAuthServerExtEntry  15 }
        
   radiusAuthClientExtPacketsDropped OBJECT-TYPE
         SYNTAX Counter32
         UNITS "packets"
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of RADIUS packets that were
                received from this server on the authentication port
                and dropped for some other reason.  This counter may
                experience a discontinuity when the RADIUS Client
                module within the managed entity is reinitialized,
                as indicated by the current value of
                radiusAuthClientCounterDiscontinuity."
         ::= { radiusAuthServerExtEntry  16 }
        

radiusAuthClientCounterDiscontinuity OBJECT-TYPE SYNTAX TimeTicks UNITS "centiseconds" MAX-ACCESS read-only STATUS current DESCRIPTION

radiusAuthClientCounterDiscontinuityのOBJECT-TYPE構文TimeTicksのUNITSの "センチ" MAX-ACCESS read-onlyステータス現在の説明

               "The number of centiseconds since the last discontinuity
                in the RADIUS Client counters.  A discontinuity may
                be the result of a reinitialization of the RADIUS
                Client module within the managed entity."
         ::= { radiusAuthServerExtEntry 17 }
        

-- conformance information

- 適合情報

   radiusAuthClientMIBConformance OBJECT IDENTIFIER
           ::= { radiusAuthClientMIB 2 }
        
   radiusAuthClientMIBCompliances OBJECT IDENTIFIER
           ::= { radiusAuthClientMIBConformance 1 }
        
   radiusAuthClientMIBGroups OBJECT IDENTIFIER
           ::= { radiusAuthClientMIBConformance 2 }
        

-- compliance statements

- コンプライアンスステートメント

radiusAuthClientMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for authentication clients implementing the RADIUS Authentication Client MIB. Implementation of this module is for IPv4-only entities, or for backwards compatibility use with entities that support both IPv4 and IPv6." MODULE -- this module MANDATORY-GROUPS { radiusAuthClientMIBGroup }

radiusAuthClientMIBCompliance MODULE-COMPLIANCEステータスは非難された説明「RADIUS認証クライアントMIBを実装する認証クライアントのための準拠宣言。このモジュールの実装は、IPv4のみのエンティティのため、またはIPv4とIPv6の両方をサポートするエンティティとの後方互換性を使用するためです。」 MODULE - このモジュールMANDATORY-GROUPS {radiusAuthClientMIBGroup}

        ::= { radiusAuthClientMIBCompliances 1 }
        

radiusAuthClientExtMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for authentication clients implementing the RADIUS Authentication Client IPv6 Extensions MIB. Implementation of this module is for entities that support IPv6, or support IPv4 and IPv6." MODULE -- this module MANDATORY-GROUPS { radiusAuthClientExtMIBGroup }

radiusAuthClientExtMIBCompliance MODULE-COMPLIANCEステータス現在の説明「RADIUS認証クライアントのIPv6拡張機能MIBを実装する認証クライアントのための準拠宣言。このモジュールの実装は、IPv6をサポートするエンティティのためである、またはIPv4とIPv6をサポートしています。」 MODULE - このモジュールMANDATORY-GROUPS {radiusAuthClientExtMIBGroup}

        OBJECT radiusAuthServerInetAddressType
        SYNTAX InetAddressType { ipv4(1), ipv6(2) }
        DESCRIPTION
        
              "An implementation is only required to support
               IPv4 and globally unique IPv6 addresses."
        
        OBJECT radiusAuthServerInetAddress
        SYNTAX InetAddress ( SIZE (4|16) )
        DESCRIPTION
              "An implementation is only required to support
               IPv4 and globally unique IPv6 addresses."
        ::= { radiusAuthClientMIBCompliances 2 }
        

-- units of conformance

- 適合の単位

   radiusAuthClientMIBGroup OBJECT-GROUP
        OBJECTS { radiusAuthClientIdentifier,
                  radiusAuthClientInvalidServerAddresses,
                  radiusAuthServerAddress,
                  radiusAuthClientServerPortNumber,
                  radiusAuthClientRoundTripTime,
                  radiusAuthClientAccessRequests,
                  radiusAuthClientAccessRetransmissions,
                  radiusAuthClientAccessAccepts,
                  radiusAuthClientAccessRejects,
                  radiusAuthClientAccessChallenges,
                  radiusAuthClientMalformedAccessResponses,
                  radiusAuthClientBadAuthenticators,
                  radiusAuthClientPendingRequests,
                  radiusAuthClientTimeouts,
                  radiusAuthClientUnknownTypes,
                  radiusAuthClientPacketsDropped
               }
        STATUS  deprecated
        DESCRIPTION
              "The basic collection of objects providing management of
               RADIUS Authentication Clients."
        ::= { radiusAuthClientMIBGroups 1 }
        
   radiusAuthClientExtMIBGroup OBJECT-GROUP
        OBJECTS { radiusAuthClientIdentifier,
                  radiusAuthClientInvalidServerAddresses,
                  radiusAuthServerInetAddressType,
                  radiusAuthServerInetAddress,
                  radiusAuthClientServerInetPortNumber,
                  radiusAuthClientExtRoundTripTime,
                  radiusAuthClientExtAccessRequests,
                  radiusAuthClientExtAccessRetransmissions,
                  radiusAuthClientExtAccessAccepts, radiusAuthClientExtAccessRejects,
                  radiusAuthClientExtAccessChallenges,
                  radiusAuthClientExtMalformedAccessResponses,
                  radiusAuthClientExtBadAuthenticators,
                  radiusAuthClientExtPendingRequests,
                  radiusAuthClientExtTimeouts,
                  radiusAuthClientExtUnknownTypes,
                  radiusAuthClientExtPacketsDropped,
                  radiusAuthClientCounterDiscontinuity
               }
        STATUS  current
        DESCRIPTION
              "The collection of extended objects providing
               management of RADIUS Authentication Clients
               using version-neutral IP address format."
        ::= { radiusAuthClientMIBGroups 2 }
        

END

終わり

8. Security Considerations
8.セキュリティの考慮事項

There are no management objects defined in this MIB that have a MAX-ACCESS clause of read-write and/or read-create. So, if this MIB is implemented correctly, then there is no risk that an intruder can alter or create any management objects of this MIB via direct SNMP SET operations.

読み書きおよび/またはリード作成のMAX-ACCESS節を持っているこのMIBで定義された管理オブジェクトがありません。このMIBが正しく実装されているのであれば、その後、侵入者が変更またはダイレクトSNMP SET操作を経て、このMIBのあらゆる管理オブジェクトを作成することができるというリスクはありません。

Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over the network via SNMP. These are the tables and objects and their sensitivity/vulnerability:

このMIBモジュールで読み取り可能なオブジェクトの一部(すなわち、アクセス可能ではない以外MAX-ACCESS持つオブジェクト)は、いくつかのネットワーク環境に敏感又は脆弱と考えることができます。 GETおよび/またはこれらのオブジェクトへのアクセスを通知し、おそらくSNMPを通してネットワークの上にそれらを送信する場合でも、これらのオブジェクトの値を暗号化するためにも、制御することが重要です。これらは、テーブルと、オブジェクトとそれらの感度/脆弱性です:

radiusAuthServerIPAddress This can be used to determine the address of the RADIUS authentication server with which the client is communicating. This information could be useful in mounting an attack on the authentication server.

radiusAuthServerIPAddressこれは、クライアントが通信しているRADIUS認証サーバのアドレスを決定するために使用することができます。この情報は、認証サーバへの攻撃を装着する際に有用である可能性があります。

radiusAuthClientServerPortNumber This can be used to determine the port number on which the RADIUS authentication client is sending. This information could be useful in impersonating the client in order to send data to the authentication server.

radiusAuthClientServerPortNumberこれは、RADIUS認証クライアントが送信しているポート番号を決定するために使用することができます。この情報は、認証サーバにデータを送信するためにクライアントを偽装するのに有用である可能性があります。

radiusAuthServerInetAddress This can be used to determine the address of the RADIUS authentication server with which the client is communicating. This information could be useful in mounting an attack on the authentication server.

radiusAuthServerInetAddressこれは、クライアントが通信しているRADIUS認証サーバのアドレスを決定するために使用することができます。この情報は、認証サーバへの攻撃を装着する際に有用である可能性があります。

radiusAuthClientServerInetPortNumber This can be used to determine the port number on which the RADIUS authentication client is sending. This information could be useful in impersonating the client in order to send data to the authentication server.

radiusAuthClientServerInetPortNumberこれは、RADIUS認証クライアントが送信しているポート番号を決定するために使用することができます。この情報は、認証サーバにデータを送信するためにクライアントを偽装するのに有用である可能性があります。

SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module.

SNMPv3の前のSNMPバージョンは十分なセキュリティを含んでいませんでした。ネットワーク自体が(IPsecを使って、例えば)安全であっても、その後も、安全なネットワーク上で/ SETにアクセスし、GETだれに許容されているかのように何の制御(読み取り/変更/作成/削除)この内のオブジェクトが存在しませんMIBモジュール。

It is RECOMMENDED that implementers consider the security features as provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy).

実装がSNMPv3フレームワークで提供するようにセキュリティ機能を考えることが推奨される(認証とプライバシーのために)SNMPv3の暗号化メカニズムの完全なサポートを含む、([RFC3410]セクション8を参照)。

Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them.

さらに、SNMPv3の前のSNMPバージョンの展開はお勧めしません。代わりに、SNMPv3を展開すると、暗号化セキュリティを有効にすることをお勧めします。このMIBモジュールのインスタンスへのアクセスを与えるSNMP実体が適切にのみプリンシパル(ユーザ)にオブジェクトへのアクセスを提供するように設定されていることを確認するために、顧客/オペレータ責任実際にGETまたはSET(変化への正当な権利を有することです/)/削除、それらを作成します。

9. References
9.参考文献
9.1. Normative References
9.1. 引用規格

[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.

[RFC2119]ブラドナーの、S.、 "要件レベルを示すためにRFCsにおける使用のためのキーワード"、BCP 14、RFC 2119、1997年3月。

[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.

[RFC2578] McCloghrie、K.、エド。、パーキンス、D.、編、及びJ. Schoenwaelder、編、STD 58、RFC 2578、1999年4月、 "管理情報バージョン2(SMIv2)の構造"。

[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999.

[RFC2579] McCloghrie、K.、エド。、パーキンス、D.、編、及びJ. Schoenwaelder、エド。、 "SMIv2のためのテキストの表記法"、STD 58、RFC 2579、1999年4月。

[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999.

[RFC2580] McCloghrie、K.、パーキンス、D.、およびJ. Schoenwaelder、 "SMIv2のための適合性宣言"、STD 58、RFC 2580、1999年4月。

[RFC2865] Rigney, C., Willens, S., Rubens, A., and W. Simpson, "Remote Authentication Dial In User Service (RADIUS)", RFC 2865, June 2000.

[RFC2865] Rigney、C.、ウィレンス、S.、ルーベン、A.、およびW.シンプソン、RFC 2865、2000年6月 "ユーザーサービス(RADIUS)でリモート認証ダイヤル"。

[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks", STD 62, RFC 3411, December 2002.

[RFC3411]ハリントン、D.、Presuhn、R.、およびB. Wijnenの、 "簡易ネットワーク管理プロトコル(SNMP)管理フレームワークを記述するためのアーキテクチャ"、STD 62、RFC 3411、2002年12月。

[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J. Schoenwaelder, "Textual Conventions for Internet Network Addresses", RFC 4001, February 2005.

[RFC4001]ダニエル、M.、ハーバーマン、B.、Routhier、S.、およびJ. Schoenwaelder、 "インターネットネットワークアドレスのためのテキストの表記法"、RFC 4001、2005年2月。

9.2. Informative References
9.2. 参考文献

[RFC2618] Aboba, B. and G. Zorn, "RADIUS Authentication Client MIB", RFC 2618, June 1999.

[RFC2618] Aboba、B.およびG.ゾルン、 "RADIUS認証クライアントMIB"、RFC 2618、1999年6月。

[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet-Standard Management Framework", RFC 3410, December 2002.

[RFC3410]ケース、J.、マンディ、R.、パーテイン、D.、およびB.スチュワート、 "インターネット標準の管理フレームワークのための序論と適用性声明"、RFC 3410、2002年12月。

[RFC4669] Nelson, D., "RADIUS Authentication Server MIB for IPv6", RFC 4669, August 2006.

[RFC4669]ネルソン、D.、 "IPv6のためのRADIUS認証サーバのMIB"、RFC 4669、2006年8月。

Appendix A. Acknowledgements

付録A.謝辞

The authors of the original MIB are Bernard Aboba and Glen Zorn.

オリジナルのMIBの作者はバーナードAbobaとグレンツォルンです。

Many thanks to all reviewers, especially to Dave Harrington, Dan Romascanu, C.M. Heard, Bruno Pape, Greg Weber, and Bert Wijnen.

特にデイブ・ハリントン、ダンRomascanu、C.M。へのすべてのレビューに感謝し、ブルーノ・パプ、グレッグ・ウェーバー、およびバートWijnenは、聞きました。

Author's Address

著者のアドレス

David B. Nelson Enterasys Networks 50 Minuteman Road Andover, MA 01810 USA

デビッド・B・ネルソンのEnterasys Networksの50ミニット・ロードアンドーバー、MA 01810 USA

EMail: dnelson@enterasys.com

メールアドレス:dnelson@enterasys.com

Full Copyright Statement

完全な著作権声明

Copyright (C) The Internet Society (2006).

著作権(C)インターネット協会(2006)。

This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.

この文書では、BCP 78に含まれる権利と許可と制限の適用を受けており、その中の記載を除いて、作者は彼らのすべての権利を保有します。

This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

この文書とここに含まれている情報は、基礎とCONTRIBUTOR「そのまま」、ORGANIZATION HE / SHEが表すまたはインターネットソサエティおよびインターネット・エンジニアリング・タスク・フォース放棄すべての保証、明示または、(もしあれば)後援ISに設けられています。黙示、情報の利用は、特定の目的に対する権利または商品性または適合性の黙示の保証を侵害しない任意の保証含むがこれらに限定されません。

Intellectual Property

知的財産

The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.

IETFは、本書またはそのような権限下で、ライセンスがたりないかもしれない程度に記載された技術の実装や使用に関係すると主張される可能性があります任意の知的財産権やその他の権利の有効性または範囲に関していかなる位置を取りません利用可能です。またそれは、それがどのような権利を確認する独自の取り組みを行ったことを示すものでもありません。 RFC文書の権利に関する手続きの情報は、BCP 78およびBCP 79に記載されています。

Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.

IPRの開示のコピーが利用できるようにIETF事務局とライセンスの保証に行われた、または本仕様の実装者または利用者がそのような所有権の使用のための一般的なライセンスまたは許可を取得するために作られた試みの結果を得ることができますhttp://www.ietf.org/iprのIETFのオンラインIPRリポジトリから。

The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org.

IETFは、その注意にこの標準を実装するために必要とされる技術をカバーすることができる任意の著作権、特許または特許出願、またはその他の所有権を持ってすべての利害関係者を招待します。 ietf-ipr@ietf.orgのIETFに情報を記述してください。

Acknowledgement

謝辞

Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA).

RFCエディタ機能のための資金は、IETF管理サポート活動(IASA)によって提供されます。